Replace a worn or damaged wheel on your utility or cargo trailer with a strong, lightweight aluminum option that delivers reliable load support and a clean, finished look.
When you're hauling serious weight, you want a wheel that can take it. This aluminum wheel is rated at 3,200 lbs and meets DOT specifications, so you get the peace of mind that it's built for real-world loads. Whether you're towing long distances or running fully packed, the strength and precision engineering keep it solid mile after mile.
Corrosion isn't an issue here. The aluminum build is naturally rustproof, and both the front and back are clear coated for extra protection. That means it stays looking clean and sharp even after heavy use in wet or humid conditions. It's a wheel designed to look good and stay that way.
This 16" x 6" rim hits the sweet spot between strength and reduced weight. The aluminum design cuts down on unnecessary mass without giving up durability. Its 6 on 5-1/2" bolt pattern and 4.25" pilot diameter make for a strong, balanced setup that fits precisely and performs reliably.
The Sendel Series T03 wheel brings a clean five-spoke look finished in silver that instantly modernizes any trailer setup. The machined surfaces catch the light just right, giving it a refined but tough appearance that stands out without being flashy. It's an easy way to give your setup a fresh, finished look while keeping all the function intact.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer. Today we're gonna take a look at the Sendel 16 inch by six inch series TO3 silver machined aluminum trailer wheel with the six on five and a half inch bolt pattern. Now this is an aluminum wheel, very durable, lightweight, and rustproof. As we mentioned, it's the Sendel Series T03, which as you can see is a split five spoke design, has a nice silver finish and then they do a machine finish on the face of the spokes and even on the outer lip to give a nice shine to the wheel. The front and even the back of the wheel are clear coated for protection. It is a high quality wheel.
It does meet the DOT, Department of Transportation, specifications and the SAEJ 1204 standards. If you notice, the center cap is not included. If you do want a center cap, we do sell those separately on our website. You do wanna make sure to get a center cap that has the same diameter as this pilot hole here 'cause when you do install the center cap, it'll insert through this hole. Pilot hole diameter on this wheel is 4.25 inches.
Few measurements on this wheel, the diameter on the wheel is 16 inches. And when you measure the diameter on the wheel, it's always measured inside to inside, or bead seat to bead seat. So you can see if we take our tape measure and if we go all the way across, there's your 16 inch diameter. The width will be the same way. It's measured bead seat to bead seat, or inside to inside.
There's your six inch width. And the bolt pattern on this wheel is a six on five and a half inch bolt pattern. And if you wanna measure that on a wheel like this, that's an even number of lugs, it's pretty simple because if you notice the lug holes are all directly across from each other. So you just have to pick any one hole, let's say this one. Measure directly across to the hole right across from it, center to center.
On this, it'll measure five and a half inches. So that's telling you it's a six on five and a half inch bolt pattern. Does use a wheel lug size of a half inch by 20, and the weight capacity on this wheel is 3,200 pounds. Now if you do have any other additional questions regarding this part or any item we carry, please feel free to reach out to us so we can help you get all of your questions answered for you. But that is gonna do it for a look at the Sendel 16 inch by six inch series TO3 silver machine aluminum trailer wheel with the six on five and a half inch bolt pattern.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.