Video Transcript for Feature Review TorkLift Tie Downs-TL73NR

What's up everybody, Adam here with etrailer. Today we're going to taking a look at the Torklift custom-fit camper tie downs. This is gonna give us a nice place for us to take our turn buckles and have them fitted into this slot. I went ahead and measured this gap. It's about an inch long by about five-eighths of an inch wide. So all of the buckles that you have are going to work.

And if you don't have any, we have some here at etrailer but this is just going to be really nice because now we don't have to tie it down. Our camper up top, a lot of the other options are kind of near the rail of the bed of the truck and the lower we can get that tie down point, the better. It's just going to prevent your camper from being so top heavy. And that's going to help a lot with just the ride quality. You know, it's going to feel a lot less top heavy whenever you're going down the road.

So the ride's going to be a lot easier. You're not gonna be white knuckling the wheel. Just wondering what the heck's going on behind you. And then also it's just going to make the whole experience a lot easier. Another cool thing about this is we can actually adjust these, so we can have it like this.

Let's do a little measurement. So from the little tube right here all the way to the end, it's about 13 and three-quarters of an inch, but we can use that second hole and that'll bring it down to a little under 10 inches. And then also another cool thing about this. You can hardly see it like at all. It really looks like it's part of the truck, it's recessed in past the edge of the bumper.

So that's good. I just think that's awesome. And you don't really have to do much besides just pull a pin and pull the thing out and store them somewhere and you don't have anything sticking out of your truck. Just to give you an idea, we're not really taking any ground clearance out. I mean, it does stick a little bit lower but I would say it's pretty much even with our hitch but just so you know, just from the edge of the bumper right here to the bottom point of the bracket that stays on, maybe like two inches down, that's not a whole lot. And again, it's no lower than our exhaust over there. So it's definitely not the lowest point. I just like that. Super clean, super easy and low profile. One thing that we've been seeing, you guys had a lot of issues. Sometimes when you have a step from a factory, that's on the side, or even just an aftermarket step. So you will have to remove that if you want these but at the end of the day, I mean, this thing's solid. You could always use this as a step, but that is an issue. So if you do have a step, you're going to have to remove it. When it comes to camper tie downs these are the best ones that we sell here at etrailer. It's not just me saying it. It's the most popular, you guys buy a lot of them. Definitely going to be an upgrade from having something that's just up top. It's going to give you a better feel. Another thing about the other options. If you have a dually like this they're really not going to work that well, just because a lot of the times they kind of go down on the side and with the dually, we can't really have that. So this is probably one of your only options, but definitely the best. What I would pair it with though is the front half. If you're going to do the ones in the back, do the ones to the front, because you need to tie it down properly. So definitely grab that. Use the guide to find out the best kit for you and install them both front and back. There's not a whole lot really with this whole entire setup, we just took some factory bolts out, put the bracket in place and zipped it on in. And that'll do it for a look at the custom-fit Torklift camper tie..