Slim Work Light for Confined Areas - Lithium Ion - 150 to 600 Lumens

See what our Experts say about this Performance Tool Camping Lights

• How Long Does Underhood Work Light LED Bar Last On A Single Charge?
  Heather, on battery you can expect about 1.25 hours of runtime. If you’ve got a long project, one of the nice features is that you can plug it in via USB and keep using it while it charges. That way you’re not forced to stop halfway through a job. For comparison, the slim # PT47RR runs longer on low, but this one puts out a much broader beam designed to light the whole engine compartment at once. Do you usually have power close to your work area, or are you more often out on the driveway...
  view full answer...
• How To Charge Slim Work Light LED And How To Know When It's Fully Charged
  Marcy, the indicator LED above the dial on the Slim Work Light # PT47RR will be red while charging, and turns blue once it’s fully charged. Easy to check at a glance! Do you plan to charge it in the garage, or off a vehicle USB port? I've even brought a portable power bank with me when doing some mobile jobs at a storage lot where there was not a good way to charge off electricity.
  view full answer...
• Does The Slim LED Work Light come With Battery And Charger?
  Hey there Lila! The Slim Work Light # PT47RR comes ready to go with a built-in rechargeable 18650 Li-ion battery and a USB charging cable in the box. Just pop the rubber cover and plug it into any USB port. Do you have any USB ports in your garage, or perhaps a power bank to use when away from power?
  view full answer...
• Does The Slim Work Light LED Have A Magnet That Scratches Painted Surfaces?
  Julie, the magnet itself is smooth on the Slim Work Light # PT47RR, but if there’s grit it could scratch, so it’s best to wipe the area or use the hook. It's also best not to slide it around; just set it and forget it until you need to pull it off the metal surface. What type of repairs do you normally do? And what vehicle/application are you working on?
  view full answer...
• Water Resistant LED Portable Magnetic Light For Mobile Mechanic
  Hey Omar! Yes, the Slim Work Light for Confined Areas # PT47RR is listed as water resistant, so splashes won’t hurt it and it'll be fine in light snow or rain. Just avoid full submersion - definitely don't want to drop it in a container of oil/coolant or a puddle etc. Do you currently have a light you use? I'm curious which one, and how it would compare to this one.
  view full answer...
• LED Portable Work Light For Getting Deep In Engine Bay Working On Car
  Ron, yes, the Slim Work Light # PT47RR Info is only 1.5 inches wide and about 15 inches long, so it’s designed to slide right into confined spaces such as by the firewall when working deep in the civic engine bay. For larger, even lighting, the # PT67RR underhood bar is a nice complement. Do you think you’d benefit from having both styles? Or what type of repair are you trying to use this for?
  view full answer...
• How Long Will Rechargeable LED Work Light Run On Single Charge (low vs high)
  Hey Brett. Figure the Slim Work Light # PT47RR will run about 10 hours on low and about 2.5 hours on high. That dial really helps you stretch runtime when you don’t need max output. Do you usually work in short bursts or marathon sessions? Other folks - what runtime are you seeing in real use on this light or similar ones?
  view full answer...
• Small LED Work Light For Mechanics That Can Dim - Variable Light Output
  Chase, the LED Slim Work Light # PT47RR has a variable-output dial so you can set brightness anywhere from about 150 up to 600 lumens - great for conserving battery in cramped areas or cranking it up when you need detail. And it's definitely slim enough to slide in a pocket and then mount in a tight spot. Planning to use it mostly under the dash or around the engine bay? Other folks tuning in - what type of light do you use for situations like this?
  view full answer...
• Is The Underhood Work Light LED Adjustable Or Fixed Mounting?
  Clint, the design is clever on the underhood light bar # PT67RR - it’s counter-balanced so the light always points straight down. That way you’re not fiddling with it every few minutes while you’re wrenching. You can also slide the bar side to side along the wires to position it exactly where you want across the hood. Another way to use it is with the magnets on the back which allow it to shine straight no matter what, instead of hanging. If you need something that you can twist or aim...
  view full answer...
• LED Rechargeable Slim Work Light That Has Magnetic Base That Adjusts Angles
  Angela, the removable 360° swivel magnetic base of the Slim Work Light # PT47RR lets you loosen the collar, set your angle, and retighten so it stays put. There’s also a swivel hook if you’d rather hang it. Where do you think you’ll mount it most?
  view full answer...
• LED Slim Magnet Light For Working On Car VS Underhood Light Bar That Hangs
  Nate, the # PT47RR slim LED light is the best for tight compartments where you need detail, while the # PT67RR underhood bar spreads bright floodlight across the whole bay for a big project. Do you spend more time in cramped cabinet spaces or engine bays, or just need an overall big light for the entire area? You may benefit from having both.
  view full answer...
• Lightweight LED Rechargeable Work Light For Hanging Under Hood With Manet
  Kara, the Slim Work Light for Confined Areas # PT47RR is very light - only about half a pound. The slim body and grip make it comfortable to hold for long jobs. It's also perfectly capable of hanging upside down or perpendicular to a mounting surface without falling off. Do you think you’d use it mostly handheld, or set it on the magnet and let it shine?
  view full answer...

Do you have a question about this Camping Light?