To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When you need to haul larger gear or tools, you don’t have to remove the cover. The Limited Edition rolls up in seconds and secures neatly behind the cab with premium straps and clips. The design sits 1-1/2" above the bed for a smooth look while still allowing full use of your stake pockets and tie-down points. When rolled down, it reduces drag and can improve gas mileage by up to 10 percent.
Keeping your cargo protected is easy with the AutoLatch II dual locking system. When the cover is closed, both locks automatically engage—one on each side—for solid security. Opening it takes one quick pull of the cord with one hand. The cover works with your existing tailgate lock for a tight, weather-resistant seal that keeps gear safe and out of sight.
The reinforced, UV-blocking vinyl stays flexible down to -40 F and won’t shrink or fade. Between the Element weather seal at the cab, the reinforced vinyl flap at the tailgate, and the TrailSeal gasket that runs along the sides and bottom of the tailgate, rain, dust, and snow stay out. The black powder-coated aluminum rails and bows resist rust and support the cover in heavy weather.
Fine-tuning the fit is easy with the XT-Dial tension adjuster—just twist the dial to tighten or loosen the cover, no tools needed. Inside the bed, the included EZ Retriever II pole lets you grab items without climbing in. The integrated tie-down rings on the clamps add more ways to secure cargo exactly where you want it.
A built-in, battery-powered LED light strip brightens up the bed so you can see what you’re doing at night or in low light. The flexible 18" strip uses 3 AA batteries (not included) and features 30 bright white LEDs with automatic shut-off options. It mounts with peel-and-stick simplicity and stays ready whenever you need it.
Alternate Instructions
Ratings & Reviews
Still works and looks great after one year! Very pleased with our tonneau as it has met all of our expectations during our full time RV travels.
The cover was easy to install. One of the clamps was slightly bent from shipping or mfr damage, but still managed to clamp effectively. Overall, great look and easy install.
I've had this tonneau cover for over a year now and it looks and functions like new. Highly recommend this tonneau.
Packaged for shipment with attention to details like making sure the cover was wraped well fro transit. Fit the truck like a glove, Looks great on the truck. Instructions were clear and easy to understand.
Unfortunately I a unable to give an accurate review of the cover due to a vehicle fire shortly after installation. The time I had the cover it worked well except the side clamps would loosen.
This product had to be direct shipped from the manufacturer. I was worried it wouldn't arrive on time prior to my trip. No worries needed. Came in well before I expected it. This cover fits better than other covers I had on past trucks. Etrailer comes through again. I have never had an issue with any of my orders from Etrailer for the last 15 years.
It was relatively easy to install. Quality looks good!
This is my second Access cover and love them. After 6 years the first one needed new velcro and got excellent customer service. This cover came with a very sturdy hook to retrieve stuff that slides forward in the truck bed. I have found this is handy for all kinds of things. Wouldn't wan't to be without it.
These tops roll up very easy when needed and keep everything clean and dry when rolled out. Most versatile top for me.
The tonneau by Access is great as usual with good fit and quality. The tonneau is capable of handling high tension which helps prevent pooling. There is barely any rain water standing. The effect is almost like a solid surface. Caution on the ladder racks you pair them with though as the rack may prevent the tonneau from gaining maximum tension wich will cause more pooling than desired. I paired the with the recommended TracRac for the sliding adjustable rails. They do fit however the bulky base rail of the TracRac is too close to the sides of the tonneau and prevents my fingers from getting in there to pull the tonneau tight on the velcro sides. It's doable but very time consuming and not ideal if you open and close the tonneau frequently. I would propose that Access make some design tweaks to resolve this and better complement the TracRac base rails since it is one of the few racks that have a high load capacity. Other than that the tonneau cover is the best quality I have used for a roll up. Still have the same one on my 03 Dakota since 2008.
Nice fit ,easy to install
This cover is everything I expected and then some. It was easy to install and adjust. It's a solid cover with built in support bars that keeps the cover tight. it keeps my contents dry yet rolls up when I need the entire bed and the best part is I can still see out the back window (unlike some of the tri-folds). Highly recommended.
Thoroughly impressed with this cover after 1 year. Keeps bed dry, performs great going down the road too. The light and grab bar are a great bonus. Looks great still, no fading. Get compliments on it all the time since you don’t ever see them on OBS step-side trucks. Highly recommend etrailer for this product.
Am very happy with this year old tonneau cover from etrailer.it is so versatile and with gas prices as they are will get better mpg closing tha bed off,by 3-4 mpg I've done the math,before and after.was getting 17mpg now 20mpg.but love it,I maintained it once a month.also was looking everywhere for a tonneau cover for a stepside,and etrailer hooked me up,and etrailer will hook you up to peole.
The cover went on fairly easily, despite the instructions being a little unclear. I definitely like the LED light bar.
Easy to install solid item. We are experiencing issues w one end cap on the latch bar falling off occasionally
My Access Limited Edition soft roll-up tonneau cover arrived safely and on time to my freight forwarder in Miami. The packaging looks excellent and well-protected. I haven’t opened it yet, but I’m confident it will fit perfectly on my 1998 Toyota Tacoma.
Thanks to etrailer for the smooth process and reliable shipping — great experience so far!
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.