Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replacement city water inlet solves your problem with a broken, leaky check valve. Feeds into your RV's fresh-water lines with a 1/2" MPT connection.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at the Valterra Flush Mount Water Inlet. This water inlet adds or replaces the water inlet on your RV. It conforms with federal or state laws for drinking water fixtures. It's going to feature the nice white plastic plaster flange. Now from outer edge to outer edge, that's going to give us a diameter of right around 3 inches, again from edge to edge outer diameter. The flange does contain 3 mounting holes.
Those mount holes are going to separated apart from one another on center by . Looks to be about 1 7/8 of an inch. Your mounting hardware is included. The screw heads are actually painted to match the color of the inlet, so that's a nice little feature right there. On the backside, we're going to have the 1/2 inch male pipe thread connection. The unit does include a check valve, garden hose, swivel fitting with the gripper allows you to easily connect it to our water hose.
It's going to have the press-in dust plug. It's going to come with the insulation tape and the mounting hardware. Now, this is going to be the insulation putty tape and this is going to be pipe thread tape. The unit's also going to feature appropriate seals for leak proof performance and it's got a wire mesh screen to keep unwanted items out, really nice design. We take a measurement of the depth that we have from the back of the mounting flange to the end of the connector, that's going to give us a measurement of 1 5/8 of an inch.
From the back of the mounting flange to the very front of the unit, that's going to give us a measurement of pretty close to an inch and a quarter. That's going to do it for today's look at the Valterra Flush Mount Water Inlet.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Tom S.
6/9/2018
They are working great.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
6/6/2022
This water inlet has a 2.75 inch flange that mounts against the exterior wall. We have several inlets to offer of varying sizes. Please see the link below.
Helpful Links
dept-pg-RV_Water_Inlets-sf-City_Fill_Inlet-tw-1~1%7C2_Inch_Diameter.aspx