Replacement In-Cab Controller for Meyer Snow Plow

Video Transcript for Ultimate Overview of the Replacement In-Cab Controller for Meyer Snow Plow

Today we're gonna take a look at the replacement membrane switch for Meyer snow plow.Now this going to replace maybe a broken or damaged switch on your vehicle to control your snow plow. It's going to have the on, off switch there at the bottom. And then our controls for our plow itself. It's going to give us the up, down, or left and right adjustment of the blade.There's also going to be a float indicator light right there on the bottom left side of our switch. Or an overload at the bottom right.We'll have our six pin connector at the one end of our wire. And we'll also be able to attach this switch using the hook material on the back.

There's sort two strips there that are going to connect to the loop material. This is gonna create a nice, easy way to remove our switch without having to permanently mount it in our vehicle. It's just going to hold that switch really well.On the back of the loop material, there's some adhesive. So you can clean off your dash or whatever area you choose to mount this, press the loop material into place, and then you can attach your switch.The loop material does come with the switch as well.As far as the dimensions, our switch is gonna measure about three and a half inches across at its widest point. And it will be about the same the other direction.

It's more like three and three quarters of an inch with that switch at the bottom there and with our wiring coming off. And then the width is going to be about one and a half inches.The cord coming off of our switch, that's going to be three feet long going from the base of the switch all the way out to the connector.And that's gonna do it for our look at the replacement membrane switch for Meyer snow plow.