Video Transcript for An In-Depth Look at the Arizona Chrome Logo Emblem 2" Hitch Cover

Today we're going to be taking a look at the Arizona two inch hitch cover from AMG. This hitch cover allows you to show your school pride. It's going to add a clean, finished look to your hitch and it's going to help keep dirt and grime out of the receiver tube of your hitch. The hitch cover is going to be made from a steel construction. It's going to feature a really nice black, powder-coated finish which is going to do a great job at resisting rust and corrosion. Here on the front, we're going to have a chrome plated metal emblem. The unit's got a really nice fade-proof and rust-proof design.

It is American made. Here on the back side we're going to have a foam gasket. That's really going to help reduce rattling between the hitch cover and the hitch. This is an officially licensed product. To get it fully installed it does require a hitch pin and clip or a hitch lock. Those items are sold separately, so if you're interested in one, you can find them right here at etrailer.com. The pin holes on this hitch cover will accept a standard five-eighths inch diameter pin. We're going to go over some measurements real quick, starting with the overall width here at the face.

It's going to be about five inches. Overall height, that's going to be about three and a half inches. The distance that we have from the back of that foam pad to the center of the hitch pin hole is going to be about two and a half inches. This is designed for a two inch by two inch trailer hitch receiver. Very simple installation, just slide it into the receiver tube of your hitch, push it in until you get your pin holes to line up with the pin holes in the receiver tube and then secure it using the hitch pin and clip or a hitch lock. That's going to do it for today's look at the Arizona two inch hitch cover from AMG..