# 1
Hopkins Active Tail Light Converter with Install Kit
I have ordered from Etrailer several times over the years. Always have exactly what I need. Good prices and fast shipping. Could not be happier. This wiring harness was perfect. Installed it in a few minutes. Thanks.
Excellent. The only down side for my Lexus RX300 was not having an “easy” way to mount male 4-way next to hitch rather than stowing it beside tire bay. No big deal just a plus.
# 2
Trailer End Connector - 4-Flat - Coiled
Very heavy duty industrial-grade trailer lighting cable. Cable is a little thicker/stiffer and also heavier weight than expected, but will work well with a vehicle-mounted 4-pin lighting connector.
GREAT ACCURATE REPLACEMENT WIRING.
# 3
7-Way Molded Connector w/ 10' Cable - Trailer End
As described. Got this one because of the design of the connectors as I’m troubleshooting an issue with wiring. Colors matched the rv-style one I took off my camper. The moulded plug housing is a little shorter than the one that came on the camper so it doesn’t fit in the little storage thing the same way. Functionally seems great.
I upgraded my trailer from hydraulic to electric brakes and rewired everything to neaten and freshen up things. Its a nice piece. I recommend.
# 4
35 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 42" Ground
Replaced the wiring and lights on my 1992 boat trailer. I was able to get everything needed from etrailer. I think Optronics is of the highest quality and recommend both etrailer and Optronics product.
Works very well after re-wiring trailer lights with waterproof distribution box.
# 5
Hopkins Endurance 7-Way Trailer Connector Socket - Vehicle End - Ergonomic Design
Well I wasn't able to use this as there was no good place to install on my car without it practically dragging. Not a product problem at all. I tried to return and customer service was fast and super helpful... unfortunately return shipping would eat up any refund. So.. I get to keep it. good quality and product. Very happy with it and wish I could use it. Will keep it for sometime in the future when of course I will need it.
I do not recommend this product. I bought this for my truck. It seems to be the nicest looking plug on the market but after the first rain, the plug was filled with water. I changed the location from the hitch to the bumper and once again the plug was filled with water after it rained. This condition will obviously lead to terminals corroding and/or wires being shorted out. I have bought a different style plug, unfortunately the same brand but hopefully I will have better luck. May be able to drill a small drain hole in the casing to allow water to escape but shouldn't have to do this on a new product.
# 6
Hopkins 5-Way Flat Trailer Connector w/ LED Test Lights - Trailer End - 24"
Great product! Wired this harness up with my trailer wires and have not had an issue since. A quality product!!
Worked as advertised. Easy ordering,fast delivery.Very satisfied.
# 7
Pollak 7-Pole, RV-Style Trailer Connector Socket w/ Wiring Harness and Mounting Bracket
This is the product I expected and it arrived in factory new condition. To no fault of etrailer.com the currier wagon train and the ox’en that pulled the load were heading East. This was not the direction they were accustomed to so it took a few extra days. All in all good job I will do more business with this company.
I wish than all trailer wiring was color coded the same. I have wired a lot of trucks ant trailers and trouble shot problems and always solved the problems. this one gave some serious thinking since the wiring was color coded different. But it is working and I do like the Pollak plug.
# 8
7-Way Molded Trailer Wire Connector, 4' Long
When I ordered this harness I thought I was getting a standard 7 way for a conventional trailer with brakes. What I actually got was a harness made for a camper/RV hook up. The wires have all the colors you would expect but all the lights/turn signals are coded into the plug completely different. After spending a good deal of time carefully matching, soldering and heat shrinking all connections to my new trailer harness, I was very dismayed to find only the brakes actually worked. After a bit of research I found a schematics page on the etrailer site and discovered the problem. As this is a molded plug I could not take it apart and just reposition the wires inside the plug. Another full hour or more of rewiring followed and now all is well. The harness itself is of very good quality but was not labeled/identified properly. This could have been prevented if etrailer would clearly label this harness as a camper/RV harness only.
This is definitely a good quality molded cord for the money. Route and wire this cord into a good quality junction box and you will be on your way to having some excellent trailer wiring.
# 9
Hopkins Tail Light Converter with 4-Way Flat Trailer Connector
I used the Hopkins 3 to 2 converter to make a 6-pin round to 4-flat connector for my Winnebago View motorhome. While there are 6-4 plugs available to do this, they do not work on the Winnebago View (no brake lights). This adaptor works great.
This device was no help in connecting my five wire trailer to my four wire goldwing. I ended up having to use a number of diodes in the trailer wiring to make everything work properly. My trailer had red LEDs that were used for Brake, Turn & stop and I had to get the brake and turn function to share the same lead on the light fixture.
# 10
Wesbar 4-Pole Flat Connector w/ Jacketed Cable - Trailer End - 8' Long
Very solid, heavy duty trailer lighting cable
Really quality piece. Plenty of length to connect back to the rest of my utility trailer wiring that was still in good shape since it was in an area subject to far less abuse. Nothing worse than having to fix the corroded wires in between replacing the worn out plug every few years. This should give me years maintenance free service even with the toll winter takes.
# 11
Bargman 7-Way, RV-Style Connector w/ 6' Heavy Duty Insulated Cable - Trailer End
The cord is awesome that it is flexible in the cold weather . Fair price for what I wanted .
Junction box and cable install went well. Unfortunately, didn't arrive until late in the day and had to be done with lamp and flashlight! Bit of a challenge figuring out wiring of lights but finally figured it out. Just sold the RV to a first timer and referred him to etrailer for a ball mount, ball, and trailer brake.
# 12
20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground
Just what I needed for my home-built bike carrier. My wife rides an e-tricycle and by the time I loaded the trike and a couple of bikes on this platform, you could not see the car's taillights or blinkers. This harness worked perfectly!
Wiring worked perfect for my project. I replaced the wiring on my 14 foot utility trailer. If I was to do it again I would buy the next length up. I would have liked to have a little extra wiring if I was to ever need it.
# 13
Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End
Quick shipping, will order from them again!
Exactly what I needed and It's a great fit
# 14
Hopkins Endurance 6-Way Trailer Connector Socket - Vehicle End - Ergonomic Design
The stuff not here
Very difficult to make the wiring connections, I was afraid I’d have problems on down the road so, I took it out of circuit and threw it away
# 15
Hopkins Endurance Quick-Fix Replacement 4-Way Flat Trailer Connector w LED Test Lights - Trailer End
Nice product & good value imo--it's very beefy and appears to be heavy duty---I know these are supposed to be temporary---that said this one replaced a Reese connector connector exact same style w/LEDs that was almost 17 years old before it failed--hopefully this lasts even close to that amount of time--I don't use this trailer daily usually not even weekly---so maybe with commercial trailer use this connector isn't for you..... It's my considered opinion that many of the fails are the result of a lousy install or someone disconnecting by pulling on the harness INSTEAD of grabbing the connector either way this gets an A+ from me
This is perfect. I needed an easy way to change the connector on the trailer I'm working on. It was an old pop up camper with an 8 pin connector mounted on the frame. but I only needed a 4 after rewiring it. So, out with the old and in with the new! Plus it's really easy to connect all the wires. Picture is not of the new connector but of the whole project I'm working on. I've since mounted all the running lights, tail lights etc.
# 16
RoadMaster 4-Wire Connector - Vehicle End
We just finished a makeover of our 1995 boat trailer. New bunks, sanded and painted but the best part of the project was the new LED lights from your company. They are so much brighter than the old incandescent bulbs that you really do feel safer driving down the road. We pulled the 20 year old wire out and replaced with new and used the 3M scotch loks to tie in. We were not sure the new style grommets would fit the old holes in the frame but they fit great. Your customer service was great, alerting me to a backordered reflector but recommended a replacement that worked fine. Patrick set up a Q&A page for me since I had questions about the best way to protect connections with dielectric grease, heat shrink and tape. Your website is one of the best with ease of navigation, complete pictures, great selection and thorough info, dimensions, etc. You guys really have your act together and also offer great value. I would not hesitate to purchase again and will recommend you when I can. I have attached a couple of pictures. Thanks for all your help. Wayne N.
Easy to install and works great.
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."