# 1
Custom DK Fit Kit for 4 Rhino-Rack 2500 Series Roof Rack Legs - Naked Roof
The rack was fairly easy to mount on my Durango. I was able to load my kayak from the side since I have a bike rack on the rear. I use a bathroom rug and flip the boat up on the car, then slide the boat directly onto the rack. I only carry it this way for short drives to local lakes. There is some wind noise at 50 mph.
Great product. Installation was simple. Fast shipment. Instructions pretty easy. Product fights perfect and looks great. 2011 Dodge Durango Express.
# 2
Rhino-Rack 2500 Series Legs for Vortex Aero Crossbars - Naked Roofs or Fixed Mounting Points - Qty 4
i George from etrailer, The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack. I highly recommend this etrailer.
I put 3 stars because its a useful functional non-harmful roof rack solution for my WRX sedan. This review lost 2 stars because the rubber top pieces get damaged upon any accessory removal or install like(bike, snowboard rails etc). Additionally, these accessories also look to be weathering quickly because of build quality. Hopefully this helps your decision! Thanks
# 3
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 54" Long - Qty 2
Perfect. Low Profile, Looks Good. Solid Rack System. Had a year and Highly recommend
Hi George from etrailer, The rack is awesome! Strong, firm hold and nice looking. When doing surveys, I put my ladders on the rack. I highly recommend this etrailer.
# 4
Rapid Traverse Feet for Thule Crossbars - Naked Roof - Qty 4
The whole experience was freakin awesome. * Ordered on-line, delivered when promised, all packages were in excellent condition, and all parts were accounted for - no shortages, THANK YOU! * The Thule roof rack design, quality of materials, comprehensive instructions were really impressive. Everything went together without a hitch and really looks good installed. * We plan on carrying our 12 1/2' SUP's on the roof rack when we head out to the lakes. * It saves us time as our SUP's are inflatable, however it takes a bit of time to pump them up once we get there. Now it's just loosen them up and we're ready to go. Great job etrailer, I would definitely buy more products from your organization!!
Etrailer helped me out of a jam as I could not find the Thule parts I needed. They not only had the parts but got them to me in a few days! Made my trip to Lake Placid possible! Fantastic communication and customer service.
# 5
Malone AirFlow2 Roof Rack - Aero Crossbars - Raised Side Rails - Aluminum - 50" Long - Silver
Super easy to put on,perfect fit. Worked great with my 20 yr old yakima rocketbox! Thank you
Good looking Roof Rack, fairly easy to install but, I broke one of the end caps and missing an Inner Foot Pad.
# 6
Yakima CoreBar Crossbars - Steel - Black - 60" Long - Qty 2
2011 Honda ElementWas skeptical at first because I needed the posts as well for my 2011 Honda Element. The Honda crossbars were not adequately weight rated and is why I opted for Yakima. Couldn't be happier with my choice as this assembly has served me well throughout the year.
Perfect. Perfect. Easy to install and high quality. Confident in this product. Excellent instructions. Used with towers of course! Towers and crossbars have demonstrated to be strong and durable with several trips with kayaks.
# 7
Yakima RoundBar Crossbars - Steel - Black - 58" Long - Qty 2
Free delivery that showed up in 3 days!!! Can't beat it. The crossbars with the Control Towers and LandingPad 9 fit perfectly on my Honda Element. Had them installed in about 30 mins. Don't have my cargo box yet and wanted to test strength, so I had my 110lb wife standing on them with no issues (yes, the car was parked). Plan to take a long camping trip next week with a cargo box on top...wife will be in the vehicle:-)
works good
# 8
Thule WingBar Evo Crossbars - Aluminum - Black - 60" Long - Qty 2
Easy install, no issues with this roof rack in almost 1 year of using it
Sturdy bars. The rubber strip gasket eventually became loose and flew off down the highway. Options available to use metal locks w/ key, instead of the plastic locks.
# 9
Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 49" Long - Qty 2
The crossbars came together with all mounting hardware, platforms and legs. Evertyhing arrived together in short time and was raasonably easy to assemble. The quality is good and solid, and all at a good price. A year later, they still look great and perform well. I highly recommend purchasing from etrailer.
2019 Jeep Grand CherokeePurchase for a 2019 Jeep Grand Cherokee, black rails. Perfect fit.
# 10
Rhino-Rack Pioneer Roof Rack Platform for Crossbars - 58" Long x 47" Wide
Works great with my 2023 Toyota Sequoia and no wind noise . This was a better option then the oem trd roof rack.
This platform rack perfect fit to my 2020 DURANGO GT. Easy assembly, easy installation and removal. I bought 2 years ago a trailer hitch receiver (code C13182) from your company and also satisfied with its use. I recommend ETRAILER.COM to all my friends. Thank you.
# 11
Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet
A little complicated to put together but they work great
etrailer was the only vendor who had the custom fit roof rack feet I needed for my vehicle. I was trying to put a roof rack onto a Dodge Durango SRT...not a typical vehicle for this accessory! I looked everywhere for a suitable roof rack and thought I was settling by ordering the Inno kit from etrailer. I could not have been more wrong! I am so happy with the purchase!
# 12
Inno Square Crossbars - Steel - Black - 58" Long - Qty 2
Great looks, feels very sturdy. Super easy to install. Only downside is they are a little noisy, but that was expected from the square bars. Went with square bars to use my older Thule kayak and bike rack systems. I installed the Inno mounting system myself...no problem. Directions were very good!
etrailer.com you guys are great every thing came on time. i bought the inno sq bar roof rack for its price point and i like the look. I have a thule roof box I need to mount . The SQ bars are a bit noisy so I plan on buying the rack faring. On the front mounting pads the directions say there is a gap but it seems extreme i will post a pic I also checked the measurements 3 times. when i get a chance i might re-adjust the front pads.. Please Advise
# 13
Inno Feet for Square Crossbars - Naked Roofs - Black - Qty 4
I have been very happy with the roof rack system.
The Inno foot pack was a good fit for my vehicle and accepted my old Thule square bars.
# 14
SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long
Easy fit on Tesla Model X. Our fitment is for carrying kayaks and the occasional roof box. I would give these 5 stars if SeaSucker had the option to pivot the front mounts 90 degrees to decrease a sloping roof angle. The front mount placement is critical on a Model X as the front glass roof slope/curve means you'll definitely need to moisten the cups and press down firmly while suctioning to get a good fit. Another recommendation is to let the racks sit for 2-3 hours and then check the plungers to see if any have released air (clean and reposition if they have). Repeat the same dry fitment with your cargo attached.
I've waited until I had a chance to install it and test it on my 2017 Mustang before wrote this. Fits perfect and ruggedly built. I thought we would never be able to transport two kayaks but they proved me wrong. Love these Monkey Bars.
DIY Install: Inno Aero Roof Rack for Naked Roofs on your 2022 Dodge Durango
Hey everyone, it's Evangeline here at etrailer, and today we have an INNO roof rack system. We'll take a look at how it fits, how it looks, and how it installs on our 2022 Dodge Durango. So why would you get a roof rack system Well, if you wanna carry around fun accessories and maybe expand your cargo space with a roof box or roof basket, or you wanna carry around kayaks or long ladders, first you need a base for those accessories. This is gonna be the roof rack system from INNO. This is gonna be the shorter length with the 54 and 57 inch bars, and it has some pros and cons to that. It is gonna be a little bit more sleek compared to the wider range, and with how INNO has the different bar sizes you also have a more custom look on the car.
DIY 2022 Dodge Durango Installation for the Inno Aero Flush Roof Rack for Naked Roofs
Hi, everyone. Aiden here with etrailer. Today we're gonna be taking a look at and showing you how to install this Inno roof rack system with the flush-mounted crossbars on our 2022 Dodge Durango. Now, when I say flush-mounted, what I mean by that is that the crossbar, that piece up top that we're gonna attach our accessories to, ends inside the foot pack here, meaning that nothing overhangs off the side of the vehicle. A lot of people prefer this style because it is a little bit more clean and custom looking. And if you only plan on mounting up one accessory on your roof, maybe something like a box for a road trip or a basket, then this is gonna be plenty of room.
Thule Roof Rack Review - 2008 Dodge Durango
Today on our 2008 Dodge Durango, we're going to be doing a test fit of the Thule Aeroblade roof rack system. It's going to be part number THARB53 and the foot pack which is going to be TH450R. As you can see up on our vehicle that we already have one on the back installed, so you can see what it'll like with those raised factory rails. We're going to show you how to place the other one on and get a proper crossbar spread for our items that we're going to be putting on. First thing we're going to do is flip it over, turn the end cap to where we can remove it. If you need to, you can also depress the little button here. Pull the end cap off and then you can slide the scale in since we won't need the scale for this application.
Thule AeroBlade Crossroad Roof Rack Installation - 2007 Dodge Durango
Today on our 2007 Dodge Durango, we'll be test fitting the Thule Roof Rack System using the Thule AeroBlade Load Bars, part number THARB53 and using the Thule Rapid and Crossroad Roof Mounted Railing Foot Pack, part number TH450R. We've already assembled our roof rack system according to the instructions so we'll begin by placing the front part of our roof rack onto our vehicle. We'll want to make sure that the straps on the feet go around our side rails. Once we have them in place, we can then make sure that we have an equal overhang on each side. Then we'll want the center of the foot with the rail by using the Aero indicator on our foot pack and bring our strap around our rail. We'll insert the end of the strap into our foot and then hold it into position while we tighten with the included tool.
Thule AeroBlade Crossroad Roof Rack Installation - 2007 Dodge Durango TH450R
Today on this 2007 Dodge Durango, we are going to be test fitting a Thule Roof Rack. We will be using the 60 AeroBlade bars along with the Rapid Crossroad Feet. We already have our crossbar assemblies put together, and now we are ready to mount them on top of the roof of our vehicle. The first thing we need to do is set the load bar up on top of the vehicle, once weve done that, we need to check a couple of things before we started to tighten it down. First we need to make sure that the load bar is overhanging evenly on both the left and right side of the vehicle and we also need to make sure that the load bar is running perpendicular to our side rails. To do that we will find a fixed point up on our side rails on either side and measure the distance from that to the edge of our Crossroad foot and make sure its the same.
What our customers are saying:
"I received this order yesterday. Thanks for the outstanding service. I appreciate it! Thanks, Alex"