When you’re towing heavy gear or equipment, you need a setup that won’t flinch under load. The Kenda Karrier KR53 ST235/80R16 tire is a Load Range E radial rated for 3,520 lbs at 85 psi. Reinforced construction and proper inflation let you carry real weight with stability and confidence mile after mile.
No waiting, no mounting shop needed. This tire-and-wheel combo arrives pre-mounted on a 16" galvanized spoke steel wheel and aired up so you can bolt it on and get moving. It’s the quickest way to replace worn setups or outfit a fresh build without extra steps or costs.
Long trips and high speeds are where this assembly shines. The radial design helps reduce heat buildup for cooler running and even wear, while the KR53 tread provides stable tracking and road grip. With a speed rating N (87 mph), it’s built to handle extended hauls without breaking a sweat.
Moisture, salt, and weather can eat ordinary wheels alive, but this galvanized spoke design keeps corrosion in check. The coating protects the steel from rust so it stays strong through wet launches, salted roads, and year-round use.
The heavy-duty wheel measures 16" x 6" with a 6 on 5-1/2 bolt pattern, a 4.27" pilot diameter, and a wheel capacity of 3,050 lbs. The matching 1/2"-20 bolt size makes installation straightforward, ensuring a secure fit for high-capacity setups built to work hard.
If the tire fails under normal use in the first year, Kenda will replace it.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. Let's take a quick look together at this Kenda Karrier KR53 ST235/80R16 Radial Trailer Tire with this 16-inch galvanized spoked steel wheel. Now, this radial trailer tire does come pre-mounted on this 16-inch galvanized spoked steel wheel with a six on 5 1/2-inch bolt pattern. So, whether you're replacing a worn out setup or you're prepping for a new trailer, you're definitely gonna save time and be able to skip the hassle of separate mounting and inflation. The KR53 tread is optimized for road control and trailer stability. The low-rolling resistance is going to help maintain fuel efficiency and steady tracking on long-distance hauls.
As you know, the radial construction of this tire is gonna help reduce heat buildup, and it's going to promote longer tread life, especially on extended trips. Now, as I said at the beginning of our time together, and as we have stamped here on our tire, this is an ST235/80R16 tire. This is a Load Range E tire, meaning it has a 10-ply rating. The maximum load capacity is 3,520 pounds at 85 PSI, and this tire has a speed rating of N, indicating a maximum speed of 87 miles per hour. This included galvanized spoked wheel is going to resist rust and corrosion, making it ideal for marine environments, salted roads, and year-round utility use.
The measurements of our wheel, looking at the diameter first. Measuring bead seat to bead seat is 16 inches. The width is going to be six inches. And our bolt pattern, as I mentioned, is six on 5 1/2 inches. And in case you don't know, the first number in the bolt pattern is the number of bolt holes, but the second number is the diameter in inches of the circle on which the bolt holes sit.
So, to determine the bolt circle diameter on wheels with an even number of bolt holes, you simply measure from the center of one bolt hole to the center of the bolt hole directly across from it. The wheel stud size is a 1/2 an inch by 20. The capacity of our wheel is 3,050 pounds. This does not include a center cap, but if you decide to pick one up, you just wanna make sure that it fits the pilot diameter of 4.27 inches. Now, if you happen to have any other additional questions about this assembly or anything else that we carry, don't hesitate to reach back out to us, whether by phone, email, or chat.
We do wanna be sure that you're getting exactly what you want and need. Well, I think that's gonna wrap up our look today. I do hope that it was helpful for you. Again, my name is Andy, thank you for joining me.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.