To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
When your hands are full or the weather turns, being able to open or close your cover quickly makes a big difference. The Bedlocker retracts or closes in under 30 seconds using the included remote key fob. The electric motor wires directly to your vehicle’s battery, and an electro-magnetic brake stops and locks the cover anywhere along the rails. That means you can secure or partially open it exactly how you need without climbing into the bed. If power is ever lost, a manual override lever on the canister lets you operate it by hand until power is restored.
Rain, dust, and snow can ruin what’s in your bed—especially if you haul tools or gear every day. The Bedlocker’s powder coated aluminum panels are built to keep out the elements and resist corrosion over time. Tight silicon weather hinges seal between each interlocking panel, and a weather-barrier seal at the tailgate blocks water and dirt from sneaking in. When paired with a locked tailgate, the solid aluminum construction adds strong protection against break-ins that soft covers can’t match.
Hauling tall or bulky cargo doesn’t mean losing your cover. The Bedlocker retracts neatly into its angled canister at the front of the bed, keeping your rear-window view clear and leaving maximum space for tools or equipment. The canister also shields the retracted cover from weather and debris so it stays clean and dry when stored. Drain tubes route any water through the truck bed’s drain holes, keeping the rails clear and preventing freezing in cold weather.
A low, flush-fit cover doesn’t just look better—it helps air slip over the truck instead of catching under the rails. The Bedlocker’s side rails mount level with the bed caps for a smooth, factory-style appearance that reduces drag and can help improve gas mileage when closed. The black powder coated finish matches most trim and keeps its color through years of use without looking bulky or out of place.
Installing a power cover can sound complicated, but this one is straightforward. The rails clamp inside the bed using pivot-arm clamps—no drilling needed. Each rear clamp includes a kickstand that levels the rails and prevents overtightening. Once the canister and rails are in place, just connect the wiring harness to your battery and you’re ready to go. The design keeps everything solidly mounted while leaving your truck bed clean and uncluttered.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Colin: Hi, everyone. It's Colin here at etrailer. Today, we're going to take a look at Pace-Edwards' line of retractable hard tonneau covers. Now, as you can see, it's working right now. This is a really high-quality cover. It's got an electrical motor where we can just open it and close it at the touch of button with included remotes.Now, like I said, this is going to a very high-quality cover.
Just being able to open and close your cover at the touch of a button is a really convenient feature. We no longer have to undo a latch when we open up our tailgate and pull the cover all the way open, whether we've got a canister, maybe you got a hard roll-up cover, and you have to roll that all the way up to the cab. Even those trifold covers with the aluminum panels get heavier as it comes back.By the touch of a button, maybe your arms are full of cargo that you want to go to throw in the bed of your pickup, instead of having to set all that down and then open up your cover till we get it all in, all you got to do is reach in your pocket, press the open button on your remote. Your cover is going to open up. Now you can access your truck bed.
You don't even have to open up the tailgate either if you just want to grab something out.You know what's nice about that is if you have loads that are going to be propped up on your tailgate instead of keeping it open, you could just go ahead and close your cover up to the point where it's going to make contact with the box. Right before it does, we'll just click the open button to stop it. You can actually travel with it in this position.Now, a couple of things that I really like about this cover, besides fact that I can open it with a touch of a button, it's a hard cover. So, you can see we've got really durable aluminum slats, making the cover very rigid and tough. It's going to help deter theft.
It's also going to have a very low profile look to it. It's not one of those covers that's going to stick 1", maybe 1-1/2", above your truck bed. At it's tallest points, we're barely at 1/2" right here. So, you're really not even going to notice it when you're looking out your rearview mirror. It's also going to help improve your fuel economy.Another thing that's great about it is that you're no losing any of that visibility when you want to open up your cover.
So, as we open it up, with a hard roll-up cover, you would roll that all the way up to your window right here, but that would be taking up about half that visibility. So, I won't be able to see everything that's behind you. Whereas with our canister option fully open, we have access to our truck bed, and we're not losing any visibility.Now, what you do want to keep in mind, though, is that the canister is taking up some space on the inside of your truck bed. However, you can see underneath, there's still space to store stuff as long as you're not making contact with those drain tubes. So, you got some smaller toolboxes, maybe some boots that you want to throw underneath the canister, you have that option, so you can use that space.This is going to come with two drain tubes so that if any water would we're to build up inside your canister, it has an option to drain out without going on the inside of your truck bed.Now, we've got our power cord ready here. We have our connection made. We just have a cord coming out of our canister from the motor. Then our cord right here, we have run through our stay-pocket hole. It goes down to the frame of our truck. We ran it up to our engine bay, and then ran it over to our battery to draw that power.Now, there's also a cord right here. This is an optional switch that you're going to install on the inside your truck. So, if you're on the inside, you know that you're going to have to access your truck bed and you need that tonneau cover open, you can just flip that switch inside your truck bed, and then it's be open when you get out of your truck to utilize that truck bed space.We have two clamps on each side rail making sure our tonneau cover's side rails stay secure against our truck bed. What's nice is that our rear clamps actually include this kickstand right here to make sure that the back of our cover right here stays level with the front. That ensures that our cover is operating smoothly, and it's not going to grind inside the rails.The entire cover, including our cap right here and our side rails, is a really nice matte black powder coat finish that offers a really stylish look to add to your truck. It's also going to help and resist that rust and corrosion. So, it's going to be around a long time.We do have a nice weather seal on the back of the cover. Right here, it's making contact with our tailgate, so it's going to help ensure that the elements stay out of your truck bed. That combined with the toughness of and the durability of the cover, it's going to help your contents protected.There is a manual override switch right here. All we got to do is pull up this lever. That will disengage the motor, and we just property it up. This is handy for times where maybe your battery has died and you need to open up your cover. You just pull that switch up and then close it or open it manually.Now, our truck right here is already equipped for some lights to be able to illuminate the bed of our pickup in case we don't want to open up the cover. However, if your truck does not have that, we got other options available here at etrailer if you just want to throw up a couple of lights. That way when you open up your tailgate, you can just turn them on, and you got vision inside the bed of your pickup.Overall, thing's a really nice cover from Pace-Edwards. We got another electrical retractable tonneau cover on website. Its' from Retrax. inaudible 00:05:05 just kind of compare them. They both operate, obviously, with the remote where you can open and close it with a touch of a button.The one thing I will stay about the Retrax that's a little nicer is that they have a spiral track system on the inside of their canister. So, when the cover is opening, it doesn't roll up on itself. It has its own little canister where it rolls up. It stays in that spiral system to where it's not going contact with itself while it's in the canister.The Pace-Edwards, it does just roll up on itself. However, there's really not too much worry about with it. It's not really going to damage itself at all.Now, one thing that nice about the Pace-Edwards is that one, it's more economical. It's going to be a little bit more affordable. Like I pointed out earlier, I like how we have these kickstand clamps right here to make sure that our cover stays level, especially our side rails right here. It's going to ensure that our cover operates smoothly throughout it opening and closing.Well, I appreciate you all for watching, and I hope this information helps you out. That will do it for our look at the line of Pace-Edwards hard retractable tonneau covers.
Ratings & Reviews
After getting all of the parts I can put it in now
great product. exactly what i expected and easier than imagined to install.
Great product, easy install no more removing tools every night!
Real good all in all. Does rub in the holding box whenever it’s all the way rolled in. Minor, but rubs.
The remote doesn’t always work. Sometimes you have to jar or push in the cover to get it to engage.
The cover does not work for carbon pro bed,even though in 2 places in your website it confirmed it did. We had to repackage and return. Your website needs corrected,and no one seemed very concerned. Bad experience. I hope I get my credit in a timely m
Great tonneau cover. One year later and still functions like new.
Great service,
Installation went good and it opens/closes smoothly as of today Monday 8/26/2024. Customer service was fantastic when I called them twice.
ALL GOOD FAST DLV
My last truck had the Pace Edwards Bedlocker, so when I got a newer truck I had to get another Bedlocker. Great security. Electric opening without a key. To someone wanting to break into the bed there’s no apparent way to open it.
looks and works great!!! easy install fit my 2024 gmc sierra 3500hd denali perfectly
I love this tonneau. I would reccomed going with this model, but getting the tracks that support their racks. It was Covid time and stock was short. I was lucky to get this one. I would go with 4.5. I think they should have put a more powerful motor. Sometimes it doesn't have the power to open all the way. On another note etrailer was awesome. The rails were bent when the shipment came, they took rails out of there last one in stock and sent them so I could get it installed before my cross country trip.
Excellent, as always!
I was looking for the very best for my 2022 Chevy Silverado 3500HD High Country and when you want the best, you get Pace Edwards. I've owned other brands before on other trucks such as Roll-n-Lock and ReTrax and both are great products, but for this truck, I wanted nothing but the best. With the track record and quality that comes with Pace Edwards, this is why they are the top of the line. I installed this cover completely by myself, a helper would have been nice to have, I was able to get it done with no issues.
The cover fits perfectly and looks like it was supposed to be there. etrailer's customer support is always top notch and the representative I spoke with on the phone made it so easy to order, she was very friendly and helpful. Everything came well packaged and undamaged. The 2 included remotes are nice, but I also ordered to sets of the accessory wired switch kit. I wired them together, sending 1 switch up front, inside the cab. The other to the back corner of the bed wired up to a weatherproof switch. I spent more time on the wiring than I did installing the cover.
The only thing that kinda bugs me (and this is 100% personal preference NOT an issue with the product) is the tailgate seal at the edge of the cover, the shape and design of the seal is such that it's a double wall flap with a hollow center. Now they may have intended it to sit on top of the edge of the tailgate, but I prefer how it looks butted up against the tailgate like a door seal, which makes a U shape. However I have to keep pushing it down to keep it flat across the back. I may end up sliding a small round piece of weatherproof foam inside, all the way across to create more of an bicycle tire affect, the foam keeps the seal "inflated" while pressure holds it tight when closed up. But that's just me.
Overall, VERY pleased with the products and service. The cover and wiring harness are both high quality, comparable to GM factory. I highly recommend this, well worth the money.
ALL GOOD FAST DLV
The best cover ever my first one is 2011 is still working and this one works great also
very nice product, Amy J in customer service was awesome to work with! A+ all around
Love the pace Edwards electric retractable bed locker cover with remote. Super convenient .Looks great.
It is not 100% leak proof, minor water intrusion . Also below zero temps the cover will freeze up if accessive water is on it. I rinsed my truck at self serve car wash 20 degrees out and the cover froze up and could not get my Christmas tree in it.I was on a northern Christmas tour. Had to un thaw before it would open.however I do live in Florida so freezing is a non issue … this cover fits RAMBox which many covers will not.
The canister is a bit heavy and awkward for one person to get into the bed. But if this old guy can do it, so can you. Followed the instructions and, for once in my life, didnt have to take something apart to redo it correctly. Just take your time and its actually quite simple. The cover works perfectly, almost completely waterproof seal (maybe I just got lucky) and makes getting access to the bed 1000x easier than the trifold on my previous truck. Top quality, fit and finish are perfect. Would recommend Pace Edwards every time.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.