To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These brackets provide the necessary attachment points for Detail K2 Rampage II, Storm II, and Summit II snowplows. Designed to fit close to your vehicle without protruding out beyond the bumper.
Features:
California residents: click here
It fit nice
Fast, accurate ordering, timely delivery and Kim stayed on top of the order through delivery.
Excellent customer service!!!!!
Great Plow Mount. Easy to put on.
Worked great.
The plow and worm drive work excellent. The plow markers are pathetically inadequate and broke on my second plow. Bought Meyers plow markers ( braided cable, rubber encased) 50 times better than the plastic straws given with the plow. Other than that......happy
Nice. Overall . Shipping to set up , impressive. Thank u
Installed on my 2008 jeep rubicon unlimited jk
Hangs to low on truck
This is so you don't have to cut the front skirt. Would better to cut n get ground clearance
It’s not feet’s for Jeeps Gladiator 202 1!!
Expensive, only one bolt hole lines up on my F150. Had to use squarish hole in the forward facing tang. Took some wrangling. Had to mount plow before tightening bolts to keep alignment. So I ask how custom is this. It works though and the plow is great.
I Went to a body shop to get the brackets installed. I could not get to the bolt area. They did it in 1/2 hour , took front bumper and fender off. I assembled plow and attached it. Have used it for 2 big snow storms and am happy with it.
I've had this plow for over a year and still haven't had the opportunity to use it yet ( No Snow ) , assembly was easy enough for one person, like the wheels on the blade had to drill out the holes a little to get the pins to go in , and the stand in the back had to be cut off to keep it from hitting the back of the bumper and not going all the way down. Other than a few minor modifications seems well built.
I love my Detail K2 Summit II
plow. I have it on a 2000 Jeep Wrangler and it handles it very well. Mounting brackets are very easy to install.
These brackets were a pretty rough install on my 1998 Grand Cherokee. Before you crawl under your Jeep make sure you take these to the grinder and knock some of the powder coat off of the pins that go into the frame rails, otherwise no amount of hammering will get them in there. Other than that, they seem to be holding up pretty well and I am plowing on an uneven dirt driveway. The whole plow system has taken a decent amount of abuse so far.
Brackets work fine for old model YJ Jeep. Frame bolts need to be longer to bolt bracket to Jeep.
In mid-January, I received the plow kit about a week after the biggest snowfall of the year, a lot of which is still on the ground a month later. So it was not for another two weeks that a dusting came in where I could try it out. Worked okay, but not enough snow to really tell. So a couple of weeks later, mid-February, we were to get another "dusting" so I did not bother to hook up the plow. Next morning there was about 4" on the ground and more coming in sideways. After shoveling a small area to move the plow into place I was able to hook it up in a couple of minutes. I share a driveway with my neighbor so it is about three cars wide and the top of it is street level the bottom is at basement floor level with a 40 degree hill separating the two. I have the blade mounted on a 1994 Grand Cherokee sitting on Wrangler Radials. In four swipes I had 90% of it done and off to the sides. The rest was minor cleanup with a shovel. Then I took it to my office where I have a parking lot about 60 feet by 150 feet. After that big snow storm noted earlier I used a snow blower for about an hour to get maybe 1/3 of it cleared. The Jeep and plow blade had that sucker cleared down to the pavement in about 10 minutes. Should have had one of these years ago.
We purchased the DK2 Rampage II snowplow in Nov.2015, and started using it in Oct. 2016. Now it's been a little over a year, and the snow plow stopped working. After careful inspection, we found out the winch installed in the plow is an used+defective one (inside screws and rubber washer are not in place). It would be great if all parts are new and without defect.
What's worse, we tried to call the 1-800 on the instruction manual for ordering a replacement part, but never got any human being to answer the phone after trying for a week. Finally we found the phone # of the seller - etrailer from my old email folder.
It would be more convenient if you could have placed your phone # on the manual so that customers can easily contact you in case of any problem.
Thank you for listening.
The plow is still working good going into the second season. The blade itself is rusting quite a bit from all the salt on the roads etc., so probably going to have to apply a rust inhibitor spray paint to it.Also on my truck (Toyota Tacoma) the blade sits low enough that the snow sprays over the top of the blade and onto the windshield. I go through quite a bit of de-icer to see where I am plowing. Also would recommend getting some mounted lights above the blade. It is not too bad when I am plowing, but when I am driving at night with the plow blade up, I have to lower it far enough so that I can get a least 1/3 of the headlights to project over the blade to see. If you lower it too much and end up hitting a pothole doing 50 mph that could be a problem. All in all a great plow for the price, just make sure to get some add-ons to make it easier to use.
Works great plows like a 1ton with a 6 k plow on it. Fast shipping easy assembly. Couldn't be happier
It is nice having a plow for our driveway! I was able to hook it up to my Tundra myself, but be aware it needs a custom mount kit for whatever your vehicle. I can hook it up in about 20 minutes. It would be easier if I had room to store the plow in the garage and had a flat surface. My Detail K2 is simple but functional and worked great for one winter in Fairbanks, Alaska, and I'm about to uncover it for another season.
Awesome product
Parts fit as specified, good quality, timely delivery.
Thank you etrailer for sourcing a hard to obtain part in a timely manor.
Do you have a question about this Snow Plow?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.