# 1
Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts
It's a fairly tight place to get into on a Tacoma to install, but once the heater is installed, the fit is good and snug. The heater works great, I have heat coming through the vents less than 3 blocks from my house. I would recommend this product to anyone.
Well this item installed on my 2020 Toyota RAV4 did fit but it is not as easy as with earlier models and located on the front left hand side (down low) instead of on the right hand side bank. I used the factory block heater installation instructions as a guide but found some of the steps unnecessarily (for example removing the air box). In any case be prepared to do a lot of it by feel because you cannot see the hole it slides into in the block unless you use a mirror and flashlight. The installation process took me about 2 hours.
# 2
Kat's Heaters Thermostatically Controlled Circulating Tank Heater - 120V - 850 Watts
worked for me
Here is a photo of the engine warmer installed in a 1996 CK-3500 Chey Silverado 1 ton crew cab - Vortex 350 V8 engine. I had already installed one of these, so it was a bit easier this time around. It is a very tight fit, but worth the effort because it really makes a world of difference starting the engine out here in the Wyoming winters. Because I am a Fireman, the need for me to just go when called is paramount, and this unit makes that possible even when the temps are below zero. Thank you for having these available, the auto parts store where I bought the last one no longer stocked them. I am very pleased that it came right to our ranch via UPS too. This makes life so much easier. The website, the availability, the price and the shipping were all amazing. I will let everyone know about your company. All the way around,... 5 STARS ! Thank you very much.
# 3
Rampage Radiant Backseat Heater - 300 Watt - 12 Volt
This heater is being used to supplement an existing heater in a van. I like that it was very easy to install. I also like the physical size of the heater. After using it throughout some cold days in November I felt that it might be best suited for a very small enclosed space, like the size of a tractor cab in temperatures that don't go below 45F. I wouldn't recommend it for an area larger than 300 cubic feet. I can barely feel the heat emitting from the unit when my hand is 6 inches directly in front of it. I went into the purchase with fairly low expectations so I'm glad that I didn't spend more than $[XX] to purchase this heater.
Okay, not great. Think for my application, I would choose something different. Quality is just so so. Not a great value for the price paid
# 4
Kat's Heaters Thermal Battery Wrap for Series 24, 24F, 27, 27F, 74 Batteries - 125V - 80 Watt
I used this through a winter in the north where it regularly is at subzero temperatures. Truck always started without any issues. I also had heat pads on the oil pan and transmission that I bought from etrailer. At -40+ degrees the truck always started relatively easy.
Already had one and it works great, really helps save your battery on cold days and makes starting/cranking speeds faster instead of the slow crank you get when your battery is cold, i consider it a must have for winter where we get to -20 easily. The last one I got was from another site and cost at least 20% more there, so definitely happy I could get the same product for cheaper here.
# 5
Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts
Had to modify it to try and get this to fit as other people showed. Wouldn't fit and because it was modified it can't be returned. It would fit but you would be taking apart the engine cooling system because of rigid metal tubes and their brackets would have to be modified as its right infront of the hole, just to fit this into the slot of the block. Not worth the effort or time unless you want to pay a large amount of money to get someone to install it. Or if you have all the tools and a lift to install it yourself, since you will be going from underneath as well as above.
Fits like the factory one. The only issue I had is that the electrical cord is a bit on the short side. Other than that the heater works great.
# 6
Kat's Heaters Custom Engine Block Heater - Frost Plug Style - 120V - 400 Watts - 35 mm
Perfect fit for the car it was designed for. Unfortunately I had to returned it, because there was already one of the same installed in the vehicle.
worked great, 2006 tundra
# 7
Kat's Heaters Ether Start Fluid Injection System - 1.6L to 4.9L Engine - 12V - Push Button
Excellent service
Have not installed yet, but looks well designed and should work as advertised. This will be replacing a factory injection system on an old IH D260 tractor. I have been able to order and receive overnight a bottle of ether from NAPA.
# 8
Kat's Heaters Ether Start Fluid Injection System - 1.6L to 3.3L Engine - 12V - 18 oz - Automatic
even though the order was back ordered the company kept me well informed thru out the waiting time ....
product that I ordered was outstanding... just what I was looking for.... shipping was fast... Thank you very much.... I will order from you again
# 9
Kat's Heaters Custom Fit Engine Block Heater - Cartridge Style - 120V - 400 Watts
Easy to install, but the heater cord passes to close of the exhaust manifold, they should provide a heat shield in the kit. Excellent product.
Looks just like what I ordered, shipping was prompt. Seems to be just what I need but it isn't installed yet.
# 10
Kat's Heaters Battery Heating Pad for Series 24 Batteries - 120V - 60 Watt
Just as advertised. This Kat's battery heater will be keeping the battery warm in a whole house backup generator for when it gets real cold here in northern Wisconsin. It's connected to a thermostatic switch that's set to turn on at 10 degrees.
Heats up well and keeps battery's warm, just the ticket for diesel pickup trucks on sub zero days. Combined with a block heater even the coldest mornings are no trouble.
What our customers are saying:
"I fond the internet sight very helpful. I was able to get answers to all my questions. The on-line installation instructions and videos were very helpful. I felt as if I had done this installation before. Fast delivery. Rich"