Video Transcript for Review of etrailer Trailer Jack - e73VV

Hi, everyone. Steve here with etrailer.com. Today we're looking at this replacement Right or Street Side Leg for the etrailer Ram Hydraulic Jack Square Two Bolt-On Jacks. Now folks, this will replace, again, the right side, or what's called the street side of your square leg from etrailer or the Ram Hydraulic setups. Now, you will need in, conjunction with this, a hydraulic pump and power unit and a left leg assembly. Those are gonna be sold separately.

I'll put those item numbers on the screen for you there. Now this does work with a unit that will offer up to 3,200 PSI extension and 1500 PSI retraction pressures. So it's gonna bolt on using these nice brackets that you're gonna see right here. As you can see, they're pre-drill, which makes it a lot easier to line everything up, mark it, drill it, and then get this installed. You'll need bolts hardware, all that.

That's sold separately as well, or you can pick it up locally. These brackets are gonna be seven and a half inches long by four inches tall. And as you can see, there are two of them on the jack, top and bottom. You also have a nice foot plate, and that foot plate is pivotable. I've got some wedges in there to protect myself and keep this from falling over 'cause it's a very heavy heavy duty jack.

But that foot plate is 10 by 10 on the landing pad there, so it's gonna give you great stability and stuff whenever you're going up and down. As you can see, you've got your hydraulic line hookups here. You'd simply thread them on, again, with that power unit pump and the other side of the other jack. Everything here is four and a half by four and a half square tubing. Nice, heavy duty steel.

It's been powder coated black so you don't have to worry about rust and any of that kind of stuff, corrosion, anytime soon. Now the screw travel inside of this jack is 24 and one quarter inches of travel. The bracket height here, when everything is retracted like you see before you, we've got 34 and seven eighth inches. And then when it's fully extended up, 59 inches extended. The lift capacity is 12,000 pounds, while the support capacity is 15,000 pounds. Well, folks, I think that's gonna wrap it up for our quick look together. I do wanna thank you so much for your time. As always, please, we'd love to hear some feedback. Good, bad. Wat you like, what you don't like, what can we improve. Also, some photos of you on your rig once you've got it installed. Have a good one.