To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Most hard covers make you choose between protection and cargo space, but this one doesn’t. The TruXedo Sentry CT rolls up in seconds thanks to its 3/4" thick aluminum slats wrapped in premium 5-layer polyester and vinyl fabric. You can pull either release cable at the tailgate, roll it tight, and secure it with the built-in safety straps at the cab. It stores compactly without blocking your rear window or third brake light and can even be removed entirely—no tools needed.
Some covers fade or crack after just one season, but the Sentry CT holds up through everything from freezing winters to desert sun. The top layer is a woven polyester and vinyl fabric tested to handle temperatures from -40°F to 120°F. It resists UV rays, dirt, and harsh weather so your cargo stays shielded and the cover keeps its clean matte finish. The blacked-out look of the fabric and aluminum slats keeps it stylish while staying tough enough for daily use.
A bulky cover can throw off your truck’s lines and add drag. This one sits just 1/2" above the bed rails on 15-degree angled, self-leveling rails for a flush, low-profile appearance. That shape isn’t just for looks—it helps cut wind noise and drag while leaving your stake pockets open for tie-downs or other accessories.
Keeping gear safe shouldn’t mean wrestling with complicated locks. The slam latches at the tailgate lock automatically when you press down the cover, and the mid-bed security latches engage at the same time. With the tailgate closed and locked, the cover turns the whole bed into a secure trunk. The hard aluminum slats add another layer of protection against prying hands or falling objects.
Installing the Sentry CT is straightforward. The rails clamp inside the bed with a no-drill setup that keeps stake pockets free. Built-in lips on the rails automatically square them as you tighten the clamps, so the cover rolls smoothly every time. With a 400-lb evenly distributed weight capacity and a 5-year warranty, this hybrid tonneau brings durable protection and everyday practicality together in one clean package.
Ratings & Reviews
Installing was easy and instructions were very helpful. Product looks great! And more secure than the other products offered by Truxedo
Loving this cover. It's super-simple to use - just roll it closed and run your hand down the sides to press the hook & loop fasteners down. I wanted a retractable cover, but didn't want the big box taking up space in the bed of my truck. This cover is easily-removed so I have the full bed available for use. The only downside I've found is that it can't be left in any partially-open positions (like my old retractable could).
Installation was pretty straight forward, around 30-45 minutes total. Once installed, the look of the cover is fantastic. Very low profile and the matte black finish on the cover material looks great.
There was a factory quality defect with the installation of the side latches that run up both sides of the cover. Each latch has a cable that connects from the cover to the side latch. As the cover is rolled up, tension gets applied to that cable and it releases the latch allowing you to seamlessly roll-up the cover. On my cover, two of the cables were too loose and would never get enough tension to release the side latches. I could only roll-up the cover about two feet before it would stick. The cables are not adjustable so you cannot fix this issue without new parts.
I contacted Truxedo and they sent out a repair kit for the side latches. I was able to install the new cables and the cover functioned as it should. It was a total of 24 days from the time of ordering my cover until it was fully functional.
I am happy with the look of the cover. I have not had a chance to see how weather tight it is. Hopefully the issue with the side latches is a one-off defect and not representative of the overall quality of this product. I have made several purchases from etrailer and this is the only hiccup I have ever had.
shipping was very fast as ususal, it arrived and the box had damage but a close inspection verified no issues with product. installed by myself a little akward but do-able after reading the instructions and watching the install video it took about 45 minutes to install. There were some fitment issues as the tonneau cover would not stay closed and the tailgate was very hard to open so I shimmed the back corners of the rails with large washers just inside by the tailgate 2 on the right side 1 on the left, I also had to move the rails back about 1/4 inch to ease the opening of the tailgate. So all installation issues are resolved but only 4 stars because the locking mechanism is less than robust. I got the material finish instead of the vinyl it looks very nice. It has rained several time since installed and it keeps most of the water out, what water there was came in by the tailgate I installed this on a 2015 F350 with 8 foot box, it is much easier to open and close than a bak hard folding top.
Originally ordered a Bakflip G2 from another retailer which had huge gaps, barely latched and I could stick my hand in and open when the tailgate was closed. After finally getting a return authorization I ended up ordering the Sentry CT and it was an easy install and perfect fit for my 2017 Ram 1500 w/ Rambox.
I really like the design of this tonneau cover. The roll-up design allows me to see out my back window when hauling items higher than the truck bed. Also, it was able to keep my truck bed dry during a significant rainstorm. I would suggest holding the tonneau by the fabric on the sides when rolling closed opposed to placing your hand on the ribbing to reduce the chances of pinching your fingers.
I have been on a couple of trips where I've needed to open and close the cover repeatedly. It seems to be quite durable and the locking mechanisms work as designed.
Installation was a little more difficult than anticipated since my drop-in bedliner reduced the width of the truck bed between the side-rails at the front of the truck bed where the tonneau attaches. After finding a wider area between the bed-rails, I was able to wedge the the top of the tonneau into the side-rails and push the tonneau through the side-rail track towards the front of the truck bed. It allowed we to wedge the bedliner wider increasing the width between the side rails. I was able to install this by myself in about 90 minutes even with the complications.
This is the PERFECT cover!
The product arrived in a damaged box and had damaged rails. I reached out right when I opened the box, spoke to a rep and submitted pictures., I received no confirmation that the pictures were received, or that replacement parts are processing and, on the way, this is still an open issue.
Been a year since I installed this cover on my ‘22 Ram 2500, it has been great! No issues whatsoever so ever, very happy with my purchase still!
Great product,
This tonneau cover was easy to install and is plenty rugged to hold up to a 24" wet snow load. It rolls up easily. I was hoping it would improve my fuel economy, and I suppose it has about 1/2 to 1 mile/gallon when I go on long trips at highway speeds. About the only complaint I have is that it is not fully waterproof and small amounts of wat water leakes in along the bed rails. Nothing major though.
The cover is great and looks good too. It’s very easy to install and hit low to the bed rails of the truck. The interlocking aluminum strips make the cover heavier. But the fact that the lock together and the is locking mechanism in a couple places along the rail add to the security of the cover. There are two quick releases at the end by the cab allowing me the ability to remove and install the cover quickly. Clicking the rear end in place is quick and easy.
I love my truck bed cover! I was a little hesitant to buy something online but the reviews were good and the description was exactly what I wanted so I took the chance. Everything went well. The directions for installation were explicit and easy to follow. Everything lined up perfectly and operated as expected, especially the waterproof part as only a few drops of water have ever made it inside the bed and only in extreme downpours with excessive wind. It has been a year and the only thing I wish I had done differently was get it earlier! I bought it before a trip and ended up installing it in freezing temperatures . . .
Truxedo and E-trailer got my tonneau cover out and delivered in 7 days. I installed the cover as soon as I received it. Installation was very easy with pretty clear instructions. Just looking at the cover it seems to be of good quality. I have yet to drive my truck so I can't say how it actually preforms in different weather conditions. From what I see I doubt it is totally water proof. I can see a couple of small area where water will leak in. But we will see. The only complaint I have so far is the seal tape they supply for the front of the bed to be used if your truck bed has bed caps. Rams do. This seal tape is meant to fill the gap at the front. The tape should be better quality. It did not want to stick to the bed. I did follow cleaning procedure before I applied it. This is the only reason I did not give it 5 stars. These hard roll up covers are pricy so I hope it is a quality product. As far as E-trailer and their sales/service they are the best.
Overall this has been a great hard tonneau cover. Installation wasn't too difficult, it's not 100% water/dust proof, but I don't think any tonneau cover ever is. It stood up to several heavy snowfalls over the winter without any issues and it still looks good with no noticeable fading of the vinyl covering. The roll-up convenience is great when you need the whole bed compared to a fold-up tonneau that can block the rear window when folded all the way up. The only issue I have run into is occasionally the rear most clips that lock the tonneau down can slide out slightly from their fully seated position and it can make it difficult to close. It's easy to push the clip back into place, but the first time it happened it was a little frustrating.
It does a great job at what I wanted. Lockable, a rollup that impedes full bed loading less than most, does not block vision from back windshield. It is sturdy reinforced so doesn't sag or or make wind noise. Nothing is break in proof but you have to be pretty determined to get in this. Nothing is rainproof but the limited amount is very acceptable to me. The top still looks good after a year of snow and sun. The installation was a little fussy and you do have to have your rails diagonally squared! 3 hours for me, but I could do it in half the time now with lessons learned. I thought it was pricey but I'm happy with it and would buy it again.
Easy installation and easy to use. Cover looks good on my truck and appears to be very strong
After one year, still solid and working perfectly. Keeping secure and dry.
After reading the instructions a few times it went together easily and fits like a glove. Very happy.
This is a well made bed cover. Easy to use, solid and secure, but not in the way when open. I love that it does not block my back window when driving with it open. The fabric on top of the aluminum is high quality and looks good. Highly recommend, I'm actually happy there was not a back flip for my truck, as I wanted to ordered one, but this is a better solution.
If it was practical to return it, I probably would. I am a farmer and a mechanic, so I can live with it, but not very good. Install was complex and baffling as I have a Ridgeline which is not standard. The worst feature is the back latch or uses a cable pull and two sliding latches which are just trash. Poor design, bad functionality and breaks easily. Mine jammed up and would not unlock, and ended up breaking the cheap plastic lock assembly to get in, result of poor design. Still jams and easier to just leave it unlatched and unlocked. Small rubber seal at endgate fell off and lost. Looks good, secure when it works. Expected more.
The quality of the cover overall is quite high and has potential when fitting correctly. The problem is the fit on the RamBox trucks. I had to heavily modify the rails to get them to fit properly. I was told to return I would incur a 15% restocking fee and get no credit if it was not able to be put back on the shelf. So I was tasked with finding a solution on my own (tech support was no help). I ripped 1/4" off the aluminum rails using a table saw and notched around the bolt holes. After this modification it fits well.
The TruXedo Sentry CT Hard Tonneau Roll up, is AMAZING. It fits my 2026 RAM 3500HD Dually like a glove. Couldn't ask for a better fit.
Fits good easy to install with my sports bar
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.