Video Transcript for Review of SnapPad RV Jack Pads - HiWay 10 Bus Jack Pads 10 Inch And 11-1/2 Inch Jack Foot - SP64FR74

Hi, everybody, Andy here with etrailer.com. And today, we're gonna take a look at these SnapPad HiWay 10 Bus jack pads. Now, these four heavy-duty rubber pads are going to snap onto your Class A motorhomes with HWH or valid leveling systems with two 10-inch in diameter and two 11.5-inch in diameter jack feet to make leveling faster and easier, eliminating the need to crawl under your motorhome to position plastic pads or wood blocks. Now, it is recommended to measure your jacks to confirm compatibility as the foot size or shape of the jacks on your leveling system can vary from model to model and year to year. Now, let me go ahead and give you some overall measurements of these pads. And so this pad is going to be for your 11.5-inch foot.

So I'm gonna go ahead and measure the diameter. So lemme see if I can line up my tape measure here real quick for you. So looking at the diameter of this bigger pad, as you can see, we are sitting right at 13 3/4 inches in diameter. And then laying this down, let me pull up my ruler here and give you the height. Well, you're sitting right at 2 1/4 inches tall.

And then looking at this pad for your 10-inch foot, lining this up to check the diameter. As you can see, we're sitting right at 11 and, I'm right at about 11 3/4 inches in diameter. And then the height, we're sitting right at two inches tall. Now, as you know, the increased surface area of your leveling jack's feet is going to give you added support for your motorhome, preventing sinking into soft ground, unlike smaller metal feet. Now, these pads are made here in the USA of durable, heavy-duty rubber that are actually made from recycled tires and they're going to grip uneven terrain and prevent your metal feet from rusting or vending.

The built-in drains are going to release moisture to prevent your jack feet from corroding, and they're also going to really serve as a cushion so your metal feet won't crack or chip away at your driveway and they're going to help dampen vibration from inside your motorhome that could cause shifting. Now, there's not going to be any need to remove and replace these pads or carry other jack pads or blocks around with you. These are going to be a simple one-time installation. You're just going to line up the pads beneath your jack feet and lower each foot until the lip of the pad fully engages and locks into place. You'll actually hear a snapping sound once the pad, is securely installed.

Now, installation is permanent, so once you have the SnapPad secured, you'll never have to worry about crawling under your RV to place pads again. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.