9" Wide x 32" long x 14" tall. This sturdy steel fender is excellent for your Master Craft boat trailer. Rounded fender has a flat back to mount flush with your trailer. Easily bolt onto your trailer.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer. Let's take a quick look at this replacement single-axle trailer fender for your MasterCraft boat trailers. This steel fender is gonna be a perfect fit for your single-axle MasterCraft boat trailer. Built from sturdy steel, it is designed to cover one tire and protect your boat and other vehicles from road debris, and let me go ahead and retrieve my tape measure here and give you some measurements. So looking at the overall height, which I do have this sitting up a little bit higher than my table so I can give it a turn, so trying to give you that measurement as best as I can with the way that I have it set up.
The overall height is pretty close to 14 inches tall, and then the overall length from end to end, holding that still, making sure I got enough length there, we're gonna be sitting right at 32 inches long. I know that's kind of shaky there, but hopefully you can see that. 32 inches long end-to-end, and then the overall width right at 9 inches. So this fender does feature this flat back and mounting flange as you can see there. So it's gonna sit flush against your trailer, giving you a clean, secure fit.
It's a close fit that also helps prevent like dirt buildup between the fender and the trailer. While we have on the other side here this 1-inch rounded outer edge, it's going to add a finished look. You're gonna be able to easily get this bolted on. It is ready for primer and paint. That's where you're gonna get that corrosion resistance, so, as you know, as soon as you get this installed, make sure you prime it and paint it to match your trailer, and not only will it look great, but you won't have to worry about this rusting out or getting corroded.
Now this does weigh roughly eight pounds, the fender's strong, it's practical. (solid metallic banging) Again, it's gonna be easy to install. As you see, we do have mounting holes here that are going to accept mounting brackets. That's something you're gonna have to pick up separately, the brackets and the hardware. You're just going to be getting the fender.
If you have any other questions, whether it's about this fender or anything else that we carry, don't hesitate to reach out. We wanna make sure that you're getting exactly what you need. Well, again, my name is Andy. Thank you for joining me.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.