ARC Concept Custom LED Pod Lights - Auxiliary High Beam - 40 Watts - 3" Round - Qty 2

Video Transcript for Review of ARC Off Road Lights - Concept Custom LED Auxiliary High Beam Pod Light - ARC89RR

Hi everybody, Andy here with etrailer.com. And today we're gonna take a look at these Arc Concept custom LED auxiliary high beam pod lights. With these custom fit auxiliary LED high beam pod lights, you can replace your current fog lights for the street legal 3,000 lumens of focused light that these lights will provide for you for improved visibility and safety. The high-quality light output comes from four five-watt Osram Olson LEDs in each light, giving you a total light output of 3,000 lumens with 1,500 lumens per light. As you can see, I have these lights already connected to power and turned on. Even with my studio lights on, you can see just how bright they are.

But I think a better demonstration of just how bright these are and the effectiveness of them, I'm gonna turn the studio lights off, and go to a wide view here and take one of these lights and shine this on the wall behind me, to show you that these lights do have a 30-degree narrow beam that is created by total internal reflection or TIR projector lenses. And these street legal pods are SAE J581 certified for use on all roadways. However, you will still want to review your state's guidelines regarding the use of auxiliary lighting on the roadways. So this is high, these lights are gonna produce high-quality bright white light, and you get an idea of what that beam is gonna be like, that is going to disperse and really increase your visibility. So I'm gonna go ahead and turn my lights back on here.

Turn the power off, so I don't continue to blind you. I just wanna talk a little bit about the housing of these lights. These lights feature a black powder coded aluminum housing, and the brackets that I already have installed on these lights, they also have the same black powder coated coating on them. And of course everything here is going to be corrosion resistant. These are IP67-rated to protect against dust and moisture.

And this is going to be a simple insulation into your vehicle's factory fog lamp housing. And each lamp is going to plug into the your existing fog light connector, so this is gonna be a very easy install. And you're going to get two different adapters to make sure that this is going to work for your application. And these will work on your existing fog lamp on and off switch. Now, just to give you some overall measurements, the face diameter itself is three inches and the overall width, including the brackets, we're sitting right at about 4 1/2 inches wide.

And the overall height we are sitting right at about 3 3/4 quarters inches tall. And the overall depth we are sitting right at two and, about 2 5/8 inches deep. And those mounting holes center to center, we're sitting right at two inches. Now this includes everything that you see here on the table before me, you're gonna get two round LED pod lights. You're gonna get the two type A fog light brackets, again that I already have installed on each of these lights. You're gonna get two H11 adapters, and then two 5202 PSX24W adapters whichever is going to work best for your application. You're gonna get the mounting hardware for the brackets with the included Allen wrenches. And then just some other information that you might find helpful, the wattage is 20 watts at 13.6 volts DC, so that would be five watts per LED. The current is 1.5 amps at 13.6 volts DC. And the voltage is 10 to 36 volts DC. The power draw at 1.5 amps per light. You will get an instruction sheet highlighting everything that you get, and going over each piece that you get in this kit. And overall, I think this is gonna be a great replacement for your fog lamps, if you're looking for a high beam, auxiliary high beam option over the fog lamps. I think these are going to serve you very well. They're very well constructed, so I think they're going to, not only be able to resist the elements, but provide that light that you're looking for. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..