# 1
Thule Passage Trunk Bike Rack for 2 Bikes - Hanging Style
The Thule Passage Trunk Bike Rake for 2 bikes is a good product. I used it to transport my mountain e-bike. I choose this particular unit because it can handle the weight 2 of bikes (non-e-bikes) and the weight of my e-bike is equivalent to weight of 2 bikes. Note: Must readjust the straps after mounting the bike to the rake.
great! works really well, and a lot easier to attach than I anticipated. We drove with bikes across the country from south west all the way to North east. solid rack!
# 2
Thule Passage 3 Bike Carrier - Trunk Mount
Way too light duty for what is advertised. It seemed to be made out of 1/2 inch electrical conduit. I would never put three bikes on that rack. I only had two bikes on the rack. While on trip through Idaho the wind was so strong that one of the bikes partially blew off the rack. We traveled 1,800 miles and upon arriving home I actually sawed the bike rack up and threw it away so that no one else would use it and cause an accident. I've already found a different brand that is HEAVY DUTY and I will stick with that brand.
This is definitely more of a 2 bike carrier vs 3 bikes. I had to take the front wheels off two bikes to get three bikes on this carrier. Also, it rubbed the paint off on the trunk of my Subaru legacy.
# 3
Yakima FullBack 3 Bike Rack - Trunk Mount - Adjustable Arms
Performed perfectly on a 140 mile round-trip in my 2017 Acura MDX. It took me a few tries to position the anchors inside the top of the hatch, but I got the hang of it and the rack did not shift at all while driving 50-60 mph on the highway.
After searching for a bike rack for my 2015 Hyundai Sonata, I settled on the Yakima Fullback 3. I initially wanted a roof rack so I could carry my bikes and kayaks, but my options with the panoramic sunroof were limited and expensive. Part of the Sonata trunk lid is plastic so I was very hesitant to use a trunk mounted rack. It seemed that most Sonata owners were using a trunk mount rack, so I placed my order on a Sunday evening. etrailer shipped it the next day and I received the rack on Thursday. It took about 10 minutes to unpack, read the instructions and install it. I put both my mtb and road bike on and went for a test ride. The rack was more stable than the hitch mounted rack I had on my old vehicle, and the best part was it didn't scratch my paint. It keeps the bike pedals far away from my bumper, and it was one of only a few racks that would clear my factory spoiler. It folds up and I can stick it in my trunk while I ride. The only reason for the 4 stars is that the rack is fairly heavy. It would be nice if Yakima could find a way to lighten it up while keeping the rigidity and price where it is now. Otherwise, I'm completely satisfied with the rack and the service from etrailer.
# 4
Yakima HangOut 2 Bike Rack - Trunk Mount - Adjustable Arms
When I started the search for a bike rack, I was so disappointed and upset to hear that I would need to install a hitch and spend even more money to buy another bike rack for my 2016 jeep renegade. I ordered this bike rack with a little hope but got a huge surprise! Not only is it super convenient and easy to install but I can fully use my trunk and not spend a ton of money!
Very nice, works well. The only thing that was an issue was with the "Anchor" part of assembly. The straps it came with were 2-3 ft. too short. So I had to replace/substitute my cargo straps for the Yakima top straps. Other than that, I'm pretty satisfied with this item.
# 5
Yakima HangOut 3 Bike Rack - Trunk Mount - Adjustable Arms
My wife and I love our bike rack and use it regularly with ease. Thank you
I have a 2017 Acura RDX. I had to be creative for the hooks and straps to work. The lower strap hook is not compatible with my hatch. And I really didn't want to have them hook under my plastic bumper, so I shut the straps in the hatch and hooked them to 2 hooks I have in the trunk. Works perfect. A picture is attached. I have a Cannondale Bad Girl, which is the dumbest bike ever designed ( but that is a different review forum) so I had to be creative getting it mounted like I usually do. Works great. The only reason I gave this a 4 star is because I don't believe the hooks are really compatible with the RDX, unless you have an awesome spouse willing to get shut in the trunk and place the hooks for you while you tighten from the outside. etrailer.com has the best customer service I have dealt with in a while. Fantastic crew!
Compatible? Yes! The Yakima FullBack 3 Bike Rack Fits a 2016 Ford Escape
Today on this 2016 Ford Escape, we're going to be test fitting the Yakima FullBack 3-Bike Rack, part number Y02633. We already have a bike installed on the rack. Let's go ahead and take a closer look and show off some of the features. How the bike is actually attached to the rack, we're going to have 3 points of contact with the bike's frame. We're going to have 2 ZipStrips up at the top here and 1 off to the side, and that's going to serve as an anti-sway strap to keep the bike from moving too far back and forth, possibly hitting the bike rack or the bikes in front of it. It also has an integrated cable lock here at the end. You'll wrap it around the bike in the front and attach it to this point here, and that's for a little bit of added security. Let's go ahead and take the bike off and set it aside.
Yakima Trunk Bike Racks Review - 2016 Ford Escape y02636
Today in this 2016 Ford Escape we're going to be test fitting the Yakima HalfBack 2 Bike Rack, part number Y02636. We already have a bike installed on the rack, let's go ahead and take a closer look and show off some of the features. How the bike is actually attached to the rack we're going to have three points of contact with the bike's frame. We're going to have two zip strips up at the top here, and then one off to the side, and that's going to serve as an anti-sway strap to keep the bike from moving too far back and forth possibly hitting the bike rack where the bike's in front of it. Let's go and take it off and set it aside. To do that there's two tabs on either side of the zip strip, you just push them in at the same time and lift them up and out. Go ahead and put them back in place for now.
Saris Bones Trunk Bike Racks Review - 2013 Ford Escape
Today on our 2013 Ford Escape, we're doing a test fit of the Saris Bones trunk mount 3-bike rack. That part number is S8801. Now, we already have our bike secured down. We're first going to show you how we do that then we'll go over some features of the rack itself. We have three straps altogether holding our bike into place, two on our frame here and one as our anti-sway strap. We're going to start by releasing our two frame straps first.
Yakima Trunk Bike Racks Review - 2013 Ford Escape
Today on our 2013 Ford Escape, we're doing a test fit of the Yakima half back 3 trunk mount bike rack. That part number is Y02635. Now we already have our bike secured in place. We're first going to show you how we do that. We have 2 cradles with 3 straps or zip strips as Yakima calls them. We're going to have the two on the top here and one as our anti-sway in the back. We can remove our bike and set it off to the side. With the bike removed, I always suggest that you replace your zip strips so you don't lose or damage them. Now we can take a few measurements.
Yakima Trunk Bike Racks Review - 2013 Ford Escape Y02636
Today on our 2013 Ford Escape, we are doing a test fit of the Yakima HalfBack 2 Trunk Bike Rack. That part number is Y02636. Now, we already have our bike secured down. We are first going to show you how we do that. We have 2 cradles in place with 3 straps, 2 on our frame and 1 as our anti-sway strap in the back. We are going to start by releasing our 2 top straps first.
Will the Yakima FullBack 2 Bike Rack Fit Your 2013 Ford Escape?
Today on our 2013 Ford Escape, we're doing a test fit of the Yakima Fullback 2 trunk mount bike rack. That part number is Y02634. Now, we already have our bike secured down. We're first going to show you how we do that. We have two cradles in place with three straps, also called zip strips. We've got two on our frame here and one as our anti-sway.
Fit Verified: Yakima FullBack 3 Bike Rack on a 2013 Ford Escape
Female 1: Today on our 2013 Ford Escape, we're doing a test fit of the Yakuma Full-Back 3 Trunk Mount Bike Rack. That part number is Y02633. Now, we already have our bike secured down; first going to show you how we do that and then we'll go over some features. We have 2 cradles in place with 3 straps, also known as 'zip-strips;' we're going to start by removing those. We have the last one here as our anti-sway. We can remove our bike, set it off to the side, and then, with our bike out of the way, I always suggest that you replace your zip strips so you don't lose or damage them. With those re-attached, we'll start off with some measurements here. First is going to be overall what we're adding to our vehicle with our arms hanging out.
Yakima QuickBack 2 Bike Rack Review - 2013 Ford Escape
Today on our 2013 Ford Escape well be test fitting the Yakima Quickback II trunk mounted carrier, part number Y02621. To begin our test fit well set the carrier onto the vehicle just below the license plate. Well put the top hook to the top part of the cargo door, the side hooks to the side part of the cargo door just below the taillights and the bottom hooks to the bottom part of the cargo door. You may have to open your cargo door to get the bottom hooks in. Well then tighten down the straps to secure the carrier to the vehicle. We can then secure the excess slack with the included tie down points.
Hollywood Racks Expedition Trunk Bike Rack Review - 2013 Ford Escape
Today on our 2013 Ford Escape well be test fitting the Hollywood Racks Expedition two bike carrier trunk mount, part number HRF6-2. To begin our test fit well set the carrier onto the vehicle using the top set of levers on the left and right hand side of the carrier we will use to adjust the carrier to the vehicle. Well take the top straps, hook them to the top part of the cargo door, the side straps to the side part of the cargo door just below the taillights and the bottom straps to the bottom part of the cargo door. Well then tighten down the straps to secure the carrier to the vehicle. Now tha the carrier is secured to the vehicle were ready to load our bike. Well use the second set of levers on the left and right hand side of the carrier to swing out the cradle arms.
Hollywood Racks Baja 2 Trunk Bike Rack Review - 2013 Ford Escape
Today on our 2013 Ford Escape well be test fitting the Hollywood Racks Baja two bike carrier trunk mount, part number HRB2. To begin our test fit well set the carrier onto the vehicle and use the levers on the left and right side of the carrier to adjust the arms. The cradle arms will need to be level or slightly angled up. Once weve established this position well go ahead and lock the arms in place. Well put the top straps to the top part of the cargo door and the bottom straps to the bottom part of the cargo door. Well then tighten down the straps to secure the carrier to the vehicle.
What our customers are saying:
"Everyone that bought before me was right! I got my rack in time for my next days off and putting it together was fast too. And I'm a grandma!! Thank you for being fast and honest! You beat anyone in my town hands down!"