Video Transcript for Let’s Check Out the Replacement Attachment Bolt

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Phoenix USA replacement hub cover attachment bolt. This is going to replace one left-hand thread center attachment bolt for your Phoenix USA wheel hub covers. This will work for the Phoenix USA wheel center caps models that you see on the screen there. So, you do want to make sure that you are needing the left-hand thread bolt for your set up. And if that is the case, this is going to be the exact replacement from Phoenix USA for you.

If you can see, this is going to be our 73 millimeter hex head. We've got our M10 by 1 1/4 milometer left-hand oriented bolt here with our usable length being right at 82 millimeters. So as I said, this is the left-hand thread orientation. We also have the right-hand thread orientation available. You can find that here at etrailer.com using the part number that you see on the top there.

That would be for the same 82 millimeter length. And then we also have a right-hand oriented 97 millimeter length option, that would be for your extra large hub covers. So, make sure you're getting the right one for your set up. They are all from Phoenix USA, so you can trust they are gonna do a great job for you, the exact replacement. You just wanna make sure you're getting the right thread and length.

So, that completes our look for today. Again, I'm Michael with etrailer.com, thanks for watching..