Meyer Base Line 400 Motorized Salt and Sand Spreader - Tailgate - 6.3 Cu Ft

See what our Experts say about this Meyer Salt Spreaders

• What Is The Difference Between Meyer Salt Spreader ME86FR 3.7 cu ft And ME26FR 6.3 cu ft
  Hey Dennis! The # ME86FR is Meyer’s compact Base Line 240 model 3.7 cu ft, intended for lighter-duty use like small driveways or walkways. The # ME26FR Base Line 400 steps you up to ~6.3 cu ft for mid-sized jobs. As you go up in size, you’ll get less frequent refilling but need more power, stronger chassis, and better support for the extra weight. Do you know roughly how much area you’ll spread in one go? That can help pick the sweet size without excess weight.
  view full answer...
• Do Meyer Tailgate And Hitch Mount Salt Spreaders Come With Vibrators To Prevent Clogging?
  Jorge - you heard right. The Blaster lineup # ME98FR and # ME48FR includes a built-in vibrator to keep material flowing, especially when the salt or ice melt tends to cake or bridge. In wet or semi-frozen material, that vibrator helps prevent clogging in the throat or auger. The Base Line series #ME86FR and # ME26FR rely on a coarse auger and consistent motor drive, though their controller does include a vibrate mode if you add the optional vibrator kit later. The Blasters do come with...
  view full answer...
• Which Tailgate Spreader Is Best For 2" Receiver On 2019 Toyota Tacoma?
  Hey Ryan, great question. All five of those Meyer tailgate spreaders # ME86FR, # ME26FR, # ME58FR, # ME98FR, # ME48FR are designed to mount into a Class III 2" × 2" receiver rated for at least 500 lbs of tongue weight, so your Tacoma’s hitch fits the standard requirement. That said, the Blaster 350S # ME98FR is the largest model suited for mid-size or half-ton trucks like yours. The Blaster 750RS # ME48FR is much heavier and should only be used on a 3/4-ton or larger full-size pickup,...
  view full answer...
• Can I Tow Small Utility Trailer Behind Truck And Mount Meyers Salt Spreader To Truck Receiver?
  Laura, that’s a great question - and one a lot of folks overlook. The Meyer Blaster spreaders # ME48FR and # ME98FR fully occupy your 2" receiver and extend out past the bumper, so you won’t be able to tow a trailer while the spreader is installed. The hitch ball or coupler would be completely blocked. If you need to switch between towing and spreading, most users remove the spreader assembly when they need the receiver for their trailer. For smaller or lighter setups, the Base Line units...
  view full answer...
• How Does The Controller And Settings Differ Between Meyer Base Line And Blaster Salt Spreaders?
  Hey Brenda, for Base Line models like 6.3 Cu Ft # ME26FR and 3.7 Cu Ft # ME86FR, you get an in-cab touchpad controller with “fast, slow, vibrate” modes so you can tweak output without stopping (vibrator is not included with base line models). The Blaster models like 6.5 Cu Ft # ME98FR and 12.8 Cu Ft # ME48FR offer advanced controls, including a vibrator, blast mode (a surge of power) and automatic spinner shut off when braking, so you avoid waste at intersections. See photo on this page...
  view full answer...
• Can I Swap Meyer Base Line Salt Spreader And Blaster Salt Spreader On The Same Truck?
  Marcus, interesting idea. In theory, yes, both are 2 inch shank tailgate spreaders and could share the same receiver and wiring setup, so you could swap out Base Line # ME26FR or Blaster # ME48FR depending on the job. That said, the extra weight of # ME48FR may stress your bumper or suspension when in place, depending on which truck you have. Also, I think it would be a bit pointless to have two different spreaders for the same truck. If you sometimes do light and heavy jobs back-to-back,...
  view full answer...
• Does Meyer Base Line 400 Motorized Salt and Sand Spreader Install on Trailer Hitch
  Hey Ryan! Yes, the Meyer Base Line 400 Motorized Salt and Sand Spreader # ME26FR is designed to fit a 2" receiver. If you have a 2-1/2" or 3" receiver you can use a reducer like # e26YR or # e33YR. You will also need to run the wire for the controller up to the cab for installation.
  view full answer...

Do you have a question about this Salt Spreader?