To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Rain, dust, and snow can make a mess of anything left in your truck bed. The Revolver X4ts seals out the elements with a reinforced, double-coated vinyl top backed by aluminum slats. The self-tensioning frame keeps the cover tight so water runs off instead of pooling. Beveled edges channel moisture away, and built-in weather seals keep your gear dry without needing drain tubes.
When it’s time to haul something tall or oversized, you don’t have to remove the cover. The Revolver X4ts rolls up quickly by hand and secures with hook-and-loop straps and buckles. It stays out of the way so you can load up sheets of plywood, tools, or camping gear without losing visibility through the rear window.
If you run ladder racks, bike mounts, or overland gear, this cover is ready for it. The built-in T-slot channels make it easy to attach Yakima, Rhino-Rack, or other T-slot rack systems right onto the bed rails. You can haul kayaks, cargo boxes, or roof tents while keeping everything under the cover safe and dry.
A bulky cover can ruin a truck’s lines. This one sits just 1-1/2" above the bed rails for a flush, streamlined look. The textured matte black finish matches modern trim and resists fading or scratching over time. It locks down tight against the bed rails for a smooth appearance that doesn’t rattle or lift at highway speeds.
You don’t need drills or special tools to get this cover installed—just clamp it inside the bed rails and you’re done. Pinch levers let you open it easily from either side, while heavy aluminum slats and a locking tailgate keep your gear secure when it’s closed. Whether you’re parked on the jobsite or trailhead, everything stays shut tight underneath.
Ratings & Reviews
Great cover. Easy to install. I like the ability to set objects on top of the topper without worrying about damage. My only dislike would be how hot the components get in the direct FL sun. It could easily burn your hands when rolling the cover up to its retracted position.
Fit is a little tight at the latch end even after removing shims, but overall very nice and sturdy. There was some minor damage to the product when it arrived, but nothing that impacted its function or outward appearance. Much nicer than the Revolver (old name) that I had on my last truck.
Literally the best cover there is on the market. It’s sleet. It’s durable and I get compliments everywhere I go. Thank you etrailer.
Great fit and easy to install
I like its slim profile look and solid top. I highly recommend this cover with the following exception. In cold weather, the top can freeze in its tracks after a car wash or rain. It is then almost impossible to roll up without putting a heater in the bed. This is the only reason I give it 4 stars. I still would buy it again since I don’t roll up the top much in the winter.
I’ve had this for a year now. The good: Very nice product, I recommend it. The rollaway ease is great - quick, easy, compact and reliable during near every day use. Effective watertight (not water proof) seal. Definitely recommend the rugged vinyl of the X4 over the X2.
The not so good: the ribs can get kinked and are hard to work back into position when they do. This was really only an issue during initial install, so just be cautious to avoid letting it bend the wrong way. The plastic end caps on the lock rail can pop off, so I recommend using adhesive to hold them firmly in place.
Overall it’s great. Definitely recommend.
Good quality but very overpriced.
The tonneau cover fits as advertised no leaks it has been a great addition to my truck I really like the way I have my whole bed to use and still have the security of a hard cover without blocking my view out of the rearview mirror for hoking up my fifth wheel trailer.
I wanted to like it a lot, but it definitely came with some problems. Ive had it installed for about a year and it has been nice to secure my stuff and still have the option of a completely open bed. Unfortunately it required some tweaking and a bed length shim to fit my truck, which was supposed to be custom fit. I also had to recrimp the release cable once, and the rails frequently ice up in the winter, making it hard to open.
Great cover! Easy to install by yourself with no help. I've had this cover for over a year. It has held up great with no sun fade, is extremely durable and has a great seal to keep the weather out of the truck bed. 100% recommend!
would have given it a 5 star rating ... BUT ...on a VERY windy day in Kansas ... somehow the cover bowed enough to slip out of the latch rail ...very strong side-wind & it was seen floating up & down in my rear view mirror ...I quickly pulled over to secure it! The small rear corner plastic seal was lost and the other later became so warped in the summer heat it was unusable - after an extended period of being in rolled /stowed position! So now I get a wet rear bed liner when I drive through rain & the carwash ... but as my one initial experience with the customer service was not great I have not followed up on trying to get replacement parts! I use black gorilla tape to seal the rear corners! Othe than that -I really like the security for my truck bed contents, the ease of use ease of install and I just double check the latch (& rail alignment) by thumping it upwards each side before closing tailgate ...no more issues with side-winds!
I've had it for about a year now. Good quality and provides excellent security to your cargo bed. Freezing temperatures can make it difficult or impossible to roll up, especially after being exposed to wet conditions-then freezing. I've had to go through the heated car wash a couple times in order to thaw it out to roll it up. However, I would definitely still buy again.
Well made, easy install.
Love this cover and after a year no fade and still looks brand new.
Customer service from E-Trailer was exceptional as usual big shout out to Cammi F. Thank you for keeping me updated as this was actually delivered from manufacturer.
Purchased this in February. By August this product was already failing. As a roll up tonneau you would expect it to not fail where the cover sits when rolled up but that is exactly what is happening. Photos speak for themselves. I do not recommend you purchase this.
Will be reaching out to customer service today. Will see how how well they support their product.
I had these mirrors (same brand but different model) for my 2016 Silverado and used them for the past 8 years when towing our camper. They installed easily and quickly and were also easy to remove until I needed them again. Since getting a new Silverado I opted for these type of mirrors again. I test fit these new ones and again they go on and off easily. I anticipate them holding up as well as my old ones
It works great. However, it was a bit harder than advertised to install.
Mostly a great cover. I've had this cover on my 2021 Ram 8' bed for 1 year. Install took about 45 minutes. There are 2 issues. After snow or rain and temperatures drop below freezing the cover's locking system along the rails freezes making it very difficult to open or close. You have to go the rails and pull the mechanism free. This year I will try WD 40 prior to the winter season to displace moisture.
2nd, issue two of the hinged supports in the cover separated after being rolled up during a several day trip. One about 3 months ago the second 2 weeks ago.The first one was mostly cosmetic. The second separation would not allow the cover to close without forcing it. I contacted BAK and they quickly opened a warranty claim. After sending them photos and a description of the problem they sent a replacement cover. The 5 year warranty is a pluse. Hopefully this is a one off issue. If I have the issue again I will ask for a different cover.
This is my second BAK cover. I had the flip before this one. I definitely prefer this roll up style as it is much easier to open/close and not nearly as heavy. It would be 5 stars except for the fact that I have to constantly re-adjust and pull the cover back towards the tail gate. It seems to slide forward a micro amount with each opening. So after a few weeks of opening and closing there is a small gap between the tailgate and cover so I have to move it back to seal the gap. Otherwise love this cover.
The original cover was improperly sized from the factory (direct shipment from BAK due to backorder). etrailer, as usual, went above and beyond to get me the correct fitting cover. The new cover fits perfectly and looks great on my truck. Hopefully it will last, though I worry about the quality considering BAK did not notice they sent me a cover with the wrong dimensions originally. Giving 4 stars due to poor QA from the factory on the original shipment.
I am happy to report that after a year of use since I installed it, my Revolver cover is still solid, and in perfect condition. Only once did I have a little trouble opening it due to the locking rails icing up during an extremely cold day. I was able to free it up with minimal effort within a few minutes, and without causing it (or me) any damage.
The cover looks great, keeps the bed dry, and I’ve received many compliments. Also, even with my full 8’ bed, it doesn’t restrict my view through the rear window when rolled up.
Very happy with both the product and the customer service. Originally I was given a ship date and that date changed after the order was placed. I emailed with Lauren and she was great! It was delivered one day ahead of the original time. This is my second BAK Revolver cover. I had the first on my truck for eight years until I sold the truck. The cover is secure, almost watertight, and looks amazing.
Looks great!
Works great, and our camping generators fit under it!
Do you have a question about this Tonneau Cover?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.