SeaSucker Universal Fillet Station - Vacuum Mount - White

Video Transcript for Review of SeaSucker Boat Accessories - Accessory Mounts - SEA79QR

Hi, everyone, Steve here with etrailer.com. Today we're looking at the SeaSucker Universal Fillet Station. It's a vacuum mount and white color. So I wanna start off with apologizing for the lighting looking kinda dark. Because this is so bright white and matches the table, I had to lower some settings on my camera for this to show up a little better. So I apologize for me looking dark and everything.

So getting into the table itself, this is a lightweight table. It's gonna be perfect for creating a small workstation on your boat. As you can see, it has three different vacuum suction, pump-activated vacuum mounts, rather. And these I've got mounted here on the base, but you could also mount them, there's two holes here on these corners. You can mount them that way if you we inchesre gonna go straight up and down on something like this and you needed, you know, a shorter one.

So what's need about this table is there is versatility. On the bottom, you can pull this pin and you can move through all of these different holes of adjustment. So let's say you we inchesre mounting this on an uneven surface and you needed to suction that to something, and these would be kinda up sideways suctioned to a wall. You have that versatility with that center one moving like it does. So this again is a fillet table.

It's very nice and rigid, lightweight. You got slots here where you can put the knives in and stuff and then all of the drain holes here on the side and whatnot, if you need to spray it off and get blood and stuff washing away in seconds. So very simple to use. The tray can overhang the side of the boat for quick disposal while keeping the boat clean. You can put it on the back corners of the boat maybe, those kinda things.

And again, it's a rigid plastic material, so it's lightweight and durable. (mount thumping) As far as the suction cups, let me go ahead and pull the pin on this guy so we can get this easier to view. I'll set that outta the way. So these are what you're gonna be using, these vacuum mounts. They all come with these (plastic thumping) plastic covers. And what these do is they keep this vacuum surface clean of nicks, burrs, debris, that kinda stuff. As far as mounting it, you have this orange indicator. All you simply have to do is start (button clicking) pumping this up. And what it's doing is it's vacuuming out all the air from underneath the suction pad. And it needs to be a nonporous surface. I'm not even sure if it'll do it here on the table. It may, but it may take a little while. But basically, you'll keep pumping until all the orange disappears. And that's the visual indicator that this is now suctioned to the table. Now again, because I don't have a nonporous surface here, it's not gonna work. But it would have a hold of 360 pounds. And when you combine that with the other two, this is not going anywhere whenever it's installed. So again, I'll try it here just so see if it'll suction to this. (button clicking) But this is a, okay, there we go. So as you can see, it's suctioned. It's holding on nice and tight. To remove that suction, there's a little rubber indicator or tab here, if you will. You just simply pull up on one of them, and that releases that vacuum with ease. So very nice. And then always, always put on these case covers here or these covers, rather, to protect that pad from any burrs, nicks, debris, anything like that. 'Cause you don't want air to be leaking. So again, folks, this is the fillet table. Overall, 18 by 12 inches, and the work surface inside is 17 by 11. We also offer this in black color. If you wanna get black versus white, that's sold separately here at etrailer.com. That's gonna wrap it up for our look together. I'm Steven, thanks for watching.