To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
When you need to grab something from the bed fast, the Trifecta 2.0 makes it simple. The soft tri-fold design lets you lift the rear panel with spring-loaded EZ-Lock clamps that pop loose in seconds. Fold the cover forward to free up two-thirds of the bed or remove it completely for full access. When closed, the cover sits 1" to 1-1/2" above the rails for a clean, low-profile look that keeps your gear out of sight and protected.


Many covers require rails, loose clamps, and tools to install. The Trifecta 2.0 skips all that. Its Jaw-Grip and EZ-Lock clamps are built right into the frame, so installation is fast and completely drill-free. The cover mounts using factory rail brackets—no extra hardware or setup required. And when it’s off, there’s nothing left behind on the bed rails for a smooth, uncluttered look.



This cover is built to hold up through years of weather and work. The frame and bows use aircraft-grade aluminum with a black powder coat finish to resist rust and corrosion. Hinges made from fiberglass-reinforced nylon add strength without extra weight, and the heavy-duty leather-grain vinyl skin stays flexible in hot or cold temperatures. It’s permanently attached to the frame, so it won’t flap or loosen while you drive.

Rain or road grime won’t get far with this setup. Snap-on rubber seals run along the edges of the cover to help block out water better than adhesive styles. Once you fold it down and close your tailgate, the clamps lock under the bed rails, keeping the cover firmly sealed and helping secure whatever’s inside until you’re ready to open it again.
At roughly 35 lbs, the Trifecta 2.0 lifts off easily when you need full bed space for bigger hauls. Just release the front Jaw-Grip clamps at the cab, lift, and set it aside—no need for tools or a second person. It’s a quick way to switch between covered protection and open-bed utility without hassle.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Since 1982 Extang has been perfecting the truck bed cover. For over 10 years the Trifecta's been the best selling soft folding truck bed cover in the world. Now we are proud to introduce the all new Trifecta 2.0 like the original the Trifecta 2.0 is incredibly simple to use. To close the cover, unbuckle the straps, fold the cover back, then secure it using Extang's all new EZ Lock Clamps. The tailgate can be opened and closed with the cover in any position. The Trifecta 2.0 keeps prying eyes out.
Locking the tailgate helps ensure that no one will get into your truck bed. The Trifecta 2.0 allows you to maintain ready access to your bed for easy loading and unloading. When properly secured the Trifecta 2.0 can be driven in the open position. For extra large cargo, the whole cover can be removed in seconds. Just release the T-handles on our new Jaw-Grip front clap and lift the cover off. This premium truck bed cover requires no assembly, no drilling and installation is as easy as positioning the cover on your truck and tightening the clap.
You can go from out of the box to on the road in just a few minutes. When closed the Trifecta 2.0 sits low on your truck bed. It's soft curves and sleek design create a smooth contoured, low profile appearance. The heavy duty, leather grained vinyl has been tested to withstand the harshest winter and summer conditions. Drawing on our decades of experience Extang has regarding-engineered the frame, hinges and corners of the Trifecta 2.0 to provide any greater durability and lasting value. The new multi-lipped seals are installed without adhesive and have a crisp, straight appearance that provides the best seal available for incredibly effective protection from the elements.
The frame is the strongest and best looking in the industry, made from lightweight, aircraft-grade aluminum. The frame is painted black to match the vinyl. Extang's all new EZ Lock Clamp features an exclusive spring-action handle that locks the cover to the truck when you release it. Our new Jaw-Grip front clamp grips each side of the bedrail, creating both lateral and downward force, providing a secure installation without damaging your truck. It attaches securely to the truck bed without distorting the bedrail. Extang is committed to quality and stands behind the Trifecta 2.0 with a best in class lifetime warranty.
Trifecta 2.0 premium soft folding truck bed cover is the perfect compliment to your truck. The Extang Trifecta 2.0 is the number one choice in truck bed covers.
Ratings & Reviews

Lazer S.
1/27/2026
Sorry to hear that, Craig. I can't say I have heard of one of these failing so quickly, so I am surprised. That said, the picture you sent is of a hard folding cover and what you ordered is a replacement for a soft folding cover. Is the picture of a different cover? And then also, can I ask who you contacted exactly? I checked your account and your email address, but I could not find anything sent in. Did you use a different email address by chance?

Paul L.
6/17/2020
Very happy with cover, was very easy to install. Keeps everything in bed dry and hidden. Easy to remover for larger loads. Looks great still. All in all was a fantastic experience with product!

Kyle
3/27/2020
Product worked great for the time that I had the truck it was on. The material didnt fade from the sun and it never tore or scratched if something hit it. I definitely would purchase again.

Burnie S.
12/11/2016
It is a good product. I really appreciate the ease to open the cover when you need an open truck bed

Cliff B.
6/7/2019
Still love it, Still working great.

Kate F.
4/9/2026
I am very sorry to hear that install was more difficult than anticipated. A lot of companies do have an install policy, it was on there for more than one day which is why we can't take it back. Once again, my apologies that you are not more pleased with the cover, this is not the typical feedback I get on this product.


Rdw
10/29/2021
still remains in like new condition after another year and another Maine winter.

Mike B.
8/28/2018
One of the best quality tonneau covers I have owned. Still holding up great after a year.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Ken
5/26/2026
its good, still wish the quick releases were on all 4 corners. real pain to reach in for front releases