Product Experts Available Now!
Call 1-800-940-8924
THIS ITEM IS NOT A FIT FOR
2025 Ram ProMaster 2500
We'll connect you with nearby partnered installers who know this exact setup.
Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Silver - 500 lbs
Part Number: A4000955
In Stock
$715.50
Retail:$795.00
You Save: $79.50
2025 Ram ProMaster 2500
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
We'll connect you with nearby partnered installers who know this exact setup.
- All Info
- Reviews (55)
- Q & A (0)
- Photos
Adarac Ladder Racks - A4000955
Highlights
- Custom Fit for Your Vehicle: Installs with hardware that attaches to your truck's bed rails or stake pockets
- Handles Heavy Loads: 500-lb capacity (250 lb per bar) supports ladders, lumber, and gear.
- Tonneau Cover Friendly: Works with most inside-the-rail covers for full cargo access.
- Adjustable Uprights: Slide or remove supports to fit load size or clear tall items.
- Quick No-Drill Install: Foam-padded rails mount using stake-pocket inserts and hardware.
- Rustproof Aluminum Build: Lightweight anodized finish resists corrosion and wear.
Features to know about
Haul Work or Weekend Gear: Carries Up To 500 lbs
The Adarac Pro Series aluminum rack gives you 500 lbs of carrying capacity, with 250 lbs per bar. It’s built for long loads like ladders, lumber, or piping during the week, and just as ready for kayaks, skis, or boards when the weekend hits. The over-cab height design keeps everything secure and out of the bed so you can still use all that space for tools or camping gear.
Keep Your Bed Covered: Works With Inside-the-Rail Tonneau Covers
This rack is designed to work with most inside-the-rail tonneau covers, including Lomax hard tri-fold and Access roll-up styles. The uprights mount to the stake pockets on top of your bed rails, so the cover’s operation isn’t affected. You can keep your gear dry and your rack loaded without removing or adjusting your cover.
Mount Accessories Anywhere: Slotted Crossbars and Utility Rails
Each square crossbar has built-in mounting channels on the top and bottom, so you can add tie-downs or other gear exactly where you need them. The removable rubber strip exposes the top channels for more mounting options. Utility rails also have channels for adding accessories, and optional load stops help keep your haul from shifting in transit.
Rustproof Strength: Extruded Anodized Aluminum Construction
Made from rustproof aluminum, the framework is light but tough. The extruded anodized finish on the crossbars and rails adds extra protection from corrosion and weather wear, while keeping the rack looking clean. Foam-padded utility rails protect your truck’s bed rails during installation, and angled uprights keep your rear view clear.
Quick Setup and Adjustments: No-Drill Installation
Installation is simple—no drilling required. The aluminum stake pocket inserts and included hardware secure the utility rails to your truck, and the uprights can be repositioned or removed to match your load size. That makes it easy to haul long materials one day and open up the bed for taller cargo the next.
Specs
Weight and Capacity
- Carrying capacity: 500 lbs (250 lbs per bar)
- Load stop maximum capacity: 100 lbs per load stop
Dimensions
- Crossbar dimensions: 72" long x 1-1/2" wide
Warranty
- Limited 1-year warranty
F2010031 ACI Adarac Pro Series Custom Truck Bed Rack - Aluminum - 500 lbs
Replaces Adarac 4000955
This Product Fits The Following Vehicles
- 2008 - 2016 Ford F-250 Super Duty 6-3/4 Foot Bed
- 2008 - 2016 Ford F-350 Super Duty 6-3/4 Foot Bed
Ratings & Reviews
4.7
55 reviews
by:
Andy
08/10/2022
Rack was just what I was looking for. Pretty easy to install.
by:
Matt
09/09/2021
by:
Patrick
11/01/2025
2022
Ford
F-150
Overall good product, works with my trifold tonneau cover, I do wish it had some sort of cover for the stake pocket where the upright bolts in. I wish I came with additional channel nuts as well for bolting onto the crossbars
by:
Marc
05/10/2024
2023
Ford
F-150
I have had the rack installed for about six weeks. After a few trips on everything from highways to gravel and dirt roads it has been very solid. We have a fly fishing rod case mounted on it and it's solid. I think there is a little wind noise but not much. Easy to install, lots of good paper instructions as well as videos on line. Next trip will have our canoe mounted on top.
by:
Rob
07/01/2025
2022
Jeep
Gladiator
I bought this rack believing installation did not require drilling. That may be true for installation on many vehicles, but does require drilling to install on a Jeep Gladiator. Special instructions that come with the rack are quite clear on this for both a Jeep Gladiator and a Toyota Tacoma up to 2023.
A 2nd issue came up while following the instructions. They call for torquing the self threading bold to 85 in/lbs. When I hit 60 in/lbs, the self threading bolts started stripping out the holes. I fixed this using 6 nuts to hold the self threading bolts from underneath. Tight clearances made this a tougher job than it should have been.
To anticipate questions, yes I was using a torque wrench calibrated in inch pounds and not foot pounds. Yes I used the proper drill size and did not wobble the holes larger. I believe that at least for Jeep Gladiator, the kit should include nuts for the hold down bolts. Can't comment on the Toyota Tacoma - but be prepared.
I will say that once installed, the rack looks to be a quality item and I am otherwise satisfied with it. If not for the unexpected installation hassles, I would rate the rack as 5 stars.
A 2nd issue came up while following the instructions. They call for torquing the self threading bold to 85 in/lbs. When I hit 60 in/lbs, the self threading bolts started stripping out the holes. I fixed this using 6 nuts to hold the self threading bolts from underneath. Tight clearances made this a tougher job than it should have been.
To anticipate questions, yes I was using a torque wrench calibrated in inch pounds and not foot pounds. Yes I used the proper drill size and did not wobble the holes larger. I believe that at least for Jeep Gladiator, the kit should include nuts for the hold down bolts. Can't comment on the Toyota Tacoma - but be prepared.
I will say that once installed, the rack looks to be a quality item and I am otherwise satisfied with it. If not for the unexpected installation hassles, I would rate the rack as 5 stars.
by:
Michael
09/25/2026
Adarac pro was as advertised and assembly went well. Looks good on the truck. Delivery was ahead of schedule.
Always good doing business with etrailer
Always good doing business with etrailer
by:
Gary
04/20/2022
I had delayed trying to get ladder racks because I wasn't sure whether it would work with my bed cover. I was able to locate the correct model online and verify my findings and order on the phone Rodney was helpful and friendly.
Gary W.
4/21/2023
Great. The rack looks good and is very stable
by:
Ken
08/24/2020
2020
Ford
F-150
Packaged delivered in good shape. The rack was very well made. It was easy to install. Very sturdy and should hold up well. The Pro model worked with my Bak-flip Tonneau Cover. I would highly recommend this product. I have used etrailer for years and they always come thru.
Kenneth S.
8/20/2021
It works great with my bakflip hard cover
by:
Tran
06/22/2021
I love my Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - Matte Black - 500 lbs. I found it easy to install by myself—including cutting the deck plastic trim to expose my stake covers. Its black finish complements my truck. Best of all, it enables my BAK Industries tonneau cover, Revolver X2, to maintain is full functionality. My only recommendation would be to include more foam strips. They are intended to fill the gaps between the end of the grooves on the plastic trim to the end of the rail. There was enough for one strip of foam on each end rather than two (one on each side of the rail) on each end of the rails.
by:
Russell
08/27/2026
Looks like the rack will work out good for hauling canoes and kayaks and such. Appears well made, and installed pretty easily.
by:
Richard
04/13/2021
2020
Jeep
Gladiator
Took a couple of hours to install. One on the few you can use with hard tri-fold bed cover. Going to add side bars for off-road tools.
by:
Oleg
10/14/2022
I have had this rack for one year. So far, so good. It looks great, way better than other models I see around. Do not rust; sturdy enough. Works well with trunk cover. Installation is a bit tricky, but any handyman can do it alone in a couple of hours. Good purchase overall
by:
Matt
06/18/2025
2025
Ford
Ranger
After 90 minute install, it feels sturdy and looks great. Ford ranger 2025, no cutting or drilling required. I like the fact that it has some rubber strips on top, should work well for carrying a kayak. Will need to unscrew antenna if carrying something in middle over roof.
Gwendolyn Y.
6/20/2025
Happy to hear that you love the rack, Matt! When do you get to use it to carry your kayaks to the water?
by:
Donald P.
11/24/2025
Package arrived on time I have been out of town for a few weeks so just put it together today
It fit perfectly I think it looks good will mount kayaks on it and see if it works
I am well pleased so far
It fit perfectly I think it looks good will mount kayaks on it and see if it works
I am well pleased so far
by:
Jose A
03/10/2025
2022
Jeep
Gladiator
Clean, sleek look. Easy to install!
Gwendolyn Y.
3/11/2025
Looks great on your Gladiator, Jose! What are you going to put on the rack?
by:
Mark
06/25/2025
The ladder rack is great. Fits over my tonneau cover. And carries everything I put up there.
by:
Sergio
09/07/2022
I really like the aesthetics of the ladder rack and functionality. Its sturdy, durable and looks slick !
by:
John t
04/14/2019
Works great with the backflip hard cover.
Should have some predrilled hole to attach tie down straps.
Should have some predrilled hole to attach tie down straps.
Jack T.
4/15/2020
Great
by:
Lawrence
07/16/2021
Ford
F-150
I bought this ladder rack because I needed something that would attach to the stake pockets of my f-150 because I have a bed cover. Everything else I found had to hook around the side of the truck bed. Installation was easy. The only issue I had was the forward stake holes didn't have a removable cover. I had to cut a hole in each side.I use them to carry my kayaks when I go camping. They work great for that and carrying anything that won't fit in the bed.
by:
William
04/21/2023
Love this ladder rack...it works great with my tauneau cover, Iuse it to transport our Kayaks when we go camping and it is great to still be able to use my bed with the tauneau cover on to protect our gear in inclimate weather. I would absolutely buy it again. Thanks.
by:
Myron
02/12/2021
This rack is very solid and travels well.
I have had no problems but I should say I have used it lightly.
I have had no problems but I should say I have used it lightly.
Myron
2/13/2022
I have traveled with kayaks at highway speeds from Wisconsin to Texasthree times with two kayaks and have no problems.
by:
Paul
01/12/2021
2020
Chevrolet
Silverado 2500
Box came open at one end and slightly open at the other. I was nervous thinking that the hardware bag and two additional accessories that I ordered might be missing. Upon opening the box everything was there and well packaged. The only issue I had was one of the vertical supports that has two laser cut holes didn't have one of the holes completely cut. 3/4 of the cut was made. I punched a starter hole in the center and drilled it out and finished the install. Overall great rack for carting around the canoe or lumber longer than the pickup bed. One other thing. They need to debur the edges of the aluminum pieces otherwise they are very sharp.
25
55
true
Show More Reviews
See what our Experts say about this Adarac Ladder Racks
- What Ladder Rack Is Compatible With The BAKFlip MX4 Tonneau Cover?Hello Nic. The only ladder rack we know to be compatible with the BAKFlip MX4 is the Adarac Pro Series Custom Truck Bed Ladder Rack. If you can tell me the year, make, model and bed length of your truck I am happy to check and see if this rack is offered for your vehicle. This ladder rack has a rectangular heavy-duty crossbar which will allow you to mount a kayak carrier such as the etrailer J-Style Carrier # e98878.
view full answer... - Adarac Pro Ladder Rack Compatibility with BAKFlip Hard Folding Tonneau CoverFor your 2015 Ford F-250, the BAKFlip folding hard tonneau covers will work well and there are 4 options to choose from. There is the BAKFlip G2 Hard Tonneau Cover # BAK26310, FiberMax # BAK126310, F1 # BAK72310, or MX4 # BAK48310. Each of these options are confirmed to fit your truck and each is also compatible with the Adarac Pro Series Custom Truck Bed Ladder Rack # A4000955. The tonneau covers will utilize interior bed rails and the ladder rack will utilize the stake pocket holes,...
view full answer... - Adarac Pro Series Ladder Rack for a 2018 Ram 2500 Long Bed and BAKFlip Tonneau CoverThe Adarac Pro Series Custom Truck Bed Ladder Rack # A69FR is what you want for your 2018 Ram 2500 with the 8' bed. This is compatible with your BAKFlip cover whether you have the F1 # BAK72204, G2 # BAK26204, or the MX4 # BAK48204. I also recommend checking out the Tie-Down Kit # A4000882, as well as the Load Stop Kit # A4000880 . The Pro Series part # A4000955 that you referenced is actually designed for Ford Super Duty pickups with a short bed so you don't want to go with that.
view full answer... - Adarac Pro Series Ladder Rack Compatibility with BAKFlip 4 Tonneau Cover on 2017 Ram 2500The Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs # A4000955 is the fit for certain Ford models. You will instead want # A49FR for a 6-1/2 foot bed or # A69FR for an 8 foot bed on your 2017 Ram 2500. The Adarac Pro Series Custom Truck Bed Ladder Rack will work well with your BAKFlip 4 tonneau cover.
view full answer... - Black Ladder Rack that Fits 2016 Ford F-150 5.5 ft Bed with BAKFlip G2I can check and see, but I'll need your truck info to see what is a fit. What's year/make/model and bed length of your truck?
view full answer... - Over the Truck Bed Kayak Carrier Compatible with BAKFlip MX4 for 2018 Ford F-150I have a solution for you, but because the BAKFlip MX4 # BAK48329 is a folding hard tonneau cover, you don't really have options as much as a single solution. The only ladder rack that we have confirmed for use with the MX4 is the Adarac Pro Series # A4000955 that you were looking at, since the uprights on the Adarac are not tilted inwards like they are on many other ladder racks. The Adarac Pro Series has a 500-lbs capacity and will allow you to carry your kayaks on the crossbars of the...
view full answer... - Can I Use an EIDE Boat Loader with the Adarac Pro # A4000955 on My 2011 Ford F-250? As far as the compatibility of an automatic EIDE boat loader with the Adarac Pro Series # A4000955, we have not tested the mechanics of the loader with the Adarac. We also unfortunately do not have the specs/measurements of the EIDE boat loader because it is not a product that we carry. As far as the height of the Adarac system on your truck, I confirmed with the manufacturer that the ladder rack adds 24 inches of height from the top of your truck bed's cap rails to the top of the crossbar....
view full answer... - Bed Rack Compatible With A Backflip MX4 Tonneau Cover On A 2017 Ford F-150 With 5-1/2ft BedThe only rack compatible with the BAKFlip MX4 Hard Tonneau Cover - Folding - Aluminum - Matte Finish Item # BAK48329 on your 2017 Ford F-150 is the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500 lbs Item # A4000955. This rack has a 500lb weight capacity and works with skis, snowboards, canoes, kayaks, surfboards, and other recreational gear. Each cross bar has a channel to accept different accessories like load stops Item #A4000880 and tie downs Item #A4000882. The rear...
view full answer... - Recommended Ladder Rack For A 2016 Ford F-250 Super Duty 6-3/4 Bed With BAKFlip 4 Tonneau CoverFor your 2016 Ford F-250 Super Duty with a 6-3/4' bed and BAKFlip 4 tonneau cover # BAK48310 I recommend the Adarac Pro Series Custom Truck Bed Ladder Rack - Aluminum - 500lbs # A4000955. This ladder rack mounts to the stake-pockets of your bedrails instead of clamping to the inner lip to allow you to retain use of your tonneau cover. This rack allows you to carry ladders, lumber, piping, and recreational gear with ease. The posts can easily be adjusted forward to accommodate shorter length...
view full answer... - Correct Ladder Rack for 2016 Ford F-350 with BAKFlip MX4 Hard Tonneau CoverThe Adarac Truck Bed Ladder Rack you will need to use on a 2016 Ford F-350 with BAKFlip MX4 Hard Tonneau Cover is the Pro Series part # A4000966 for 8' beds or part # A4000955 for a 6-3/4' beds. These work on both SRW and DRW models. The reason you must use the Pro Series is because the uprights are straight so you can fold the panels back without issue.
view full answer... - Ladder Rack for 2013 Ford F-350 With BakFlip Tonneau CoverThe MaxxTow MaxxHaul Over-The-Cab Truck Bed Ladder Rack MT70232 mounts to the top and the inside of the bed rails so it would interfere with any of the BAKFlip covers. However I do have a solution for you to have a ladder rack and your BakFlip cover. There are several BAKFlip covers for your 2013 Ford F-350 the BAKFlip G2 Hard # BAK26310, the BAKFlip F1 # BAK72310, the BAKFlip FiberMax # BAK126310 and the BAKFlip MX4 # BAK48310. All of these covers mount to the inside of the bed rails...
view full answer... - Ladder Rack for 2018 Chevy Silverado 1500 5 ft 9 in Bed with BAK BAKflip MX4 Tonneau CoverWe do offer ladder racks that will fit with tonneau covers that attach to the inner edge of the bed side rails like the # BAK48120 BAKflip MX4. The best option is the Adarac ladder rack, because it features uprights that are perpendicular to the bed sides, and will not interfere with your ability to fully open the tonneau cover so it's folded against the rear of the truck cab. For your 2018 Chey Silverado 1500 with the 5 foot 9 inch bed (which everybody refers to as the '5-1/2 foot...
view full answer... - Adarac Pro Series Ladder Rack for a 2020 Ford F-150 with a 5-1/2 Foot BedWe have an Adarac Pro Series for your 2020 Ford F-150! The part number that you referenced, # A4000955, does not fit your truck because this is the model that is specifically built for 6-3/4 foot beds, while yours is a 5-1/2 foot bed. The model for your truck is # A4000964. It's the Pro Series and features everything the other model does with the exception that it is shorter (being built for shorter beds). It will work with most inside-rail tonneau covers like the BackFlip MX4, part #...
view full answer... - Recommended Truck Bed Rack For 2015 Ford F-250 Super Duty with 6-3/4' BedI have a solution for you, but there is not a rail that will allow you to connect the Yakima Outpost truck bed rack to a tonneau cover that is not the Retrax XR tonneau cover. Instead, I recommend looking into the Adarac Custom Truck Bed Ladder Rack - Steel with Aluminum Crossbars # A70611. This will work with any retractable or soft tonneau cover that is mounted inside the bed rails but will NOT work with folding covers. This attaches to the top of the bed rail on your 2015 Ford F-250...
view full answer... - Ladder Rack that Has Adjustable Upright Position for For Ford Truck with 6-3/4 Foot Long BedWe have sliding upright ladder racks that would be more ideal for what you are wanting but the Adarac Pro that you referenced does not have the ability to do that. For that you'd want the Thule TracRac SR part # TH43003XT-510 which should fit the same truck you have. It fits: 1999 - 2014 Ford F-250 and F-350 Super Duty 6-3/4 Foot Bed 2015 - 2016 Ford F-250 Super Duty 6-3/4 Foot Bed 2015 - 2016 Ford F-350 Super Duty 6-3/4 Foot Bed
view full answer... - Ladder Rack Recommendation for 2016 Ford F-250 Short Bed that Has BakFlip Tonneau Cover InstalledSounds like you have a Bakflip tonneau cover installed on your 2016 Ford F-250 short bed and want to install a ladder rack that will fit the truck and still allow the tonneau to function. For that what you need is the Adarac Ladder Rack # A4000955 which works perfectly for this application. Since it installs on top of the bed rails it allows the tonneau to remain installed and function like it's supposed to.
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Installed by:
Hayden R
Installed by:
Adam E
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Alex H
Updated by:
Mark S
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Marc
5/11/2025
The rack works great. We’ve had the canoe on it. It’s solid. It has not needed any adjustments. The paint is holding up just fine. We’ve removed and reinstalled it twice with no problems. Very glad we got this one