See what our Experts say about this Inno Accessories and Parts

• Will the Thule Rapid 400XT Foot Pack Work on a 2009 Toyota Matrix
  I do have an option for you but I spoke to my contact at Thule and they said that the Thule Rapid 400XT Foot Pack that you have cannot be reused on your 2009 Toyota Matrix because the fit kits are no longer available. Therefore, if you wanted to reuse your crossbars you would need both the Thule Rapid Traverse Roof-Rack Foot Pack part # TH480R and the Thule Roof-Rack Fit Kit for Traverse Foot Packs part # THKIT1512.
  view full answer...
  
• Recommended Roof Rack Options For 2009 Toyota Matrix With Fixed Mounting Points
  For your 2009 Toyota Matrix the only style roof rack system is the clamp on style rather than bolting to fixed mounting points. I would recommned the Inno roof rack system with square bars that clamp securely to your roof. The # INB107 crossbars are mated with the # INSUT feet and # INK244 fit kit, and install easily. The square bars are heavy duty and work with most accessories. You might also consider the Inno # INXB108-2, with # INXS250 feet, and # INK244 fit kit for a roof rack with...
  view full answer...
• Roof Rack Option for 2010 Pontiac Vibe
  So it sounds like you are looking for a roof rack for your 2010 Pontiac Vibe where part of it is attached to the fixed mounting points and the other is a clip-on option. While we do have a nice rack option, there isn't a good option for that because of the types of roof racks available for this vehicle. The best available rack option is a from Inno and it uses bars that go past the rack's feet, and uses a fit kit to clamp on, which is made up of the following parts: - Inno Aero Crossbars...
  view full answer...
• Roof Rack Recommendation for a 2001 Toyota RAV4
  The SportRack roof rack # SR1002 is listed as a fit for your 2001 Toyota RAV4 with naked roof but it does not use those fixed mounting points. It is actually a semi-custom roof rack and would not offer the best fit so I would not recommend it over a true custom fit option. The most cost-effective, true custom fit roof rack for your RAV4 is from Inno using bars # INB117, feet # INSUT, and fit kit # INK244. It does not use those mounting points on your roof either. This rack will be a much...
  view full answer...
  
• Will the Inno Feet for Square Crossbars Fit My 2009 Pontiac Vibe?
  I have a solution for you. Unfortunately, the Inno Feet for Square Crossbars # INXP will not fit your naked roof with fixed mounting points on your 2009 Pontiac Vibe. Although, I did confirm with Rhino-Rack that they do have crossbars that are compatible with your vehicle's rails. For the Rhino-Rack setup, you will need: - Inno Square Crossbars - Steel - Black - 42" Long - Qty 2 # INB107 - Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4 # INSUT - Custom Fit Kit for Inno XS200,...
  view full answer...
• What do Roof Rack Feet do for Inno Roof Rack on 2010 Pontiac Vibe With Naked Roof
  It sounds like you are asking the purpose of the "feet" of the Inno roof rack that fits your 2010 Pontiac Vibe. What the feet do is act as a base for the crossbars, and an attachment point for the fit kit. So what you will do is attach the fit kit to the feet, with the fit kit being what allows the rack to clamp to your door sills; then the crossbars will attach to the feet. Essentially, the feet of a roof rack act as something of an anchor for the crossbars so you can mount them. The...
  view full answer...
• Recommended Crossbars for a 2003 Toyota RAV4
  Yes, for your 2003 Toyota RAV4 I'd recommend checking out the Inno Aero Crossbars # INXB115-2, with the Inno Through Feet for Aero Crossbars # INXS250, and the Custom Fit Kit # INK244. These crossbars measure 45" long, 3 1/8" wide, 1 1/8" tall, and have a maximum dynamic weight capacity of 165 lbs. This system is designed to be used with a naked roof, which is what I assume you have but If you have factory rails already then you'd want the Inno Aero Crossbars # INXB123-2 with the feet...
  view full answer...
• Roof Rack Recommendation for a 2010 Toyota Matrix
  For your 2010 Toyota Matrix I have a solution for you, but a rack from a 2014 Corolla would not be it. The best priced system that would work great is the Inno part # INXB85-2, # INXS200, and # INK244 which is a confirmed fit. This will give you an OEM looking roof rack as the bars of the system do not extend past the feet.
  view full answer...