Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.
Features:
Specs:
The bases of these Rhino Rack legs easily mount into the included Rhino-Rack RTC-style roof rack tracks with included hardware. Just slide the nuts into the tracks, line up the mounting plates, and bolt the bases down. After this initial setup, you can leave the bases in the tracks.
Molded inserts help keep out dirt and provide a finished look when there are no legs and crossbars installed. To install a leg, simply remove the insert.
Once you've set up the bases, installing and removing your roof rack is easy. The Quick Mount legs have an integrated trigger system that creates an easy, tool-free installation.
To install a leg in a base, pinch and slide the internal triggers together.
Lower the leg onto the base and slide the internal triggers apart to secure the leg in the base.
Once the leg is installed in the base, replace the cover and lock it to help secure the system to your roof.
Alternate Instructions
Average Customer Rating: 4.7 out of 5 stars (3380 Customer Reviews)
Adapt your camper shell, hard tonneau, or hardtop resin roof to carry gear with this roof-rack system. Locking, Quick Mount legs mount to tracks. Black, Vortex Aero crossbars accommodate clamp-on and channel-mount gear.
I have owned this Rhino Rack System with tracks and the Aero Crossbars for over a year. It has held up well during this time. I use it mainly to carry 2 kayaks totaling approximately 110 lbs. The Aero Crossbars are sturdy and easy to take on and off. The lockable bar option is a good choice for added security. With the Crossbars removed the mounting tracks are hardly noticeable as can be seen in the picture. I have been very pleased with this rack system and would recommend it.
Ordered Item: Y02-500B to mount over my Tonneau cover on my 2015 Ford F150 with a 6.5' truck bed. Mounted side rails that crossbars slide in to a piece of 2"x1" aluminum square tubing. Mounted to truck bed with compression stake pocket inserts. 65" crossbars were 2" short and had to order Item: RRVA180B-2 to get the 71" crossbars. Had to customize several parts but overall I am very happy with the outcome as there is not many options that are minimally invasive for a permanent installation. (Zero holes were drilled into truck bed all mounting was completed with compression stake pocket mounts. I am able to use all attachments for summer and winter activities. (bike mounts, snowboard mounts, paddle board SUP mounts, and fishing rod mounts) Picture with my Thule SUP Taxi mounts. Plus rack is easily removed with 4 bolts. Can also access and use bakflip tonneau cover by removing crossbars in less than 20 seconds.
The product works great to support loads. The cross rails connection method works great to position mounts anywhere along the cross rails.
The supports quick connection spring loaded tabs do not work well in cold weather making it difficult to remove or install in low temperatures.
When installing a soft fold out roof top tent make sure that the length of the rails won't interfere with a zip-on awning connection. The folding hinge point of the tent needs to be just off the ends of the rails to allow easy access to the awning zippers or tent cover hinge point. This means that the tent will mainly be on one side of the vehicle... not centered.
Very nice product. Installation was straight forward.
Absolutely the best. So glad I chose this product over others
I have a 2012 Camry hybrid and haul a 180 L windsurfing board. My rack came as promised but lacked one of the bolts needed. I made one phone call and the missing bolt was on my porch in 2 days.
There's virtually no wind noise, surprising since the car is very very quiet at baseline and I expected there to be some.
My car lacks tie down or towing attachments so I got some of the loop type that clamp under the hood and trunk.
I'm very pleased with construction, fit, ease of use, and customer support. I'd buy it again.
Great addition to the bed track of my 2022 Hyundai Santa Cruz! I got these for my rhino rack rod holder since they made such noise on the oem roof rack. So happy I went with rhino rack. You can't beat the price and the quality is as good if not better than Thule or Yakima. Highly reccomend.
Rhino rack does not stand behind their product. Beware had 3 broken and they won't replace the items. The end caps don't latch. Sent several pics per request for correction and the warranty dept just stopped responding.
Buyer beware, this is not a 1 off problem, the design is flawed. Cheap plastic is supposed to latch but just twist tight under the metal and after a half dozen or so adjustments the plastic is worn off.
Don't buy these.
I wanted to share the items I used to be able to haul two Wilderness Systems Tsunami 145 kayaks on my 2006 Scion xB. This may help others who struggle with deciding what to use. I am pleased with my purchase and hope this helps. I originally thought I wanted the Thule Hull-A-Port Aero, but they discontinued making the fit kit for their roof rack systems and I ended up going with the Kuats. I am glad that they didn’t make the fit kit for approximately $[XX] and so they missed out on the rest of my business. Here are the items I used for anyone interested – pictures included. Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof #DK138, Kuat Class 4 V2 Kayak Carrier w/ Tie-Downs - J-Style - Folding - 1 Kayak - Black #KU53VR and these are really cool, Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4 #RRRLKVA, Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2 #RRVA137-B2. The 54” crossbars fit really well and the perfect length in my opinion and it doesn’t stick out like the longer ones would. Also purchased two sets of these Malone QuickLash T-Style Hood Loops for Bow and Stern Tie-Downs - Qty 2 #MPG308.
Durable looking product and has an easy install. On the roof of my van for the past year and still looking good. Holding out for 5 stars because I'm eating to see how it holds up in the desert sun after a few more years. Rhino-Rack is very hard to get information from regarding their products but etrailer had all the answers and gave me confidence with buying the product.
2020 Ford Edge with Vista Roof. Product arrived ahead of predicted delivery date. Very easy to assemble and directions were very easy to follow. Product is very high quality. I found 150mm front and 140mm rear to be the correct dimensions (I read a feedback that said they were not correct). No problems with Vista Roof, legs sit on the metal roof part not the glass. Overall very pleased with my purchase.
Great product and easy installation. Much better than the Thule factory racks that came with the leer truck topper rail system. Also like how they can unlatch! I hauled a fishing kayak and a Yakima rod coffin case all the way from Florida to North Dakota. Racks are strong.
I shopped online retailers namely Amazon and EBAY looking for the cross bar setup I would need for my 2012 Toyota Camry LE. My Camry has a naked roof. The whole experience was confusing. None of the needed components were combined together. I found each component listed separately but nothing to indicate they were the correct components for my car. Then ETRAILER.COM popped up in my search. I simply entered my car’s year, make, and model, and answered the question about the car roof (being naked with no factory installed cargo bars) and suddenly I had a list of the available cross bars for my vehicle with all the necessary components to install them. One or two clicks put the whole thing in my cart for purchase. ETRAILER .COM is your one stop shop. As a side note I purchased Yakima ski racks on sale to install on these cross bars. Another customer asked if these ski racks would fit his car and I explained yes they will with the appropriate cross bars. I sent him to “ETRAILER.COM” so he could get the correct setup. Pictures forthcoming.
These were more expensive than other Amazon racks, but the quality and aesthetics of the Rhino-Rack ROC25 justify the higher price. The website and customer service are excellent; their installation videos were perfect for installing the Rhino-Rack on my 2015 VW Jetta. One year later, they're still attached without issues and look great.
Hi George from etrailer,
The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack.
I highly recommend this etrailer.
My Thule UpRide Roof bike rack mounted perfect in the T-Slots! Mounts easily and no issues in the Truxedo T-Slot rails on my Ford Ranger. Mounts perfect in Truxedo T-Slot rails.
The rack is great. Well made with quality components, and compared to other brands, a very good value. I purchased the rack(s) to go on the top of a new Leer canopy with factory installed rails, supplied by Thule. The Rhine Rack cross bars are a great and less expensive alternative to other brands.
My only complaint is that the Thule rails/tracks require the removal of end caps and mounting bolts to install the crossbar mounts, and that requires breaking the watertight sealing installed at the factory. That’s not the fault of Rhino Rack. However, if they could develop a mounting system (ZwifLoc?) that did not require access to the track from an open end, it would be SO much better!
The selection process that etrailer uses is top-notch. This really helped narrow down the choices for my 2019 RAM Quad cab. I bought this all kitted together. The assembly process is very straightforward and well-documented. I would highly recommend etrailer as a source for vehicle accessories. I have Yakima bike racks on our Subaru and this is as good if not better.
Jeep wangler 2024 4xe with skyone touch top .Amazing the setup for my fishing kayak 12 feet. Everyone was looking at my setup on the road , and it was secure. Big thx to Kurt w & Paul B to recomand this kayak setup
10/10 www.Etrailer.
Indeed they were the wrong parts in the box marked demo on them.
The new parts came and I was able to
Put it on my car with no problem!!
Thank you for listening to me and helping me problem solve. It looks great on my car and I'm ready to load the kayaks now!!
Kalie is a gal that sent me some return labels so I'm going to put that on the box and send it back to you guys!
very solid rack, it's not going anywhere. Several fasteners to affix to truck cap. Clean look for the First Gen Tacoma (1999).
My roof rack arrived today and I installed the rails.
The product is sturdy, and attractive.
I am very pleased with the quality.
Installation Instructions are clear and precise.
The most important detail is to install the tracks parallel to each other and square to the roof
I recommend taking time to get this step correct.
I had another rack at one point but this rhino rack is far superior.
I would recommend it highly.
This is the second vehicle now that I've put the Rhino-Rack Aero Bar roof rack kit on. The instructions aren't too hard to follow with basic assembly knowledge and etrailer has a video tutorial for installation instruction which helped also. I didn't realize the allen wrench they provided also doubles as the security bolt bit you'll need when installing the brackets into the tracks so I just picked one up at the local hardware store. It's a great value for this product and I never had issues with my last kit and don't anticipate any with this one.
Measurements that were provided were wrong, but I contacted support and they helped me get the right fit! Good experience and great work support team! Bars are solid. Added threadlock blue for security.
While these seem very popular and generally well reviewed ( the reason I tried them) I cant see why, generally cheaply made molded parts with a just adequate fit. Most shocking were the pins that hold the towers and bars down to the base being plastic. Im sure Ill find some use for them but it wont be with my carbon fiber canoe on top, I just dont have the confidence in the connection. While they may be aerodynamic they are definitely not quiet on my installation. The locks can easily be defeated with a screwdriver. At this price I would look at other brands that might have a more positive and secure fit from bar to base. The service from etrailer was its usually quick and correct shipment and delivery though!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.