See what our Experts say about this Voyager Accessories and Parts

• Compatible Voyager RV Camera For A Jensen VR187 RV Stereo System
  Yes, the Voyager RV Backup Camera w/ Night Vision # VGR84VR would be a compatible option for your Jensen VR187 RV Stereo. I found the user manual online with a diagram showing the rear and side marker camera hookups. If the rear camera wiring you have in the back of your motorhome doesn't have the female style connector for this then you would have to run an extension line yourself all the way to the stereo. We have a few different lengths depending on your needs: 10' # VGR94FR 15' # CEC15 25'...
  view full answer...
  
• Replacement AOM-713WP Voyager 7" Monitor and Compatible Camera
  Hey Andy. To replace your AOM-713WP monitor you'll need the 7" Screen Voyager RV Backup Camera Monitor item # VOM719WP. You can connect the Voyager Rear Camera item # VCMS17B or the Passenger item # VCMS12RGPR and Driver item # VCMS12LGPR side cameras from Voyager to the item # VOM719WP monitor using the Voyager Camera Extension Cable item # VGR94FR. What kind of trailer or motorhome do you have?
  view full answer...
• What Footprint Does The VCMS12RGPR Leave When Installed?
  Hey Joe, I ran out and grabbed # VCMS12RGPR from the warehouse to grab some quick measurements for you. I went ahead and measured the rubber gromet it sits on that would cover that part of the trailer for you. I will attach a picture as well. The footprint it will leave on your trailer is going to be 3-1/4" x 1-1/2". What kind of RV do you have?
  view full answer...
• Availability of Replacement Monitor for Voyager VOM-738CT
  Hi Piotr; the Voyager RV LCD Observation Monitor # VO34FR you were looking at is the correct replacement for your VOM-738CT. However, you will need a CRT 5-pin to LCD 4-pin adapter to connect them. Voyager offered this as their part number 31100041 but it is no longer available. I would try searching to see if anyone still has one, otherwise you will have to find a generic adapter cable for the monitor to be compatible.
  view full answer...
• Replacement Passenger Side Camera For 2011 Tiffin Phaeton 40QTH With Voyager DIN Connectors
  You are going to need to use the Voyager RV Side Camera # VCMS12RGPR with the Adapter # VGR54FR to connect to the 4-pin connector on your 2011 Tiffin Phaeton 40QTH.The Buyers Products Camera # BP68FR you found uses a different 4-pin connector.
  view full answer...
  
• Can Voyager RV Side Camera Replace 2015 Holiday Rambler Vacationer Mirror Camera
  Hi Michael; I suppose if you have room to mount it and have a Voyager camera system to tie it into you could use the # VCMS12RGPR. However, this is designed to mount on the side of a trailer/motorhome so I'm not sure how effective it would be in that location. I would expect you need to mount it facing back just like it would be on the side of a trailer to get a good view. I would check to see if there is a factory replacement for the mirror camera based on the chassis it is built on.
  view full answer...
• Recommended Voyager Cameras
  Hey Jennifer! Go ahead and email me that picture and I'll see if it's something we have. Meanwhile, I have listed below all of our Voyager cameras: Replacement Voyager WiSight 2.0 Wireless RV Backup Camera with Low Light Assist item # ASA64YR Voyager RV Side Camera - Driver's Side - Gray Primer item # VCMS12LGPR Voyager Compact High-Performance Color RV Rearview Camera item # VGR34FR Voyager RV Side Camera - Passenger's Side - Gray Primer item # VCMS12RGPR Replacement Voyager WiSight...
  view full answer...
• Can Side View Cameras Be Added To a Class C Winnebago On a Mercedes Chassis?
  We do carry Passenger # VCMS12RGPR and Driver # VCMS12LGPR side cameras from Voyager which is the more commonly used systems on RV's like your Winnebago. These would connect to a Camera System # VOM719WP using an Extension # VGR94FR for each camera. If you can provide me with any more information about your rear camera and the input into either a dash stereo or separate monitor I can help determine what all parts you may need.
  view full answer...
• What Is the Lens Outer Diameter for the Voyager RV Side Camera
  I actually went out to the warehouse and measured the O.D of the lens on the Voyager RV Side Camera # VCMS12RGPR and ended up with .842" which would be 2.14 centimeters - so just under and inch. I also measured the camera lens housing at .544" so just a little over half an inch. Both of these measurements you can see in the picture I've attached.
  view full answer...
  
• Replacement Voyager Monitor and Cameras For a 2008 Winnebago Sightseer With Voyager AOM713
  The Voyager RV LCD Observation Monitor # VO34FR will replace your current monitor and uses the same connection types so there are no adapters needed. We have the Rear Camera # ASA64YR which uses the same style connector. This camera works with both wired and wireless camera systems so it does have an antenna but it will work solely with your current wiring. Here is a list of our current side cameras you can use. Voyager RV Side Camera - Driver's Side - Gray Primer # VCMS12LGPR Voyager...
  view full answer...
• Replacement Side Cameras For Voyager VCMS36RGP and VCMS36LGP
  The Voyager RV Side Camera # VCMS12RGPR is the correct replacement for your vcms36rgp that you have. This will replace the passenger side camera with no wiring adapters required. We also have the driver side camera # VCMS12LGPR if you want to replace it at the same time as the camera has a different shape.
  view full answer...
• Replacement Voyager Camera With Cover For Discontinued Voyager RV Side Camera
  Thanks for the pictures! I sent those over to my contact at Voyager and while I have a replacement camera and cover option, the camera you have has been discontinued and there is not a replacement cover made any longer. The best option is going to be replacing the cameras with the Voyager RV Side Camera - Driver's Side # VCMS12LGPR and Passenger Side # VCMS12RGPR which use the new cover that you mentioned. I included videos of the products mentioned for you to take a look at.
  view full answer...
  
• Upgrading From Original WiSight to WiSight 2.0 Camera System
  Since the Voyager WiSight 2.0 Wireless RV Backup Camera System # ASA57YR uses a wireless connection from the monitor to the camera, the wiring is really only needed to provide power to each - you won't be running wiring from one to the other. It looks like you'll need to swap out the wiring harness used to get power to your camera but aside from that everything slese should be the same. We do have parts to setup a wired Voyager camera system and for that you'll need the following: -...
  view full answer...
• Replacement Side Mount Cameras For A Voyager Camera System
  The Voyager RV Side Camera - Driver's Side # VCMS12LGPR and The Voyager RV Side Camera - Passenger's Side # VCMS12RGPR are the correct replacements for you. The side mount cameras give you a 154-degree viewing angle. They have a durable, aluminum construction and are waterproof. They have a simple installation with minimal drilling required. The cameras can be used while driving or when backing up. If used for driving you need to wire up to the running lights. If used for backing up...
  view full answer...
• Replacement Monitor and 3 Camera Setup for VOM784CT that is in Color
  Hey Joey, for a replacement monitor you can use the Voyager RV LCD Monitor part # VO34FR which is color. Then for side cameras you'd want the part # VCMS12LGPR for the driver side and part # VCMS12RGPR for the passenger side. For a rear camera you would want the part # VGR84VR. Everything mentioned would be in color too like you are wanting and also would use the same connectors/wiring.
  view full answer...
• Replacement Side Video Camera for a Voyager VOM-73SNWIN System
  Thanks for the pictures and all of the detailed information! The Driver's Side Voyager RV Side Camera item # VCMS12LGPR and the Passenger Side item # VCMS12RGPR both use the same 4-pin connector that the older Voyager VOM-73SNWIN used. I have attached a picture below of the connector. I recommend verifying that's the same one as you are currently using.
  view full answer...
  
• Extension Cable and RCA Adapter For Voyager RV Motorhome Side Cameras
  To use the Voyager RV Side Cameras, Driver # VCMS12LGPR and Passenger # VCMS12RGPR on your motorhome with the RCA connections you will need a Voyager Camera Adaptor - 4 Pin Female Camera Connector to RCA Input # 31300006 for each camera. You will also need either a 15' Extension Cable # CEC15 or 25' # CEC25 to route the camera cable to your monitor based on your camera placement.
  view full answer...
• What Side Cameras Are Compatible With Voyager Rear View Mirror Camera Monitor # VOM74MM?
  The Driver # VCMS12LGPR and Passenger # VCMS12RGPR side cameras are compatible with the Voyager Rear View Mirror Camera Monitor # VOM74MM. You are likely going to need the 10' Extension Cable # VGR94FR for each camera depending on how you plan to mount the cameras. We do have longer extensions if necessary.
  view full answer...
• Replacement Passenger Side View Camera For a 2010 Tiffin Allegro Red Open Road 38QBA
  Unfortunately Damien, I have no way to see exactly what parts are on your 2010 Tiffin Allegro Red Open Road 38QBA. It would be best to pull off your current camera and check for any manufacturer information on the camera. You can also check the connector to see if you have one like the Voyager # VCMS12RGPR or Buyers # BP68FR. Please let me know what information you find on the camera and if one of the connectors matches what you have.
  view full answer...
• Is There a Replacement Monitor For The Triplevision Camera System In a Tiffin Allegro Motorhome?
  Jim, I do not see that anyone makes a replacement monitor which is compatible with your Triplevision cameras system on your Tiffin Allegro Red 34FQA motorhome. This means you would either need to try and find a working original monitor or switch to a system like the Voyager # VGR97VR along with the Side Cameras # VCMS12LGPR, # VCMS12RGPR and 2 Harnesses # CEC25
  view full answer...
• Replacement Monitor for a Voyager VOM-873CT and Other Parts That May Be Needed to Switch to Color
  I tried looking up the cameras you would have, but I could not find anything definitive to indicate if they would be in color or not. Obviously having to get all new cameras would not be ideal. You could start with the Voyager RV LCD Observation Monitor # VO34FR and the adapter # 31100041. Test it with you current cameras, if they are in color then you are good to go. If they are in black and white, then you would need new cameras. - Voyager Rear Camera # VCMS17B - Voyager RV Side Camera...
  view full answer...
• Will Voyager Side Camera # VCMS12RGPR Replace Voyager Camera
  Yes the Voyager side cameras part # VCMS12RGPR would plug right into the wiring you have now since you have a Voyager camera setup currently.
  view full answer...
• Type of Wiring Connector Used by Voyager Right Side Observation Camera VCMS12RGPR
  You can compare the type of connector used for the Voyager Right Side Body Camera # VCMS12RGPR to the one in your RV to determine if they are the same. These can vary by brand of RV. I linked a photo showing the 4-pin connector for this camera. If an extension cable is needed we offer them in many lengths, such as 15-foot # CEC15 and 25-foot # CEC25.
  view full answer...
  
• Voyager Side Body Observation Camera Suitable for Custom-Painting
  If you wish to custom-paint the Voyager camera you want to use the grey primed version # VCMS12RGPR so that the custom paint will adhere properly. The pre-painted version will not take your paint as well as the primed one. This one costs more because it is made in smaller quantities that the pre-painted model # VCMS12RWTR.
  view full answer...

Do you have a question about this Accessories and Part?