bing tracking image
  1. RV Waste Valves
  2. Valterra
  3. Single Waste Valve - Manual
  4. 3 Inch Hub
  5. Stationary Valve
  6. Straight Valve
Valterra Bladex Waste Valve for RV Black Water Tank - No Handle - 3" Hub to 3" Spigot

Valterra Bladex Waste Valve for RV Black Water Tank - No Handle - 3" Hub to 3" Spigot

Item # T40NH
Retail:$25.68
Our Price: $20.90
You Save: 19%
RV Waste Valves
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Videos

Need help with installation?
Locate installers near me
Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. 3" Hub slides onto sewer pipe. 3" Spigot slides into sewer pipe. Handle sold separately Great Prices for the best rv waste valves from Valterra. Valterra Bladex Waste Valve for RV Black Water Tank - No Handle - 3" Hub to 3" Spigot part number T40NH can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (9)
  • Q & A (0)
  • Videos (1)
  • Photos

Valterra RV Waste Valves - T40NH

  • Single Waste Valve - Manual
  • Valterra
  • 3 Inch Hub
  • Stationary Valve
  • Straight Valve

Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. 3" Hub slides onto sewer pipe. 3" Spigot slides into sewer pipe. Handle sold separately


Features:

  • Replacement valve for your RV's black-water tank
  • 3" Diameter passage allows wastewater to travel freely when valve is open
  • 3" Hub slides onto sewer system pipe
  • 3" Spigot slides into sewer system pipe
  • ABS solvent cement (sold separately) required for installation
  • Handle sold separately


Specs:

  • Length with valve open: 12-3/4"
  • Length with valve closed: 9-1/4"


T40NH Valterra Bladex Motorhome Black Water Holding Tank Waste Valve - 3" Hub x 3" Spigot - No Handle





Video of Valterra Bladex Waste Valve for RV Black Water Tank - No Handle - 3" Hub to 3" Spigot

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Valterra RV Sewer - Waste Valves - T40NH Review

Today we're going to be taking a look at the Valterra RV Waste Valve. This unit simply adds or replaces a waste valve in your RV's waste system. It's made from a strong and durable black plastic construction. The valve is going to feature a 3 inch hub on 1 side and a 3 inch spigot on the other. Starting on this side we'll go over the outer and inner diameter. Outer diameter we're looking at about 3 and 1/2 inches, inner diameter we're looking at right 3 inches. On this side outer diamter is 4 inches, inner diameter is 3 and 1/2 inches.

The unit does not come with a handle as you can see here. It has the stem with a threaded connector but the handle is sold separately or you could use your own if you already have one. But that handle is going to be what controls the blade x valve. Opens and closes. Now the unit is already assembled, it has the appropriate seals internally that are installed for leak proof performance. I'm going to give you an overall length measurement with the handle rod and the fully down position.

Measuring from the top of that rod to the end of the unit we're looking at about 9 and 1/4 inches. Then with that extended all the way out we're now looking at an overall length measurement of pretty close to 12 and 3/4 of an inch. That's going to do it for today's look at the Valterra RV Waste Valve.

Customer Satisfaction Score:


Customer Reviews

Valterra Bladex Waste Valve for RV Black Water Tank - No Handle - 3" Hub to 3" Spigot - T40NH

Average Customer Rating:  5.0 out of 5 stars   (9 Customer Reviews)

Replaces the valve for your RV's black-water tank. 3" Diameter passage allows wastewater to travel freely when valve is open. 3" Hub slides onto sewer pipe. 3" Spigot slides into sewer pipe. Handle sold separately

by:

Great replacement product for a tight area, I didn't have any flex or extra room so was able to cut the pipe on the hub side of existing and use the spigot side of the replacement with a rubber connection. also was an excellent price.



by:

Gate valve works as expected.



by:

Fast shipping and the waste valve works perfectly!



by:

Quick turnaround and good prices!



by:

Hard to find part and they have it and delivered just that- good seller!



by:

All Good



by:

Perfect fit and fast delivery.



by:

Works as should



by:


9
9

See what our Experts say about this Valterra RV Waste Valves

  • Replacement 1-1/2" and 3" Valterra Bladex RV Waste Valves With Threaded Shafts
    Yes, if you were to remove the hub and spigot from the Valterra Bladex Waste Valve # T40NH you would be left with a Valterra Bladex Waste Valve Body # T1003DSPB with the threaded shaft rather than a drilled shaft. A better option may be to use the Valterra Bladex Waste Valve Body # T1003VP and just remove the handle that is threaded on. That will take care of the 3" valve you are needing. We have the 1-1/2" valve with the spigot and hub # T1001NH or like the other option I recommended...
    view full answer...

Info for this part was:

Employee Cole B
Installed by:
Cole B
Employee Amy B
Written by:
Amy B
Employee Wilson B
Updated by:
Wilson B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.