To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
For long trips or rough roads, you want your camper to feel like part of the truck. These custom frame-mounted tie-downs secure directly to the strongest part of your rig, spreading the camper’s weight evenly across the frame. That lowers the center of gravity so you don’t end up with a top-heavy setup that sways or rocks in crosswinds. The result is a smoother, more confident drive where your camper stays put and your truck handles naturally.
These tie-downs bolt onto pre-existing holes in your truck’s frame, so installation is quick and clean with little to no drilling. The custom-fit design mounts tight to the frame with minimal loss of ground clearance, keeping everything tucked up and out of the way. It’s a solid setup you can install yourself with basic tools and be road-ready fast.
Made from sturdy steel and finished with a high-impact powder coat, these tie-downs are built to handle years of use on the road. The durable coating adds an extra layer of protection against weather, road salt, and debris so your tie-downs hold their strength and good looks over time.
When you’re not hauling, simply remove the arms and the brackets are nearly invisible beneath your truck. They stay tucked close to the frame so you keep a clean look without bulky hardware showing. It’s a small touch that makes a big difference when your truck doubles as daily transportation.
Each arm includes two pin holes so you can fine-tune how far it extends from the body. This helps clear fenders or sidewalls and lets you set the perfect reach for your turnbuckles. With two anchor holes on each attachment plate, you can offset your connections for better stability from multiple angles—keeping your camper locked down tight no matter where you travel.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, neighbors. It's Brad here from etrailer, and I'm with Dan. And Dan recently had his new truck in. He got airbags installed. And you also have an in-bed camper, probably why you have the airbags. Yes.
And so you've towed with an in-bed camper before with a previous truck, correct Yep. I have a 1996 GMC diesel. And I've carried this all over the place, up through the Smoky Mountains, and had a really good time with it. Had a blast. I got a 2000 model Lance Camper, and it's put on a 2025 Chevy 3,500.
I needed to upgrade from a 2,500 to a 3,500. So this thing will carry around. So on your previous Dually that you had, you didn't have the TorkLift tie downs I did not. I had them mounted onto the bumper to tie down to, and also at the beginning of the bed. Now with this, it's all custom fit.
And you went with the aluminum versions, right Yes, I went with the aluminum, because the aluminum, they're pretty sturdy, and I didn't want the metal to rust if I ever take this thing out in the snow and salt and everything. Are there advantages to the TorkLift over kind of the old style that you had it hooked up When I take the TorkLifts out, I can put 'em away and you won't even see that they're attached to the truck. I like to tuck things farther away so I don't bang my leg. Yeah, and you can kind of go back, you can pull those out, and it goes back to that OEM clean look. You have no idea they're even there until you're ready to hook up.
Right. So anything that you would recommend for anyone that has an in bed camper Any, you know, tips, tricks, for in-bed camper driving that you have, you know, over your years I got the tie downs here. I did install these, put 'em in there. And I extended the rods by using all thread rods. Make sure you get the good all thread rods, 'cause some of 'em we inchesre kinda loose when you put 'em in there. And then, yeah. I mean, they are really, really handy. My '96, when I'm driving down the road, it would sway back and forth. And with the Silverado 3,500, I got the airbags in there and the wiring all set up. And it just doesn't move or nothing. It just runs right on down the road. And with the diesel 10 speed transmission, shoot, I just, it just goes. Brad Yeah. Dan It's like it's not even back there. Yeah, and with tying these down, you know, a lot of times people wonder how does it stay in place. And especially, you know, if you're going to kind of mountainous areas or whatever and you're getting ups and downs or hitting bumps, it does have that potential to move. But that's why you have turn buckles. You crank those down, it's gonna keep it all in place. But the big thing is, you know, having a good attachment point. So did you ever have clearance issues with your other one when you hooked it up As far as where the turn buckle's attached, did you have any issues making contact The only issue I would have is if I hooked it on here wrong. Like if I came from the other direction, or this way, I'd have to try to swing it over. Better to unhook the bottom before you unhook the top. Yeah. If you haven't looked at the TorkLift mounting points, these are great. They are custom fit to your vehicle. So it's crucial that you use our fit guide to get the proper trim and model of your truck. Because they're, you know, these aren't gonna work on a Ford. You'd have to get the Ford-specific. But that's what makes these great. They're perfectly set up, you know, as he was saying is once they're out, it goes back to a clean OEM look. They sit proper, they're designed for this, and TorkLift really covers all of the connecting parts to be able to get your in-bed camper to work with your truck. So Dan, thank you so much. I really appreciate it. Great talking to you. You're welcome. Excited to get the brush guard on here and get you out on the road and enjoying it. I need to do some camping. (laughs) That's right, yeah. Hey, summer's coming. Have a good time. Thank you. Thank you very much, appreciate it.
Ratings & Reviews
Straw
8/24/2026
A year later, no issues with tie downs, except normal wear and tear and metal to metal wearrust progression. These tiedowns are designed great and fit function was clearly created by someone who knows not only design but install ! E-trailer is “the” place to buy rv, camper, towing etc products - the install videos are sooooo helpful ! Thx ET !
Lazer S.
8/24/2026
Lazer S.
9/16/2025
It definitely is safe the way you have them, Paul! In a perfect world, the turn buckles would be perfect vertical, but this an imperfect world and not all campers have the attachment points in the same place. If you take a look at some of the installed pictures on the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK page, you can see most of them are at an angle. It's perfectly normal. Are you running any suspension enhancement on your Silverado?
Paul
9/27/2026
These tie downs are great, so easy to use. Camper never budged a hair
Andrew N.
9/27/2026
Kate F.
8/10/2026
Thanks for the pictures Rich. We will be reaching out =)
Heather A.
4/10/2026
Looks great! What kind of camper do you have?
Lazer S.
10/14/2025
Install looks great, Megan! Especially for it only taking two hours! They were moving. : ) Happy we confirmed what you found as well. Tie downs can be a pain in the rear with all the options out there. Now I do have to ask though, have you guys thought about any kind of suspension enhancement for the rear axle? It's a little hard to tell, but it looks like the back is sagging a bit in your last picture.
Lazer S.
10/14/2025
Clay
7/31/2026
A year later and I would not do anything different. Absolutely the best system available especially paired with the fast guns. The camper is solid mounted and does not move. Yet can still be off loaded in just a few minutes. Remember good stuff isn’t cheap and cheap stuff isn’t good.
Christopher H.
7/31/2026
Kate F.
6/5/2026
Great set-up Viviana!! Glad to see you went with the best =) Where did you go for your first trip?
Nick S.
1/12/2026
I love these TorkLift tie downs, and it is great to hear you are liking the quality as well. What kind of truck camper are you going to be running with these?
Kate F.
8/20/2026
We appreciate the kind words Charles! Where did you take the in-bed camper for the first trip?
Gwendolyn Y.
9/18/2025
Install looks great, Dale! Where're you headed off to now?
Gwendolyn Y.
10/1/2025
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bob
11/1/2025
I have not had any issues at all with the tie downs.