As this is the first Travel Toilet I've ever owned I don't have anything to compare this to for this review. I'll start with the good: This was reasonably priced compared to other toilets I've seen on line, and looks well made and finished nicely. The height and width fit me and I'm 6' 2", 220. In use I didn't notice any odors after closing the plate at the bottom of the bowl, and the hand pump for flushing worked well. Emptying the bottom reservoir was easy using the spout provided. My wife and I used it on a two week trip in our small cargo toyhauler when we had to but mainly used the campground facilities.
The Bad: Right out of the box I had a problem. After putting it on the floor I attempted to separate the top from the bottom by pulling the lever in the back. I thought I heard a plink but the top came off easily and didn't think any more about it. I put the top back on then noticed the lever was loose which it wasn't when I removed it the first time. I removed it again and saw a slot that looked like a spring should be there. Luckily I found the spring on the floor and inserted it. The spring sits in a deep pocket on one end and has a short ledge on the other to keep it in. When you pull the lever to remove the top the short ledge disappears and the spring is free to shoot out whenever it feels like it. Find a similar spring as a spare or keep some ducktape handy to hold the lever in because it will happen.
Next, the gasket for the cap on the emptying spout. When I removed the cap when I got it out of the box the first time the gasket was crumbled up in the cap like it was hastily assembled. I removed it and tried to put it back in but the gasket is larger in diameter than the area it has to fit in. I tried my best with it and finally gave up and stuck it back in as good as I could get it. It needs a smaller gasket but seemed to work anyway.
Finally, holding it down. It is a smooth modern looking thing but there are no provisions I can see for keeping it from moving around. Maybe the manufacturer has one in the works but there are no notches, etc. for keeping it in one place. I finally got 2 small pieces of 3/4 plywood and scribed the shape of the base on the front and back on the plywood, sawed them out, and screwed them to the floor. A bungee cord keeps it tied down. Not elegant but it works. If you have a cabinet to put it in you may not need anything.
All in all it worked well even with the glitches I found. 319246
Julien
8/14/2020
The Camco port a potty has work just fine, Im 75 and one thing that it needs is a front handle on the waste tank to help move and carry the heavy tank.