Campground internet isn't always reliable. The Winegard ConnecT 2.0 creates a private RV WiFi network using campground WiFi or 4G LTE, keeping your phones, laptops, TVs, and other devices connected through one rooftop system.
Internet on the road changes from one campground to the next. Some parks have strong WiFi while others have slower or overloaded networks. The ConnecT 2.0 creates one private WiFi network inside your RV, then connects to available campground WiFi or 4G LTE cellular service. Your phones, laptops, streaming devices, and other connected equipment stay on the same network while you choose how the ConnecT gets online. Its roof-mounted WiFi antennas reach available networks from up to 1.5 miles away.
The ConnecT supports Winegard FreedomGO, AT&T, T-Mobile, and Verizon cellular service. A compatible Mini SIM card and active data plan are required for cellular internet. The SIM card slot sits behind the exterior SIM cover, so you can change compatible carriers without replacing the ConnecT. The system can automatically detect supported carriers, while the web interface lets you configure the cellular provider and APN when needed.
If you want to monitor your RV for water leaks, motion, temperature, humidity, or an open door or window, the Winegard Bluetooth Dongle adds the Bluetooth connection your ConnecT needs to communicate with compatible Halo Smart Sensors. Plug it directly into the ConnecT's USB port, then add the Halo Smart Sensor Kit, Halo Water Leak Sensor, Halo Motion Sensor, Halo Temperature and Humidity Sensor, or Halo Door and Window Sensor (WG52JJ, WG69BJ, WG49BJ, WG79BJ, WG89BJ, or WG99BJ - sold separately) depending on what you want to monitor. Sensor information and alerts are managed through the RV Halo app.
Choose a level mounting location that can securely support the ConnecT and keep each mounting foot at least 12" from the roof edge and nearby obstructions. Position the cable connections toward the rear of the RV. The included 20' power cable connects the rooftop system to 9V - 16V DC power inside your RV. For longer power runs, use 18-gauge wire and keep the total run to 50' or less. The circuit requires a 3A fuse. You'll also want Butyl tape and self-leveling lap sealant (AL66FJ and DC94SR - sold separately) beneath the mounting feet and around the feet and mounting screws to help prevent water intrusion.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ratings & Reviews
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.









Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.