To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you’re carrying tools, camping gear, or valuables, you need real protection—not fabric. The RetraxPRO MX uses impact-resistant, 1" thick aluminum slats that lock down tight to keep your cargo safe from both weather and theft. Close the cover and latch it at any point along the rails to conceal items in the front of the bed while leaving space for longer loads in back. When locked in conjunction with the tailgate, this setup makes it nearly impossible to pry open or cut through.
Some covers bind or need constant adjustment. The RetraxPRO MX glides along sealed ball-bearing rollers that don’t need lubrication, so it opens easily with one hand using the pop-up handle. The spiral track system guides the cover into the canister without rubbing against itself, preventing wear over time. You can stop it anywhere along the rails for partial coverage or roll it all the way in for full bed access in seconds.
Rain, snow, and dust can ruin whatever’s in your bed. This cover seals tight on all sides with weather stripping and foam seals that conform to the bed rails and overlap the top of the tailgate. Any water that gets into the canister is routed out through two built-in drain tubes, keeping the stored cover dry and mildew-free. The result is dependable protection through every season.
From the 500 lb evenly distributed weight rating to the scratch-resistant matte black finish, this cover is made to take abuse without losing its sleek look. The aluminum panels resist dents and fading even after years in the sun or under heavy snow. The low-profile rails sit just 1" above the bed for a clean, streamlined appearance that doesn’t get in the way.
Installing the RetraxPRO MX doesn’t require drilling or complicated adjustments. The pre-assembled cover drops in place and clamps onto the bed rails using bolt-on clamps. Once the drain tubes are routed through the factory bed holes, you’re ready to go. It’s a solid, professional-grade install that you can set up without special tools.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the RetraxPro MX Hard Tonneau Cover in matte black. You can upgrade your old tonneau cover and not have to worry about any snapping or hook and loop connections. The RetraxPro MX Hard Tonneau Cover is the best way to cover up your truck bed. One of it's great features is, it can be locked anywhere along the rails you please. It's perfect for keeping your gear dry, covering up that fifth wheel head and you can even use it to secure your elongated cargo. The latch itself doubles as a handle. When you're ready to lock it, it sits flush within the cover and you can lock it up with the included keys.
When you've done that you can put the cover over top. The whole thing rolls up into the flush mounted box for a low profile design. It only takes up about 12 inches of space behind your cab. It's a simple clamp on installation and the rails only sit about an 1-1/4" high on top of our truck bed rails. Here on the inside they take up about 1-3/4". The sealed ball bearing rollers within the cover make opening and closing easy.
And because they're sealed, they're maintenance free. The whole thing is made out of an industrial strength aluminum, it's gonna keep out the elements and it can support distributed loads of up to 500 pounds. When used with the locking tailgate, it's furthers your security. The whole thing is UV protected and it features a limited lifetime warranty. It's an easy no drill installation, it simply attaches to your truck bed rails with the provided clamps. And that's going to complete our look at the RetraxPro MX Hard Tonneau Cover.
Ratings & Reviews
My third Retrax. The fit and finish is on point. Nice job... Again!
Easy installation. No problems after a year on my truck. Very satisfied with the purchase.
Only had this cover for a few weeks but it so far.
The RetraxPRO MX Hard Tonneau Cover was very easy to assemble and install. Item was packaged very well for shipping. I would recommend this tonneau cover.
I had some damage. It was a dent in the main box. I went ahead and used it anyway. I didn’t call or ask for return because I needed the cover right away and I messed the box up which would make the return hard to do. This was not etrailers fault. It was a packing issue from Retrax.
Very well built and easy to use, great product.
Vert good quality. No failures despite repeated use.
This cover looks amazing and rolls so smooth. No heavy trifold flipping. I have the 8’ bed and it works great.
Nice product. More difficult to get the rails attached than it should have been. Very glad I had 2 strong guys helping me.
Love the results.
I like the old latch system better.
The wire loom for drains is not going to last long.
Great quality very happy with this. Would recommend to anyone looking for a nice retractable cover.
On my previous truck, we had installed a soft snap-on tonneau cover. While it looked great, its performance over time decreased significantly, particularly in cold weather! So this time around, I decided to splurge and purchase a high-quality roll-top hard cover. I am SO HAPPY that I did! As importantly as its ease of installation and use, it is lockable so I will no longer have sleepless nights while traveling, worrying about the items in the truck bed. eTrailer was a great help in expediting the delivery of this item, as my HOA requires pickup trucks to have their beds covered... Thank You!
Item came on time and was very easy to install, but you need somebody to help you lift and put in the back of the truck as instructed. Its not that heavy, but just too awkward for one person to lift and place.
Easy enough to install and looks good. Works as I’d hoped and just need to see how it holds up in the Midwest winters ??
It’s seems high quality but this review is too soon to tell . I would rather give reviews after a few years of use but for now the product seem exceptional. It was just I stalled today.
The tonneau works well. I wanted something that would be pretty secure (aluminum and locking) and easy to open/close. It is all those things! One handed open/close. Few pieces that are below the cover level so it doesn't interfere too much with what you have in the bed. Install was ok - definitely two people are easier than one.
Two downsides. The roll up area does take bed space - more than I'd like. Also, it is not watertight. Not terrible in the rain, but a good downpour or car wash gets water in the bed.
Quality product. Bought to protect and hide fifth wheel hitch. Does a great job!
This was a really easy installation. 2026 GMC 3500 DRW. I did it the install myself pretty quickly (except for lifting the combined rail/cover into the truck). One person on each side to guide and lift while my daughter lifted the weight in the middle of the bed worked well. The few connection screws required fit easily. Seals at the front of the truck and on the tailgate are smooth and complete. I didn't make both sides parallel when first installed. I loosened the middle and tailgate ends of the rails, adjusted the spacing distances, and it's perfectly in align now. One person can very easily expand and contract the top. The two drain hoses won't fit the holes in the truck bed. I'll pickup something from Home Depot or Lowes to append a reducing method. I really like this bed cover!
Should put actual installation instructions with the product inadition with the on line.Something was catching when attempting to operate. Semes to work ok after it broke free.
The shipment was supposed to be delivered yesterday, so I stayed home from work to receive it. I live on a busy street in St. Louis city, or a corner lot. The instructions were to deliver it around back to the garage door. It finally arrived after 9pm on the front steps, which are within 8 feet of the sidewalk. Good thing it's so heavy and it didn't "walk off".
This is a very sturdy tonneau cover and looks great on our 2026 Ford F-450. The materials and build quality are top-notch. The installation is straightforward, and I recommend you watch the video(s) prior to performing the installation. The unit is heavy, and you will need a strong helper. This is our first hard tonneau cover, and we are very pleased with our purchase.
Received my order in a timely manner. It was an easy install. I’m 65 years old and was able to install by myself.
The instructions were definitely lacking—ended up finding a decent YouTube video. The box itself wouldn’t fit between the rails on the inner sides of the bed (see pics), so I had to use prybars to seat it past the rails.
Functionality: seems very solid once installed and rollers help it slide easily either direction. I’m not convinced it’ll hold much water out, but that’s partly due to the ram box hinges next to the tonneau rails, then not a lot of pressure between the tonneau and the top edge of the tailgate. I also had a $500 tonneau in the past with weather stripping along the front box to scrape debris from the top side of the tonneau as it retracts into the box at the front of the bed. This doesn’t have that, so it seems debris will accumulate inside the box and I’m not sure how easily it will be to clean inside the box.
Time will tell if this is worth the price tag, but it does feel very sturdy once installed.
I was hesitant to try a canister type roll up bed cover after only having hard covers or a soft roll up above bed cover before. I'm glad I did...
It still gets 5 stars because even though the box for the rails was damaged, no parts were missing and there were no dents or scratches on any of the pieces.
The install was easy, did it by myself in a couple of hours not rushing to get it done but working at a leisurely pace. The only time I needed help was to position it in place after the side rails were attached. The part that took the longest was measuring and adjusting the width between rails from the front to the back to get them within spec so the cover moves smoothly and easily with no binding. The instructions were easy to follow and it is simple to put together and install. Just take your time measuring between the rails and it will glide effortlessly.
I like the size of the canister, it doesn't take up much space at the front of the bed, even though it has 8ft to roll up. It seems as if it will be pretty water repellent with the rubber seals and gaskets. It rolls up easily and doesn't retract fast and slam into the canister. It also rolls out easily all the way to the tailgate. Unlike previous covers I have had, this one doesn't require the tailgate to be closed to work properly. The cover can be extended all the way to the tailgate and you can open and close the cover or tailgate independently of one another. I also chose this particular cover because it had the anywhere lock feature rather than only a few set locking points. The matte aluminum is a nice clean look, and it seems like it will be less prone to sagging in the middle as time goes by. This particular model sits just a little above the bed (the bed cover rails sit on top of the truck bed) but the canister isn't any higher than the rails or the cover itself when its open or closed. It looks seamless and clean.
It's only been a few days since install but as of now, I couldn't be happier having chosen this bed cover. And as always, etrailer makes the ordering process easy and worry free with their vehicle specific fit, fast shipping and fair prices.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.