Blue Ox EZ Light Custom Plug-In Tow Bar Wiring Kit
This item does not fit your vehicle
2004 Ford Excursion
These items fit your vehicle
2004 Ford Excursion
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Easily plug this custom harness into your towed car to get the turn and brake signals you need for flat towing. Unlike other kits out there, this harness protects your vehicle from electrical feedback without you needing to splice in extra diodes.
When you're towing a car behind your motorhome, you'll need a way to get the tail, brake, and turn signals from your RV to the car to be safe and legal. This kit plugs into factory ports on your vehicle so your car can display the electrical signals coming from your motorhome. That way everyone on the road knows what your rig is up to as you tow.
This is a completely plug-and-play option for your vehicle, so the installation of this kit will be quick and easy.
While this kit has everything you need to get your towed car wired and ready, you'll still need some gear to get moving. To connect to your RV's electrical, you'll need an umbilical, and you'll need to make sure the plugs on that cord match the ones on your RV as well as the 4-way that's now on your car. If your RV has a 7-way, C57271 is a great option.
Something else to think about is whether or not you need a brake light relay. If your car's brake lights illuminate when the engine is off, you'll need to install a relay (RM-88400 - sold separately) to make sure the brake signal overrides the turn signal sent by your RV when you're slowing down to turn while towing.
And of course, there are a ton of other parts and accessories that will make towing your vehicle easy. Feel free to shop around our site or drop us a line if you have any questions. And once you get all set up, don't forget to send us a review full of pictures so we can see your rig out on the open road!
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello, everybody. This is Jeff at etrailer.com. Today, we're going to take a look at this Blue Ox Tow Bar Wiring Kit. Now this is a custom fit part. It is designed to fit the 2005 to 2010 Chevrolet Cobalt, Cobalt Sport, and the Cobalt SS. Also fits the 2006 to 2011 Chevrolet HHR and the HHR Sport and the 2007 to 2010 Pontiac G5.Now on a custom fit part like this, I do like to recommend for you to go to our website, use the fit guide, put in your year, model vehicle, and it'll show you if this will work for your application.This tow bar wiring kit will connect to your tow vehicle's wiring to provide taillights, turn signals, and brake lights while towing.
It includes all the necessary components and detailed instructions. Comes with the nice dust cover here for your four way. So when you're not using your four way, you can put your dust cover on there to protect the terminals.It comes with the mounting bracket that you can install to hold the four way into place. Basically, just opens up and then you can lay that in there. Then it'll close.
Just go ahead and take the cap off. There we go. Lays right in there. The cap comes out that way, and then you just close it around there. Mount that to your vehicle.
Comes with the hardware to install that. Comes with a grounding screw. There is a white wire that needs to be grounded. If you have a ground, you can already connect it. If not, they do include a grounding screw to make your own ground.
Some cable ties to take up any slack in the wiring, and even a little package of dielectric grease to put on all your electrical connections.Now there is no cutting or splicing required. It plugs into the factory connections on your vehicle. Basically, you just go behind your taillights, unplug your harness, and then plug these connectors in. This one on the driver's side, this one on the passenger side, and then run this length of wire out the back. Again, make the good clean ground. Then you have your four way all ready to go. These parts are made in the USA.But that should do it for the review on the Blue Ox Tow Bar Wiring Kit.
I am expecting the product to work as expected. The shipping box was partially open on receipt. My installation will be this week and I am hoping we are not missing any parts.
Easy installation. We have towed our jeep almost 10,000 miles this year with zero problems
Easy to order, quick to receive
Do you have a question about this Flat Tow Wiring Harnes?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Scott
11/8/2024
Installed this myself and have zero problems in over 10,000 miles towing