# 1
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
The drivers rear didn't get built correctly. the hole to put the tie done is missing. I had to drill a hole into the tie down so I could use it. Didn't notice the problem until I went to put the camper on my pickup. The other three are fine.
Forklift tie downs are manufactured to exact fit to existing manufactured frame rail holes. They lined up perfectly and after 6000 miles with camper on board have stayed secure. The only downside, (this is relative to when and ware you use you camper) they will corrode when driving through snow covered roads that have been treated with sand and/or salt. I use an oil based product to protect them corroding.
# 2
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
The drivers rear didn't get built correctly. the hole to put the tie done is missing. I had to drill a hole into the tie down so I could use it. Didn't notice the problem until I went to put the camper on my pickup. The other three are fine.
Installation was easier than I expected. Fit my 2006 Dodge Ram 2500 perfectly.
# 3
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Package arrived in a timely manner. Item was packaged well with good installation instructions. Installation was easy with no modifications needed. Product is well built and seems heavy duty.
Had these professionally installed and it took experienced techs more than two hours... Very glad I didn't attempt it on my own. After installing the truck camper, both front tie-downs settled against the underside of the truck for some reason. We slid out the end pieces and reinstalled them and then they seated properly. I've taken my 2,500 pound Northstar camper on very steep and rugged Montana roads, praying that the camper wouldn't break the tie-downs or chains. The camper did slide around even with the rubber mat installed but that's it. I did install lumber in the truck bed to prevent sliding in the future.
# 4
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
I installed these on a 2001 Ram 2500. Installation more difficult on driver's side but doable. Great solid frame mounts. They work well on our camper.
Good product and fast shipping
# 5
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
Awesome help with order and expedited shipping.
Tie downs fit my truck perfectly. Easy to mount the camper on the truck by myself. Not cheap but worth every penny!
# 6
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
I ordered the TorkLift Rear frame mount tie downs for our Ford f 350 so we could secure our Lance truck camper to our truck, E-Trailer was great my tie downs arrived two days earlier then expected so I opened the box and checked everything over just to make sure everything was in great shape and everything was so I decided to put them on and it only took me five to ten minutes for both .These tie downs make it very easy to secure our Lance truck camper to our truck and also make it very safe to travel on the highways and back roads
I am glad I called in, because I would have ordered the wrong part. Thank You Jaime B for your help. Still not 100% sure this is the right part; I will find out this weekend when I install it. But I do have confidence that it is the right part. :)
# 7
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Works great on my 2010 Ram. Installed easy, the truck would most likely roll over before the camper would come out.
Solid customer service and fast shipping
# 8
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
These camper tie downs have been fantastic! They were easy to install and have made securing my camper a breeze. I really like how easy it is to pull the tie down portion of the brackets out when you aren't carrying the camper. In my opinion this is the only way to secure a truck camper.
After reviewing my options to hold a 3500lb trailer on my truck. I decided these were the only option. They are more expensive then the other options that bolt to the body and the bumper, But much more secure. The install was fairly easy, Customer service from etrailer was awesome. When not in use they are barely visable. Great product, worth every penny! Thanks again
# 9
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
I originally ordered the incorrect rear Torklifts camper hold downs for my truck. However, I called etrailer and explained my error. They not only helped me pick the correct ones, they sent them out that day. I haven’t installed the rear TC hold downs yet. I was most impressed with the free shipping both ways with no questions asked! I was issued an RMA and the refund came quickly. Very good customer service in an age when there often isn’t any service , let alone great service. The front mounts fit perfectly!
Installed on a Curt 2 1/2 receiver just put on my F350 SD Supercab Diesel SRW 4x4. This bracket does fit this truck with the Curt receiver. I found a little oil on the drill bits and a reamer to remove the last bit of metal from the holes in the receiver helped mount the brackets.
# 10
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Camper tie downs were received in just a few days. Product quality is excellent and installation on 2012 Dodge was flawless! Installed myself in a couple of hours with minimal tools. Everything fit perfectly! One of the best experiences I have had ordering online. Keep up the good work! Great product!!
# 11
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
First of all, etrailer was amazingly communicative in the delivery process, which was greatly appreciated. And these tie downs were such a straight-forward installation. Start to finish, I would 100% buy from etrailer again! Highly recommend.
The tie down kit is very high quality, and the installation instructions were spot on. Our truck is in mint condition and I wanted a tie down system that was low profile, and did not take away from the looks of the truck when camper not on it. I've not used the turnbuckles yet, but they are set up ready for work and look great.
# 12
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
I was completely impressed with the fitment and overall quality of these Tie-Downs. I ordered them on-line they came quickly and I had them on the truck within a couple of hours with no problems at all, amazing! These things are very sturdy and well-built.
Tough install drivers side but got it done
# 13
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Great packing nice turnaround time from order to reviving items cost was competitive only issue one of the sleeves was cut short more photos while installing to come
The order arrived earlier than expected and was complete. An excellent job of engineering; all the components worked perfectly with my 2018 Dodge Ram 3500 dually. There was some minor filing that had to be done on 2 of the bracket holes to allow the bolts to fit through; I suspect it was just the powder coating. However no modifications to the truck were required. The entire project took about 2 hours from start to finish.
# 14
HappiJac Camper Tie-Downs - Custom Bed and Bumper Mount - Front and Rear
Good product. I would not recommend for large campers with stock rear bumper, the bumper will get bent. I have an aftermarket steel bumper and this makes for a good secure mounting system for the rear mounts. The front mounts on my 2022 Ram 3500 crew cab were very difficult to slide up into position, absolutely a two person job, but also very tight fit causing some hidden paint damage. Overall a good product, I like it's discrete mounts that stay on the truck between uses.
works as it should and when not in use it is out of the way
# 15
TorkLift Talon Camper Tie-Downs - Custom Frame Mount - Aluminum - Rear
The Talons and the fast guns are awesome products, fit and installation was very easy. The products have held up very well and will for a long time. The extra money spent for this set up was very worth it. It takes no time at all to secure the camper down and the fast guns have never needed adjustment after initial set up. ETRAILER was great to work with and followed up after sale. Products shipped quick and were in stock. They also had lots of information posted on YouTube to ease installation. Great company, great products by Torklift!
Installed on a 2016 RAM 3500. No issues. These installed very easily but you'll probably want to use an air-impact gun to get the hitch/bumper bolts loosened.
# 16
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
etrailer is great. Torklift is great. Fit perfect on my 1999 Ram 2500 2wd. etrailer is my first stop for everything camper/trailer/hitch related.
First compliment is stocking Torklift products "In Stock". Second is great phone and customer service along with competitive pricing. This is not my first time buying from them and it won't be my last. It does not get any better.
# 17
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Some of the best customer ever. Knowledgeable, helpful and received my order way before expected.
# 18
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
The hardest part of the installation was removing the frame bolts from the truck that are reused. The instructions were clear and easy to follow, and each piece fit perfectly where it was supposed to go. You don't need to be a mechanic to get these installed, but the proper tools are a must, along with a good chunk of an afternoon.
All parts arrived in good condition. The Torklift part you recommended was the exact fit, installation went well.
# 19
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Steve Z at etrailer was sharp and very knowledgeable on the companies product. Steve was able to work with me on getting the proper camper tie downs for my 2015 Dodge Ram 1500 (Item #TLD2121). He told me when they would be arriving and they actually arrived earlier than expected. Great product, install was pretty easy, I had them installed within an hour. This is a very high quality product with heavy duty construction. They provide a secure attachment for tie downs to the truck camper. The instructions provided are adequate, but not great. I Don't normally give recommendations or endorse products, but these I am truly impressed with. Thank you so much Steve and etrailer.
Make sure the long upright is on the proper side of the bed mount.
# 20
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
Easy to install. Good quality construction. Great customer care when I ordered the incorrect version - was well handled.
fit pretty good and the device for getting the bolts in tough places was brilliant
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."