10" Tall x 15" long stackable wheel cribs let you lift the front or rear of your vehicle for service or display. Separate cribs to lift your entire vehicle 5" off the ground. Replaces heavy jackstands. Fit tires up to 10" wide.
Features:
Specs:
Race Ramps Wheel Cribs are sturdy, solid foam blocks that serve as a tough, but lightweight and rustproof alternative to jackstands. When stacked, they keep the front or rear of your vehicle safely lifted 10" off the ground for service or display. This allows you to perform routine maintenance such as changing your oil, drive belt, or transmission fluid. Additionally, you can use the cribs for display. To use the wheel cribs, raise your vehicle high enough to slide a crib under each tire, then lower your vehicle. The tires will sit snugly in the precision-molded concave cutouts.
They can also be separated into 4 wheel cribs to lift your entire vehicle 5" off the ground.
These cribs are made of ultra-strong, solid core, high-density EPS foam that won't crack or bounce. Each crib supports 1,500 lbs - giving you a total weight capacity of 3,000 lbs for lifting a vehicle for service or display. The cribs are lightweight, weighing only 3 pounds per crib, so you can transport and store them with ease.
The cribs are covered with a textured coating and are flat on one side. This keeps them from skidding while your vehicle is lifted. The coating is a hybrid polyurea compound that is resistant to water and other automotive chemicals commonly found around the garage. And although this coating is durable, it will not scratch, mark, or scrape your garage floor or the ground.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors. Steve here with etrailer.com. Today we're looking at these Race Ramps Stackable Wheel Cribs for Service and Display. Folks, these stackable wheel cribs will provide you 10 inches of lift to either service or display your vehicle. And they do separate. That way, if you wanna lift your entire vehicle five inches off the ground, you could put all four of these flat on the ground, one under each wheel, and then that would give you five inches of lift all the way around the vehicle.
Now the good thing about these guys is they're gonna replace your cumbersome jack stands. As you can see, they're super lightweight. These guys weigh three pounds total. And just as it says on the back, they're rated at 1500 pounds per crib. So one set of two would give you 3000 pounds capacity.
And like I said, they're super light. They makes them easy to transport store out of the way. They're ultra, ultra strong. They're high density EPS foam, and that's gonna ensure durability and stability. Now they are also a solid core foam, so they're not gonna bounce, crack, any kind of stuff like that.
They do have a very nice texture coating. Let me zoom in and show you that here. So you can see, it's got this nice texture, nice grip. And that's gonna help you, you know, not slip or slide, whether it's the wheel on here or the ground, it's not gonna slide or anything. It also resists water and automotive fluids.
They just run right off of it. They also are pretty neat in that they have this grip, but they're not gonna scratch or mar your floor. It's pretty genius actually, the way they've designed them. They are made here in the USA. They do work with vehicles that have tires that are up to 10 inches wide. So if you we inchesre putting that on there. Now they do also work with tires and wheels with a overall diameter of between 24 and 30 inches. Now I wanna throw some dimensions here on the screen here. You can either pause it or if you're on the homepage already or of these of this product, you should be able to see that image on the page as well. Five inches tall, 10 inches when stacked, 12 inches wide by 15 long. And overall at the top curve on the outside edge stack, they're 11 and a quarter inches. Now folks, you are gonna get two sets of wheel cribs. And while I say "wheel crib," I mean this is one set, and this is the second set. So again, very simple, lightweight. Again, three pounds per crib, so 12 pounds total right here, folks. Super easy to carry. Super easy to set up and display. You can show off your ride in style. We've got some pictures of customers that sent in where they've got the car tilted on one side. Maybe put a mirror underneath so they can see the underside of your car and stuff like that. So the possibilities are really endless. We also offer these ramps if you need to load your ride into your trailer effortlessly. If you have a low riding vehicle and you wanna make sure you're not hitting anything, we offer those. Those are sold separately. Check them out. Folks, that's gonna wrap it up for these Race Ramps Stackable Wheel Cribs. I'm Steven. Thanks for your time. Thanks for watching. Stay safe out there.
Race Ramps makes fantastic products; and these wheel cribs are no exception.
They were shipped & received very quickly from etrailer.com.
Very pleased with the product, they're light and serve their purpose. The price was also the cheapest I found, cheaper than [on-line retailer] or any other major retailers. Most importantly though,I'm pleased with the customer service I received from etrailer.com. I ordered 2 sets of wheel cribs, 4 in total. When I received my order I was in a hurry and on my way out of town so I set the box in the garage and didn't open it for nearly a month. Upon opening it I discovered I had only been sent one set. I was worried since it had been so long since I had placed my order that I wouldn't be able to get them to correct it. I was wrong, a short 5 minute call explaining what had happened and they had another set on the way, no questions asked. Good deals are easy to find, great service isn't. Thank you for having both.
Would recommend,makes working under the car safer,easy storage too.
Another "I should have bought these things a long long time ago" item. YES they are quite expensive if you go the modular route. However talk about easy to use. No longer will I have to jockey for frame space when I need to jack as well as put a jack stand in the same area. Will definitely make all my under carriage maintenance a breeze now. Harbor Freight's 2-ton long-reach low-profile jack had enough lift for my application without having to resort to wood blocks.
Great company to deal with. Kim provided Great customer service when I was having a problem trying to place the order on line. She followed up with updates on my order.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.