Video Transcript for Breaking Down the SeaSucker Hand Grip

Hello neighbors, Steve here with etrailer.com. Today we're looking at our SeaSucker Hand Grip, in vacuum mounted and black color. So folks, this nice portable hand grip will give you nice leverage wherever you need it. It's gonna be great for either steadying yourself, when either getting on or off the boat, or maybe put it inside of an enclosed trailer, help you get up inside, maybe if you're going inside door, who knows You got a nice 6 inch wide vacuum seal here. Comes with a nice hard plastic cover. You wanna make sure you're covering this when not used to keep dirt, debris, and keep it from getting scratched or nicked on the edges and stuff because again, it's sucking out the air in here, vacuuming out the air, so it needs to be able to do that.

It simply attaches and removes in seconds with the plunger here and the removable tabs here on the side, there's one there, one there. I know it's kind of hard to see since they're black rubber, but there you go. One on each side. You simply put it on a non-porous surface such as metal, glass, fiberglass. Pump this up until the orange indicator here disappears and that will show you that all the air's been vacuumed out.

There we go. Once that is achieved, you have the vacuum and that guy is not going anywhere. 210 pool pounds of force folks, holding that. So again, 210 pounds of force holding in place. Again, those tabs I mentioned, you simply push on that to the side and that will release and let air back inside underneath and then help release and get it back off.

Lemme spin this around, get the other side. And sometimes it's harder than others to get it off. There we go, especially with this big 6 inch one. So again, it does hold on nice and tight like you saw. It's a good thing.

That's what we want right Now before I give you some dimensions, I do wanna point out there is some lubricant that's sold separately. I highly recommend you get that. That is simply going to lubricate the plunger here. It's gonna keep everything inside of there nice and clean. It's gonna keep debris and dirt out. It's a waterproof lubricant gel. Again, that's sold separately. I'll put that item number on the screen for you. As far as some dimensions, overall the handle's about 6 and a 1/2 inch wide, about 5 inches tall on the tallest point. It is 3/4 of an inch thick, depending on which side you go from it's the same. And the distance from the surface, from here to the outside, I was getting right at 2 and a 1/2 inches overall. Well folks that will wrap it up for our look at the SeaSucker Hand Grip vacuum out in black color. I'm Steven. Thanks so much for your time. Thanks for watching and stay safe out there.