You can't see what is behind your UTV, so riding in groups or on trails creates blind spots. This 10" wide convex mirror mounts to your roll cage and expands your rear view, so you can see riders and obstacles behind you while moving.
Riding without a rearview mirror leaves you unaware of riders, vehicles, or obstacles behind your UTV. This mirror uses a wide-angle convex design across a 10" wide surface to expand what you can see behind you. You can track movement and maintain awareness of what is following you while riding.
Rough trails can cause mirrors to shake and distort what you see behind you. This mirror uses a ball and socket joint that holds position while reducing vibration during use. You can keep a usable rear view even when driving over uneven ground.
Loose mounts shift or slip when riding over bumps and rough terrain. This mirror uses a clamshell mounting clamp that wraps around roll-cage bars for a stable hold. You can ride without the mirror moving out of position during use.
Fixed mirrors do not align with different seating positions or driver preferences. This mirror includes an adjustable mirror head that can be repositioned as needed. You can set the angle to match your line of sight and maintain a consistent rear view while riding.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer. Today we're gonna take a look at the CIPA Deluxe 10-inch wide UTV Rearview Mirror. Now if you want a better view behind you while you're out riding in your ATV, this mirror here is gonna give you a nice wide clear look at what's going on, helping to cut down on any blind spots. As we mentioned, it's 10-inches wide. Now the UTV rearview mirror will mount easily to your roll cage bar to improve rear visibility and increase safety. It is a complete kit.
It will include the mirror assembly, the clamp screw, the Allen wrench, the clamp spacers, and protective tape strips. Now this is a nice wide-angle convex mirror designed to help reduce blind spots and expand the field of view. It has a nice ball-and-socket joint in the back here, allows adjustable positioning while reducing vibration during any use. And what's nice is there's a little Allen screw there. You can use the included Allen wrench to loosen that to adjust it, and then if you want to turn it and tighten it down to keep it in that position.
Now this uses a clamshell mounting clamp that'll fit securely around the roll cage bars for stable installation. Now it will fit roll cage bars from 1 1/2 inches all the way up to 1 3/4 inches in diameter. And basically, if you don't put the spacers in there, that's where it'll fit the largest 1 3/4 inch diameter. What you'll do is take the protective tape here, put one here, put the other one right up on the other part of the clamp. Then when you put that down around the bar, take your screw, put it in there and tighten it down.
Now again, if you're gonna put it on a smaller bar, like a 1 1/2-inch bar, then you can put the spacer in there, put the tape on that. Same way, spacer in here, tape on that. And then when you close it, tighten it down again with the screw and the Allen wrench, so it's adjustable. It is made of a reinforced composite construction. Provides strength and durability for off-road conditions.
Again, dimensions on this 10 inches in width, and widest point is about 3 1/2-inches tall. But that is gonna do it for our look at the CIPA Deluxe 10-inch wide UTV Rearview Mirror.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.