Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
You do not have to bolt down your CargoBuckle straps. These heavy-duty adapter straps with S-hooks let you attach your CargoBuckle retractable ratchets to other tie-down anchors, maximizing your holding capacity. Rated at 2,500 lbs of break strength.
Features:
Specs:
Note: Tie-down straps should always be chosen according to their safe working load limit (WLL). The item being tied down must not exceed the combined WLL of the straps being used. For example, if you are using straps with a WLL of 1,500 lbs each to tie down a load weighing 3,000 lbs, then you need at least 2 straps to safely secure the load. To determine the maximum load, or break strength, of the tie-down strap, simply multiply the WLL by 3. The WLL is always one-third (1/3) of the maximum load. It is recommended that you always use straps in pairs.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody. This is Jeff at etrailer.com. Today, we're gonna take a look at the S-hook adapter straps for the CargoBuckle ratcheting tie-down straps for a quantity of two. Now, this part will adapt your CargoBuckle retractable ratchet straps for use with standard tie-down points. And just to show you what we're talking about, I happen to pull the G3 CargoBuckle ratchet straps. You can see they're retractable strap that's in this body here.
And if you notice, they have the hole on this. And that hole would be is where you would attach these S-hook adapter straps to. So, make sure you line the holes up. Take the included hardware, put the bolt through there. And then if you notice, once it's installed, you'll have an S-hook on this end and then your ratchet strap on this end with the hook on it.
Basically, this will make tie-down straps movable, more versatile. Keep you from having to permanently bolt straps or ratchets in your truck bed or trailer. And it'll let you hook your straps to any D-rings or other anchor points right here. As we mentioned, this bolts onto the retractor right here. Mounting hardware is included.
The straps themselves, they are made of a seatbelt quality polyester webbing material. Has a vinyl-coated steel hook on this end. Helps protect your cargo from scuffs and scratches. And it has this built-in keeper you can see right here that'll prevent this S-hook adapter strap from disconnecting. Now, this is for a quantity of two S-hook adapter straps with the hardware.
The strap dimension, just the strap itself is about five inches long, two inches wide. The overall length, from where you can attach it to the end of the S-hook is about 9 1/2 inches long. And this does have a maximum load or breaking strength of 2,500 pounds each. And a safe working load limit, which is a third of that, of 833 pounds each. But that should do it for the review on the S-hook adapter straps for the CargoBuckle ratcheting tie-down straps..
Ratings & Reviews
Kendall
3/6/2022
perfect. Stored with our trailer and used often. Fast convenient and secure. Awesome.!!!
Michael C.
11/21/2022
Great It,s a lot easier having tiedown fasten to the trailer. Not all tangled up.in a box. Everyone that have watched need load my UTV or Garder tractor have been impressed.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Hegoose
4/25/2018
The S-hooks work along with the other brackets that came with the CargoBuckles that were supplied with the trailer that I purchased