# 1
Rhino-Rack Ski and Snowboard Carrier - Locking - 6 Pairs of Skis or 4 Boards
E trailer I have a 2019 Mazda6 and purchased the rhino rack series 2500 parts (fit kit #DK289, foot pack #RRRLKVA, aero crossbars#RRVA126B-2), and the rhino rack snowboard/ski carrier #RR576. My car does have fixed mounting points underneath the strip on the roof so I opted to add them to my roof and not use the clamp for kit that goes in the door jam. Every time I entered the year, make, and model of my car, the parts came up with the clamp fit kit part #DK387 which I did not want. But after some research, I found the correct fixed mounting point fit kit. The site of course told me that this part wouldn’t fit my car but after looking at the customer reviews, I saw them used on Mazdas. All of the rhino rack instructions were not the best. We did have to make some adjustments. One of the instruction packs tells you how long you’re supposed to cut the rubber pieces that go into the crossbars based on your car but unfortunately, the measurements were wrong for my car (picture- front 166mm is wrong). The front bar length was about an inch too short and I had to add more rubber to make it longer to fit the fixed mounting points on my roof. After some time of trying to interpret the instructions, and looking up whatever available instructional videos were online, we finally finished installing them and they do look really nice. At higher speeds on the highway I can definitely hear more noise. The actual snowboard carrier is fine, fits all 4 boards fine. It is a little difficult to close once I have my boards in there because you have to push the top bar all the way down and hold it down to be able to turn the key to lock it. I’m just happy I don’t have to shove the boards in my trunk. I do like that all the parts in this series come with locks and keys. So far no problems. Overall good product.
This rack works great with the four pairs of skis I lugged from Oregon to Alaska. I'm using it on the beef rack cross bars that came with my go fast camper which are very difficult to find mountings for. This one worked great though with a little bit of metal grinding on the bolts that slide into the t-slot of the rack. It locks and unlocks fairly easily (with a little bit of jangling involved), but so far so good!
# 2
Rhino-Rack Ski and Fishing Rod Carrier - Locking - 2 Pairs of Skis or 4 Fishing Rods
My second Rhino Rack. I use the racks for skiing and fishing pole. I travel a lot and have never had a problem with them. The Installation is simple and can be completed in under 15 minutes. Etrailer was cheaper than amazon, didnt charge for shipping, and I got the rack a few days after ordering. Would totally recommend etrailer.
Product arrived very well packaged and on time. It’s very robust and came with locks installed. It’s also set up for T-bolt rails which I needed. It was also a few dollars less than Amazon. etrailer is great to deal with and their YouTube videos on this and other products are extremely helpful.
# 3
Rhino-Rack Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
Howzit etrailer.com & staff. the rack itself is sturdy and more aero than comparable units. For my 2017 Subaru Crosstrek (OEM) Aero Bars, it was necessary to shim the (rear) lower/leading edge clamp assembly with two 1/8” x 1.5” x 1.5” (EPDM) rubber pads. The bars are shaped like a wing – and these shims helped to level the rear rack with the one in front. Overall - it looks very clean and functional. I might screw on some rubber ends over the ends of the mounting bolt to complete the project. Time to make some turns. Thank you!!
In what universe can you fit 2 snowboards in this thing?! What a waste of money, but the bigger one if you actually need to carry more than one snowboard!
# 4
Rhino-Rack Ski and Snowboard Carrier - Locking - 3 Pairs of Skis or 2 Boards
I think these racks will be excellent during ski outings for many years. I attached them directly to the C-grooves on my Aero bars rather than using the provided clamps. The C-groove attachment is stronger and slightly lower profile. I love the large release buttons!.
I can't ski, I fly fish. However my oldest decided to try downhill skiing after being gifted a pair of skis. I am budget minded should the skiing not work out and after breaking many rod tips decided this might solve 2 problem. I am very pleased w/this equipment holder. It has transported skis & ski poles too and from and no longer does my oldest have to dodge skies coming over the back seat. So far it has taken abuse from the rain (& freezing rain), snow, ice, rapid warming, road salt, and upwards of 70mph and there has been no shifting, loosening, breaking of plastic or any other noticeable problems. I am excited for spring to see how it transports my fly rods.
# 5
Yakima FatCat EVO 4 Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
I actually ended up buying a second set so I can fit a total of 8 pairs of skis on my jeep. I love the quality and ease of installation. It’s an easy to use system and love that my skis are secured.
These are extremely easy and quick to install. Love the aerodynamics of them as well as it's quality craftsmanship. Very pleased with this item and with the delivery speed! From North Shore Oahu....MAHALO
# 6
Kuat Grip Ski and Snowboard Carrier - Slide Out - 6 Pairs of Skis or 4 Boards - Black
Rack works great. Slide out makes loading and unloading much easier. So far we only put five pairs of fat skis on. Might have room for one more pair if I closed the gap between pairs but we didn’t need six pairs for that trip. Only problem was the rack froze up after driving through fresh rain. We had no problems with freezing while driving through salted slush. So far we’ve used it on two longer ski trips to CO from AZ. It’s quiet and strong. We once had a cheaper rack release our top model, expensive, skis onto the highway at 65 mph. That’s why I bought a Kuat.
These rack are great, I have them on both of my SUVs all winter. The etrailer seevice was excellent as well.
# 7
Yakima FreshTrack 4 Ski and Snowboard Carrier - Locking - 4 Pairs of Skis or 2 Boards
I love this ski rack and the service I got while making the purchase from etrailer! This rack securely holds up to 4 pair of skis and is super easy to put on and take off of the roof. I would highly recommend this rack to anyone. I would also highly recommend purchasing this product and any other rooftop rack needs from etrailer
We added two more racks to the two we already had on our Jeep. Easy to install and use
Rhino Rack Roof Rack Review - 2017 Volkswagen Golf
Speaker 1: Today on my 2017 Volkswagen Golf, we're going to be test fitting the Rhino-Rack Vortex Aero roof rack system. This is going to consist of part number RRVA137B-2, those are the bars here. These also come in silver as part number RRVA126S-2. We'll also be using part number RRRLKDA, these are the 2500 series legs for the Vortex Aero crossbars. And finally, part number DK390, and this is the fit kit that clamps around your existing door frame.This is a great roof rack system that will help you carry wide variety of accessories on your roof while freeing up space inside your Golf. Such as bike racks, cargo baskets, or smaller cargo boxes.
Yakima JetStream Crossbars Installation - 2016 Volkswagen Golf
Today on our 2016 Volkswagen Golf GTI, we're going to be test-fitting the Yakima Roof Rack. It's going to include the jet stream, 50" crossbars, part #Y00425. The baseline towers, part #Y00146 The baseline clips for the front, part #Y06123. The clips for the rear, part #Y06125. To start our installation, we're going to take the end cap off of our bar. We already removed this rubber strip, the filler strip, on the bottom side. We're going to take our tower, we're going to slide in to the bottom of our rail, we're going to slide it in.
Yakima Q Tower Roof Rack Installation - 2015 Volkswagen Golf
Today on our 2015 Volkswagen GTI, we will be doing a test fit of the Yakima Q Tower roof rack system. For your round bar here, it's going to be part number Y00408. You also have your Q Towers, which is going to be part number Y00124, as well as two sets of foot packs. You will have your Y00664s, which in this case, is going to be for our back bar, and on the vehicle right now, we have our Y00663. Which, the only difference is that your bars are going to be a little bit shorter on the front than they are on the back for the Q clips here. We'll go ahead and go through how to get everything assembled. We will be using a few different tools, as well.
Thule Traverse Roof Rack Installation - 2010 Volkswagen Golf
Today on our 2010 Volkswagen Golf we'll be test fitting the Thule Traverse Roof Rack System, part numbers THLB50, TH480, and THKIT1321. We'll begin our test fit by first opening up the front doors of the vehicle. We'll then use an allen wrench to loosen up and remove the black plastic covers which will allow the barbs and the clips to go up into. With this done, we'll place the front load bar onto the front of our roof. We'll then take some cleaner to clean off the roof where our protective padding is going to be. Now since there's already a hole where the clip is going to be into, you can use that as the halfway point to place your clear protective pad down. We'll then peel off our clear protective padding and carefully place it onto the roof, being careful as the underside of the protector is extremely sticky. We'll repeat these steps for both sides. With this done, we can place the front load bar onto the front of our roof.
What our customers are saying:
"Thanks for the great service. The order arrived at my doorstep yesterday afternoon. Thank you for making sure the order was complete. I installed the hitch and wire kit last night with no problems. The instructions were perfect. Bruce"