Video Transcript for Review of Terran Axle Trailer Suspension Parts - Hangers - Suspension Kits - TX35VJ

Hi, everyone. Steve here with etrailer.com. Let's take a look at our Terran Axle single-axle hangar kit for double eye springs. It's gonna feature a 3 1/4 inch tall front hangar and a rear hangar 1 1/4 inch tall. Now folks, these again are for double eye springs. You can mount 1 3/4 inch wide spring to a single-axle trailer frame.

These do support multiple weights between 2 and 7,000 pound trailer axles. And you're gonna get the full kit you see here, the six shackle bolts and nuts, the four shackle straps, the two front and rear hangers. And these are weld-on installations, so you will require welding to the frame to install these. So, if you're not sure if that's something you wanna tackle, you can use our dealer locator tab on the homepage at etrailer.com and we can help assist you finding someone local to you that can do it for you. Now, the bolts are three inch long and that's from the bottom of the head out to the tip, and the shackle strap center to center on the holes is 2 5/8 inches.

And the shackle nuts and the bolt is a 9/16 inch diameter nut. Now, we mentioned the height. You're gonna measure from the top plane here down to the center of the hole. That's that 3 1/4 inch tall and on the other hanger, from the center of the hole to the top plane, 1 1/4 quarter inch. Folks, that should do it for our quick look together.

I'm Steven. Thanks for watching.