# 1
Lippert RV Entry Screen Door Latch - RH
This is not an exact fit. It had three little knobs on the back side that prevented it from resting flush. The screw slot did not have any horizontal room to move so i ended up having to drill two new holes. All in all it only took about 15 mins and once done it was a good fit.
My original order was lost in the mail. E-trailer sent a replacement right away. After grinding off the small tabs on the back, the Lippert screen door latch fit perfectly. Great replacement part!
# 2
Camco Deluxe RV Screen Door Cross Bar - 21-1/4" long to 28-5/8" long - Aluminum - Black
This is the second one of these I had. The first was previously mounted on our Wildcat 5th wheel and liked it so much I put one on our recently purchased Jayco. The only reason for dropping one star, is the cheap basically license plate bolts it comes with. I drilled 13/64" holes for them since they are self-tapping and one of the heads snapped off halfway in and I had to drill it out.......arrgghh! Admittedly it was cold out so the steel was brittle but was still aggravating. Then I got smart and went to the hardware store and got some automotive body bolts and nuts to mount it since I could get the the inside (see pic).
Installed the handle with ease. Wife likes it (which is good). Every RV screen door should have this handle to prevent damage as they are easily damaged by grabbing the door's cross section to close the door.
# 3
Replacement Slide for P-Series RV Screen Doors - 11-15/16" Long x 11-13/16" Wide - White
It was exactly what I needed and the color was perfect. It was a bit tight width wide and made it hard to slide so I trimmed it off a bit with a small hand planer and now it is a perfect fit. It still looks and works like new!! Thanks to etrailer for another great product!!!
I would give the panel a good rating but it won't fit. It needed to be 1and 5/8" tall to fit over the door handle. I will have to return the panel. You can see the issue in the attached photo. All other dimensions work. Thank you,
# 4
Lippert RV Screen Door Frame Striker
Exact replacement and works great. Purchased an extra just in case. Shipping was prompt.
Product is exactly what I need to fix the screen door latch on my Salem By: Forest River 26TBUD. Other than the slight shipping delay from the Manufacturer, perfect shopping experience.
# 5
Camco RV Baggage Door Catches - Polar White - Qty 2
I replaced 4 of these to replace the plastic ones that had broke. These fit perfectly. They still look and work as good as the day I put them on. Thanks etrailer
As always etrailer does an excellent job of promptly getting your order to you and their packing is outstanding. They use double wall corrugated with staples on heavy loads, which does a much better job of preventing damage to the shipment. Great job! Thank you.
# 6
Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black
It's not exactly the same configuration as the original part and had to redrill holes for the screen door. Also the price seems a bit high for a door hinge. Other than that it seems to be working well after a year of use.
Matches the part that was broken. I have to use the existing screws, but no complaints.
# 7
LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen - 92" Wide
This is a classic example of a product designed manufactured and marketed by people that don’t use it themselves. The screen blows out of the track with slightest cross breeze or any other breeze. I threw your tracks away as they are useless. The only place these tracks would work is indoors at the RV Expo. The tracks I designed hold the screen in place. Now that I spent time rebuilding it it’s quite nice. Thank you for asking.
# 8
LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen - 96" Wide
It leaves about an 1 1/2” gap at the bottom of the screen because the retractor needs to move that much to lock into place. It come with no mounting screws, and the instructions are somewhat vague. Also be aware that if you’re tailgate latch mechanism has an inside plate that pulls against the inside door frame the screen side channels will need to be moved a little over 1/4” back to allow clearance. I barely had enough room between the happyjac bed/couch lift framework and the doorframe for the latch pivot plate
Installation instructions are vague, had to Google for better directions. Still had to adjust instructions to fit it in. This screen wall does not reach all the way to the floor in our Toy Hauler, leaves a 1 1/2" gap at the floor.
# 9
Lippert Thin Shade Window Shade for Thin Shade Ready LCI Entry Doors
Fairly easy to install. Best to remove plastic window frame to intall. Cannot understand why these are not installed at the factory to begin with!
Good quality material , easy install on pre-fit entry door window. Only issue the latches are fairly hard to latch shade into place
# 10
Lippert Thin Shade Complete Window Kit
I appreciated the directions for installing the blind, but there were no instructions for installing the window. The window is pretty straight forward, but I didn't know what the plastic tabs were for...I watched a youtube video and figured out they were for uninstalling the old window.
Fit & Finish of the product is very good. Minimal difficulty in installation. As others have stated, ensure that the Blue Masking Tape is used while both removing old door window & installing the Lippert window.
# 11
Replacement Entry Door Hinge for RV - 6 Leaf - White
The door hinge was an exact match to the hinges on my 2012 Sabre 5th wheel. I replaced 1 of the 3 and it resolved the binding and eliminated the annoying sqeak.
Installed easy. I had to replace 2 hinges after being crushed while bringing in a slide out on my 5th wheel. The cost between the what I ordered and replacing the original part was almost 4 times more. ( I needed black) Ordered the available white, do to me being cheap and just needing the door to operate appropriately. My rv has two entry doors and this is the secondary door. White and friction hinge was not a priority. Arrives in a bag. No white sheet or instructions. Although it's self explanatory. Reused the screw fasteners from the original hinges holding the screen door and holding the door hinge in place to the frame. Used a grinding wheel for rivets holding the door hinge to the frame. Installed the new hinges with existing screws and replaced the rivets with #8 self tapping sheet metal screws. Predrilled holes with 9/64 drill bit. (recommended 11/64) Screws went in nicely with a moderate drive. Quite happy with the results.
# 12
LaSalle Bristol CrossBreeze Adjustable Toy Hauler Screen - 99-1/8" Wide
# 13
Classic Accessories Toy Hauler Screen for Fiberglass or Aluminum Toy Hauler
Thanks for fast shipping. I did open the box and everything was included. We plan to install the screen door this weekend. So we are ready to go for the Rose Cup / PWC races at PIR July 13-14-15 My son bought a fifth wheel race car trailer which the screen door will be installed. The cool 12v lighting system will be nicely displayed in the evening through the screen. One of the main reasons for buying this style of screen door is the clean solid fit look. Instead of either making one of buying a magnetic closure. This is my second purchase with etrailer.
Easy install, appears to be good quality.
# 14
Screen Defender Screen Protector for Lippert RV Entry Doors - Fits Doors 24" Wide
Love it! Keeps our Doodle from running through the screen. etrailer.com shipped the Defender in a box that prevented the screen from getting damaged. I initially ordered it from Walmart. However, they shipped it as is, so the top part of the screen was warped. I returned the damaged defender and ordered from etrailer.com. Our front door Defender also arrived damaged, so I going to order the 30" from etrailer.com next. From now on, I'm going to etrailer.com for all of our travel trailer needs first.
Have had it installed for over a year of use! Has protected the screen from elbows, feet, pet-pushing .....all of the above!! A great addition that keeps me from having to re-screen endlessly! I always find what I need on etrailer
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"