Video Transcript for Ultimate Overview of the Aluminum Viking Series Valhalla Trailer Wheel

Hello, everybody. This is Jeff at etrailer.com. Today we're gonna take a look at this 15 inch by 6 inch Viking Series Valhalla Black with machine spoke aluminum trailer wheel with the center cap, and the wheel has a six on five and a half inch bolt pattern. Now this aluminum wheel is very durable, lightweight and rustproof. And this one here is the Viking Series Valhalla design. You can see it's a six spoke design, has a black finish to it.

And then if you notice the face of the spokes themselves have a machine finish to them, provides a nice, bold, sleek look. Now the front and the back of the wheel have a nice, glossy, clear coating on them to protect it. Give you a few specs on this, we're gonna start with the dimension or the diameter on the wheel. The diameter always be measured inside to inside when you measure the wheel. So on this one, if we take our tape measure.

And if we go inside to inside, you'll be able to see 15 inch diameter. The width on the wheel, we measure the same way, inside to inside or bead seat to bead seat. Measure six inch wide measurement. And we mentioned the bolt pattern on this is a six on five and a half inch bolt pattern. And if you wanna measure that on a wheel that's an even number of lugs, it's pretty easy because the lug holes are directly across from each other, so all you have to do is get a ruler and measure from, pick any hole, let's say this one, measure from the center of this hole directly across to the center of the hole right across from it.

So on this it'll measure five and a half inches. So that's a six lug five and a half inch bolt pattern. This does use a wheel lug size of half inch by 20. The weight capacity on this wheel is 2,830 pounds. And the pilot hole diameter, which is the large hole here in the center of the wheel, goes over the hub on your trailer.

Diameter of that opening is 4.25 inches. And that's also where your center cap will install through. When you go to install this, before you put this on the trailer, you'll slide your center cap right through there into place. And just like that, you have your center cap in there. Now this does you steel inserts in the lug nut wells where your lug nuts go. This will help keep your wheels securely in place on your trailer hub. The steel inserts help prevent the holes from wearing down or elongating, eliminates the need for constant retightening of your lug nuts. Center cap we mentioned it is a nice, chrome center cap, and you can see it just installs from the rear. And what's nice is this center cap portion, once it's installed like that, you can actually pop off just the outer portion to gain access to your hub if need be. And also the valve stem, you can see, is included in the wheel. This wheel will meet the J1204 Standards. But that should do it for the review on the 15 inch by six inch Viking Series Valhalla Black with machine spoke aluminum trailer wheel with the center cap, and it has a six on five and a half inch bolt pattern.