To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
ActionTrac motorized running boards automatically deploy a second step as your vehicle's doors open and retract when the doors close. Integrated LED lights for added visibility and safety. Custom fit mounting kit sold separately.
Features:
Specs:
Customer Satisfaction Score:
74% were satisfied with this product
26% of customers were not satisfied
Ratings & Reviews
Product looks great and works well.
Running Boards are exactly as advertised. Simple to install as long as you follow the instructions.
These retractable running boards are "Almost" "Plug&Play" on Fords. First, I recommend Ford Upfitter Switches to power On/Off the boards (no drilling thru the truck firewall). Second, I found that I needed to Re-route/Re-group the wires thru the floor paneling...some wires needed to be on the Passenger side. Third, it would be nice if the RBoards did not have a low current draw on the battery when parked long term.
I would buy them again and do strongly recommend these RBoards. It is presently the best available choice on the market. I installed these boards myself in about 6-8Hrs.
Love them. Only issue I have had with them is both side lights blink instead of being solid.
Works great. Install wasnt too bad. If your handy its worth it.
I was disappointed that there was no wording or switches with this product that was an additional cost had I known I wouldn’t have bought them
I love the steps. Did a self installation and it was not too bad, just time consuming. I wish it came with more split loom and of bigger diameter. I bought 1 in. split loom as I feel the wiring was too exposed under the vehicle. Silly thing, the sensors were the most painstaking task, as mine were simply not lining up right. Thank you.
Fast shipping! I ordered a set of steps for an unknown vehicle and did not notice until I attempted to print installation instructions. I called etrailer and talked to Ashley who sent an email with return instructions as well as sending the correct set of steps to me. Fantastic customer service which is hard to find these days. Thanks Ashley!!!
Steve with TekRV, a mobile RV mechanic, out of Galveston did the installation. Everything went according to the instructions. Looks and works great. Co-pilot is happy, I am estatic.
Customer service was great. Received my running boards and in transit they had a minor dent on the top.Amy who was helping me , didn't think twice and sent me a whole new set in two days , which was great. The new set that I received were in perfect shape.
First time for the power running boards. Wasn’t to hard to put on. Now that I did it once I’ll be able to cut down the time in half. Wife loves the fact that it has a two step to get into the truck. Especially with bad knees. A+ for us
My wife can now get into my Chevy 2500HD without a step stool!
I bought them for my dad so he can get in and out easily. I like the on off switch because I don't use them unless he's riding with me.
Install was no joke. Hard part is the wiring. Had to remove the rear interior and pillar panels to install harness and four door switches. Has to be a better way, like tapping into the door light switch wire to trigger the steps!
Steps are nice, I like how there are two steps compared to the other guys power step. Lot easier on the seat bolsters getting out instead of sliding out to a lower step.
I liked the idea of a two step running board. My wife has had operations
on her knees and was difficult for her to get into her jeep with the
standard side steps. I started looking for powered steps and these
sounded like just the ticket. There was some fabrication involved,
because I installed them on a 2000 TJ Wrangler, but nothing too crazy. I
used some 3/16" flat bar and sandwiched it between the body mounts. In
retrospect, I should have used C channel for the longer front mount,
because I had to weld gussets on it. Welded a piece of angle to the
flat bar for the supplied mounts. If you don't have a welder, it could
all be bolted in with the C channel.
I also didn't care for the supplied magnets and switches held on with
tape to operate the steps. We hit up the u-pull-it wrecking yard and got
the same style switch that operates the dome lights and I installed them
above the original switches.
I put the door delete bypass in the housing for the front speakers on
the dash.
They have been installed for about two months now and we've had no
problems with the operation. Lots of likes from our friends who see them
in operation.
My wife has had hip and knee replacement and we had to carry a step for her to get into our Chevy 2500HD. With these running boards the step extends low enough she can get in and out on her own, well worth the install.
All brackets has areas that didn’t get coating and rust was starting to form. Primed with cold-galv paint then followed up with satin black.
Instructions were not in color as stated, black and white photos hard to make out. Had to cross reference on the web in addition to the instructions to install.
The running boards … one opens and closes louder then the other which is startling at first but very pleased, works as advertised, looks good.
They are very sturdy and install is not too hard. The wiring harness is top notch and includes everything you need. They fold up and look like a plain step bar until you open the door then the bottom step swings down and makes accessing my Ram 5500 much easier! I know the application says it won’t fit a 4500 or a 5500 but I assure you they fit any Ram 2500-5500. No cutting into the factory wiring harness, all the steps need are +12 volts from the battery and a ground screw.
It's a Christmas gift impressed product and quick delivery
Perfect fit and super easy to install.
Only received these because the set I ordered never came in. etrailer had these in stock and shipped them out promptly when they realized the mfg had not shipped. Kudos to etrailer for the great service.
This is a custom install. Choosing the proper running board was easy, received order promptly.
Do you have a question about this Nerf Bars - Running Board?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Victoria H.
11/7/2024
Hi Roland, I see your experience with the running boards was not a good one. If you would like to let me know what happened, I would be happy to help.