Most Popular Plastic and Metal for Dodge Sprinter

I just installed this vent less than a week ago. I’m just hoping the metal vent versus the plastic one I originally had on the trailer will hold up to the weather longer.Only time will tell though. The edges of the metal around the roof flange are razor sharp. I cut my hands three or four place's. If there’s any way the factory can round these edges off better so they’re not quite as sharp.

The Ventline Ventadome was a nice upgrade to the plastic-topped roof vent I had on previously (which had a large crack in it). Super happy with the perfect fit and it opens very smoothly. Our pop-top trailer is aluminum so it blended in nicely.

Vent was easy to install, really didn't need the instructions. I would have appreciated a template for the hole though. That way I can just throw the template up and cut along it. A recommendation to reinforce the underside with something (I used 2x2s) might be helpful as well. You do say to align it with a joist, but who's really going to have multiple joists within 14 1/2" from each other? Otherwise, it looks great. I figured you have multiple images of the vent itself so I figured an image of how I reinforced it would be the most helpful for future installers. Thank you. Aaron

Product material and build is solid. Easy to install. I like the smoke colored cover, lets in the right amount of sun (we dry camp in the Southwest a lot). The fit between screen and frame with the open/close knob was off by about 1/4 inch in depth. Was able to adjust the knob mounting position down so as to insure a tight fit between screen and beauty ring. We have an eighteen-year-old rig, so it is challenging to find replacement parts that fit as original. But it fits great now! great web site - easy to drill down to appropriate parts. Thanks again.

Ventline Ventadome Roof Vent 14 1/4X14 1/4. Shipping was prompt, product arrived intact. Had to get the #10 stainless screws to install (expected them to be included) plus the butyl tape and lap sealant which I knew from the description I'd need to buy seperately. The install went without any issues. I was expecting it to fit with no trimming but ended up needing to trim each corner on my 14 1/2 inch opening. My roof thickness was right at 1 inch so needed to trim down the trim strip. How will it do in a driving rain? To be continued.....

This vent is well made and assembly was very easy. Installed with a liberal bead of flex seal caulk and flex seal aerosol as final sealant.