Video Transcript for Feature Breakdown: BullRing Stake Pocket D-Rings

Hi, everybody, Andy here with etrailer.com. And today we're gonna take a look at these BullRing Flush Fit Retractable Tie-down Anchors, for truck bed stake pockets. Now these heavy duty anchors are going to attach to your truck bed stake pockets, and provide tie-down points to secure your load. And they're gonna work with your S hook and J hook connections. And these are custom fit anchors that are designed to fit the 2015 and newer Ford F150 Regular Cab, Supercab and Supercrew Cab. And then the 2017 to 2020 Ford F-250 and F-350 Super Duty Crew Cab with a full rear bench seat.

And then the 2017 and newer Ford F-250 and F-350 Super Duty Crew Cab with the rear 60-40 split bench seat. And then finally, the 2017 and newer Ford F-250 and F-350 Super Duty Regular Cab, or Supercab. To confirm that these are going to work for your truck, take advantage of our vehicle fit-guide here at etrailer.com. Input the year, make and model of your vehicle. And our fit guide will let you know if these will work for your truck, or if we have something comparable that will work for you.

Now, while the factory anchor points are inside your bed where it can be hard to reach, these retractable anchor points install into your stake pockets on top of your bed rails. And these are gonna be very simple, very easy to use. You simply pop up the anchor ring, and then when you wanna use it to secure a load, you just pull that up and pull up firmly. And as you heard that click, they're going to secure into place, and they're not gonna accidentally slide down. They're gonna stay secured in this position.

And then when you don't need to use them anymore, you just simply push them down firmly, and then they're gonna be completely out of your way. So again, very easy to pull these up. You just pull up firmly and you'll hear that click. They're gonna be secured in place, immediately ready for you to use. And then when you don't need them anymore, push it down and it's gonna be nice and flush.

This flush fit is gonna be compatible with most tonneau covers. And these anchors have a weight capacity of 1,000 pounds. They are constructed of stainless steel. So that's going to resist rust and corrosion. And this nylon lower body is going to reduce sound. And the top cover is going to match the grain and color of your Ford bed rails for that nice factory look. So again, pull up firmly and it will secure in place. And then just push that down when you're done. Now, not only are these easy to use, but the installation is going to be very easy as well. And really it requires nothing more than a Phillips head screwdriver. So to install these, all you would have to do is remove the Ford pop-out stake pocket cover. And then you're gonna use a Phillip screwdriver to loosen the two screws in the anchor, so that this steel plate is going to drop down. So for our demonstration purposes, I went ahead and loosened these screws in this particular anchor. And I'm just gonna go ahead and remove it. And then you're going to grab a hold of this top cover and let this steel plate drop down. You're not gonna have to worry about this steel plate coming detached from this ring. It is permanently attached to the ring. So you're not gonna have to worry about losing it in that stake pocket. So while you're holding this cover, you're just going to guide the anchor into the hole from the side of the bed. And then you're going to pull up on the cover and that is going to allow this lower bracket to then catch on the truck sheet metal. And then once it's holding onto that sheet metal, you're going to pull up on that ring, and that's going to allow the cover to drop into place. And then once you have that cover in place, you just simply replace the screws and hand-tighten them. It is important to note you do not want to over tighten these. So that's gonna be how simple these are going to be to install. These do have a lifetime warranty. And again, this is in a set of four, but we do also have these in a set of six and a set of two, depending on how many you want. And I am including our item numbers to those sets on your screen. Now, another note that I want to make is that certain trucks have stake pockets in the front or middle near the window that are offset from the plastic rail cap. If you have this on your truck, you are going to need the sets that are going to work with your offset stake pockets. And I am including our item numbers either for a set of six, or a set of four, also on your screen for you, if that is what you need. Well, that's gonna conclude our look today. I hope it was helpful for you. Again, my name is Andy. Thank you for joining me..