Features to know about

Direct Cooling for Non-Ducted RVs

In a non-ducted RV, cooled air does not travel through ceiling ductwork before reaching the cabin. It comes straight down through the ceiling assembly, so airflow at the unit matters. This Furrion Chill Cube gives you 18,000 Btu of cooling capacity and 340 CFM of airflow to help bring cabin temperatures down in the area where the AC is mounted.

Variable-Speed Cooling That Feels More Even

A traditional AC often cools hard, shuts off, then starts again once the cabin warms back up. That can leave your RV bouncing between too warm and too cold, especially during long cooling stretches. The variable-speed compressor adjusts output as conditions change, helping the system stay closer to the temperature you want instead of constantly cycling on and off. Because it does not have to repeatedly restart at full force, it also runs noticeably quieter than many traditional RV ACs, making it less distracting during TV time, conversation, or sleep.

Heat Pump Comfort for Mild Weather

Cool mornings and shoulder-season trips do not always call for firing up a furnace. This unit has a built-in 17,000 Btu heat pump that can provide electric warmth without using propane. In cooling mode, the system moves heat out of the RV. In heat pump mode, it reverses that process and pulls available heat from the outside air into the coach. It is useful for mild, cooler conditions, but it is not meant to replace your main furnace in cold weather.

Helps You Feel Less Sticky in Muggy Weather

Humid air can make an RV feel sticky and heavy, even after the temperature starts to drop. While it cools, this unit removes up to 1.8 pints of moisture per hour, helping reduce that damp, clammy feeling on your skin and making the cabin feel less muggy. That extra moisture removal helps the space feel more comfortable on humid camping days when cold air alone is not enough.

Runs on More Than Shore Power

You are not always plugged into a full-power campsite when the RV starts heating up. This Chill Cube is 2,000W generator or inverter ready, giving you more flexibility for campgrounds, travel stops, and off-grid setups when paired with the right power source. Battery saver modes also help manage power use when you are trying to stretch your available energy. This unit runs on 115V, 60Hz power, with 1,480 watts of cooling power consumption, 15.8 amps of cooling current draw, and 11.9 amps of heating current draw. Those numbers give you something concrete to compare against your RV electrical system, generator, inverter, or campsite power before installation.

Match It to the Right R32 Setup

This is the rooftop AC unit only, so it needs compatible Furrion R32 interior components to complete the installation. That may include the correct air distribution box, thermostat, and controls for your ducted or non-ducted layout. Because R32 systems are not backward compatible with Furrion AC systems from 2024 and earlier, confirm your interior components before swapping the unit in. If you're looking for a complete AC system, check out Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump - Non- Ducted - 18K Btu - White - R32 or Furrion Variable Speed Chill Cube RV Air Conditioner w/ Heat Pump - Non-Ducted - 18K Btu - Black- R32.

Installation Help When You Need It

Replacing a non-ducted rooftop AC means lifting the unit onto the RV, sealing the roof opening, and connecting it to the correct air distribution box and controls. Matching the rooftop unit to the right R32 Furrion components helps avoid fitment issues, but installation is still a job where the right help can make a difference. If you'd like help installing your air conditioner, check out our Installer Locator to find an installer near you.