Video Transcript for Ultimate Overview of the Phoenix Faucets Catalina RV Shower Valve w/ Vacuum Breaker

Today we're gonna take a look at the Phoenix Faucets Catalina RV shower valve with the dual lever handles in a brush nickel finish. Now this Catalina series shower valve will let you upgrade your bathroom shower valve in your RV or camper. This one you notice at the bottom uses a vacuum breaker which allows you to attach a handheld shower set to this. The handheld shower sets we do sell separately on our website. Once you attach that, this vacuum breaker will prevent the backflow contamination of your clean water supply. Notice it is a dual handle design with the leather style handles.

They do use a quarter turn cartridge stem which enables the faucet to fully turn on and off at a quarter of a turn so you can see on and off at just a quarter of a turn. Does use a washerless design, helps reduce friction and daily wear for long lasting durability. The whole faucet itself is a non-metallic ABS plastic construction. The back here is a one piece spin welded palm underbody with inlet shanks.The finish on this is a nice brush nickel finish. It is a wall mount design two hole installation.

The inlet shanks here have your standard male NPSM connections. Does include the deck plate. Two mounting nuts and the rubber washers are all included for installation. Now in your instructions they do require tile and tub caulk. That was not included.

Few specs on this faucet. The flow rate is 2.5 gallons per minute. Give you a few measurements on this. We're gonna measure overall width with the handles in this position. So end to end is gonna be right at nine and a half inches wide.

We turn them a quarter of a turn down. We'll give you the height of it from the tip of the handle to the top of the base. That's gonna be right at three and three quarter inches tall and of the depth of it from the front of the handle to the back of the base that way is gonna be right at three and a quarter inches deep.Now the dimensions on the base itself end to end you're looking right at six and a quarter inches wide by two and one eighths inches deep and these inlet shanks, the distance on those is a standard center to center measurement of four inches and the length on the shanks is right at one and a half inches long, but that should do it for the review on the Phoenix Faucets Catalina RV shower valve with the dual lever handles in the brush nickel finish.