Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Perfect for Class A motorhomes with HWH and Valid leveling systems, these sturdy rubber pads install on your jacks, eliminating the need to crawl under your rig during leveling. Large surface area provides added stability on soft ground.
Features:
Specs:
Check the listings below for some of the most common rigs that are compatible with this system. Note: You will need to measure your jacks to confirm compatibility, as the foot size/shape of the jacks on your leveling system can vary from model to model and year to year.
SnapPads install quickly and easily, and never need to be removed. Install each pad one at a time. Begin by placing the pad beneath your jack, ensuring that the pad and foot are properly aligned.
Lower the jack until the lip of the pad fully engages around its foot and locks into place. You'll hear a snapping sound once the pad is securely installed. Repeat this process for the remaining pads. Installation is permanent, so once you have the SnapPads secured, you'll never have to worry about crawling under your RV to place pads again.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody, Andy here with etrailer.com. And today, we're gonna take a look at these SnapPad HiWay 10 Bus jack pads. Now, these four heavy-duty rubber pads are going to snap onto your Class A motorhomes with HWH or valid leveling systems with two 10-inch in diameter and two 11.5-inch in diameter jack feet to make leveling faster and easier, eliminating the need to crawl under your motorhome to position plastic pads or wood blocks. Now, it is recommended to measure your jacks to confirm compatibility as the foot size or shape of the jacks on your leveling system can vary from model to model and year to year. Now, let me go ahead and give you some overall measurements of these pads. And so this pad is going to be for your 11.5-inch foot.
So I'm gonna go ahead and measure the diameter. So lemme see if I can line up my tape measure here real quick for you. So looking at the diameter of this bigger pad, as you can see, we are sitting right at 13 3/4 inches in diameter. And then laying this down, let me pull up my ruler here and give you the height. Well, you're sitting right at 2 1/4 inches tall.
And then looking at this pad for your 10-inch foot, lining this up to check the diameter. As you can see, we're sitting right at 11 and, I'm right at about 11 3/4 inches in diameter. And then the height, we're sitting right at two inches tall. Now, as you know, the increased surface area of your leveling jack's feet is going to give you added support for your motorhome, preventing sinking into soft ground, unlike smaller metal feet. Now, these pads are made here in the USA of durable, heavy-duty rubber that are actually made from recycled tires and they're going to grip uneven terrain and prevent your metal feet from rusting or vending.
The built-in drains are going to release moisture to prevent your jack feet from corroding, and they're also going to really serve as a cushion so your metal feet won't crack or chip away at your driveway and they're going to help dampen vibration from inside your motorhome that could cause shifting. Now, there's not going to be any need to remove and replace these pads or carry other jack pads or blocks around with you. These are going to be a simple one-time installation. You're just going to line up the pads beneath your jack feet and lower each foot until the lip of the pad fully engages and locks into place. You'll actually hear a snapping sound once the pad, is securely installed.
Now, installation is permanent, so once you have the SnapPad secured, you'll never have to worry about crawling under your RV to place pads again. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
Ratings & Reviews
Great product!
Great service !!!
They work like a charm!
These pads have worked as advertised.
Well worth the money.Easy ordering, they found a mistake in my order and called me to correct it.
Front Snap Pads fir fine om 2023 Tiffin Zephyr.
The rear 11.5" Snap Pads will require trimming due to obstructions. Will send photos after trimming/installing the rear pads. Which will occur after the heat index drops below 95.
I had ordered this set of 4 but because of UPS losing 2 of the units and tried to cover it up by trying to retape it back up I notified Etrailer right away and their customer service took care of it right away.
Thank you so much for taking care of this issue. Great company and always have what I need.
I can’t wait to put these on my rv this weekend.
Lori Wise
Great company - Great Service! I have ordered many items from etrailer and they always exceed expectations. This order had a faulty 10” jack pad, which they promptly replaced.
First Etrailer is the best place to buy stuff for your vehicle. I have a class a and jeep toad. Etrailer set me up with a blue ox and air force one and was there for support with the install. Our latest purchase was snap pads. Product arrived on time and at a great price. The people at etrailer are the best in customer service
This is the second Motorhome we've installed SnapPads on. We have a 40ft motorhome and before we installed the SnapPads the stabilizers would leave indentations in my hottop driveway during the heat of the summer. After installing the SnapPads, that problem went away. Very easy to install. I did it myself and it took about 30 minutes. with two people it will go even faster. I highly recommend these pads.
So easy to deal with etrailer and customer service follow up makes the deal even sweeter. Friend recommended snap pads but we put off ordering since no park has ever asked us to put down blocks or pads. That changed and then we were told by our mechanic that the snap pads were easier on out coach as well. Went on in 20 minutes.
They work awesome, but did have to take some time (couple hours min.) in tediously cutting and fitting of the rubber for the back jacks since our back jacks are octagon shape like the pads. So both being octagon shape, wouldn't allow the pad to just slip on even with dishsoap. However, the front pads slipped on easily since our front jacks are ciruclar shape.
We connected them today and then retracted to make sure they stayed on. So far, so good, but we have not taken it on the road yet. Right now, they look good and function how we had hoped. Sales agent was great and followed up to make sure we received the product.
The pads work well. I lost one because a Hydraulic jack leaked oil on it. I assume that was the cause of it coming off. I purchased a replacement. I like not having to carry boards to put under the jacks or crawl under the coach place them.
Steve
5/17/2024
Good. We just got back from Entegra homecoming. Lots of vendors there. Wish you would have been one of them.
Chris R.
5/23/2024
Okay for measurements, but not install. Should show installing them and other videos say to add dish detergent for ease of installation.
Great price! Delivered on time. Great customer care will definitely be back for more great items.
Kelly
4/11/2026
Very well,as I would expect from the other comments before my purchase. I would recommend the Snappads to anyone that are wanting to purchase.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Tami
6/9/2025
Absolutely perfect so far...very glad we got them.