Replacement city water inlet solves your problem with a broken, leaky check valve. Feeds into your RV's fresh-water lines with a 1/2" MPT connection.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at the Valterra Flush Mount Water Inlet. This water inlet adds or replaces the water inlet on your RV. It conforms with federal or state laws for drinking water fixtures. It's going to feature the nice white plastic plaster flange. Now from outer edge to outer edge, that's going to give us a diameter of right around 3 inches, again from edge to edge outer diameter. The flange does contain 3 mounting holes.
Those mount holes are going to separated apart from one another on center by . Looks to be about 1 7/8 of an inch. Your mounting hardware is included. The screw heads are actually painted to match the color of the inlet, so that's a nice little feature right there. On the backside, we're going to have the 1/2 inch male pipe thread connection. The unit does include a check valve, garden hose, swivel fitting with the gripper allows you to easily connect it to our water hose.
It's going to have the press-in dust plug. It's going to come with the insulation tape and the mounting hardware. Now, this is going to be the insulation putty tape and this is going to be pipe thread tape. The unit's also going to feature appropriate seals for leak proof performance and it's got a wire mesh screen to keep unwanted items out, really nice design. We take a measurement of the depth that we have from the back of the mounting flange to the end of the connector, that's going to give us a measurement of 1 5/8 of an inch.
From the back of the mounting flange to the very front of the unit, that's going to give us a measurement of pretty close to an inch and a quarter. That's going to do it for today's look at the Valterra Flush Mount Water Inlet.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Ratings & Reviews
Water trapped between the internal anti backflow valve and the motorhome tank flush valves will freeze and burst the back of the plastic water inlet.
Otherwise the water inlet does its job.
Good product, easy to insatall and looks like it belongs on the trailer.
We ordered this to replace the original part on our Cedar Creek camper. Since the installation a year ago it's working fine and was a good replacement for our broken part.
Not a universal fit for campers with this style fitting. The current housing on my camper would not accommodate the flange which was why I wanted it to begin with since the missing flange on mine allowed a gap around the hose connection for an ant freeway into the camper.
Looks like the direct replacement for my 2018 Intent.
Perfect fit
Received exactly what I ordered
NIce upgrade from old one. Comes with everything you need to install.
Exactly as described. Arrived on time.
good product for the price
Perfect
Exactly what I asked for with great service in a timely manner.
The inlet valve worked great on our 2018 24d view RV.
I am a grandma and I was able to intall this myself. After a year of use I am extremely happy with it. No leaks and easy to screw in the hose. Great product.
Perfect replacement, went on easy.
Products were received timely. All products fit perfectly all the way down to the screw placement. Very satisfied.
Other than a shipping delay (had to wait 10 days) this item arrived and I am satisfied.
Replaced an old one. The plastic fitting was easy to screw on. The flange was nice and plyable and fit nicely tomy aluminum siding camper.
This item is exactly as it is advertised. It was a perfect replacement, exact same hole pattern. I like the added items to assist in the install. Nice touch, someone put some thought into that. Thank you.
Excellent fit ,better quality than my original fitting. Fully synthetic, no metal parts to rust , corrode.. has a great seal that comes along with product.
When tightening a 1/2" adapter to the inlet to prevent leaking, another method must be used to hold due to rotation of the plastic 1/2" mpt portion of the inlet inside the flange.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.